Skip to content

AtomicPi - Debian 9.9

Images
  • Hmm, ich bin ja bei unbekannten Quellen immer etwas ängstlich. So habe ich mir heute mal ein Debian 9.8 auf einen USB-Stick gebügelt und mal geschaut was passiert.

    Hardware

    • AtomicPi
    • passiver USB3-Hub
    • SSD Samung 750 ECO 120GB
    • Tastatur / Maus /
    • irgend ein oller USB-Stick 😉

    Software

    Eine Debian 9.8. Netzinstallation auf den USB-Stick gebügelt.

    debian-9.8.0-amd64-netinst.iso
    

    Installation

    Die Netzinstallation lief ganz ordentlich, in der nicht grafischen Installation hatte ich Probleme mit der SSD. In der grafischen Installation klappte es dann einwandfrei.

    Nach dem Neustart erscheint dann der GNOME Desktop.

    IMG_20190504_122558_ergebnis.jpg

    IMG_20190504_122629_ergebnis.jpg

    Im dmesg tauchen ein paar Fehler auf.

    [    1.721071] i8042: Can't read CTR while initializing i8042
    [    4.767862] usb 1-3: string descriptor 0 read error: -22
    [    7.999018] intel_sst_acpi 808622A8:00: No matching machine driver found
    [    9.584857] r8169 0000:01:00.0: firmware: failed to load rtl_nic/rtl8168g-2.fw (-2)
    [    9.697026] rt2800usb 1-3:1.0: firmware: failed to load rt2870.bin (-2)
    

    pastebin.com

    Da es eine Netzinstallation ist, bekommen wir die aktuellste Version aufgespielt.

    Kernel

    root@debian:/home/frank# uname -a
    Linux debian 4.9.0-9-amd64 #1 SMP Debian 4.9.168-1 (2019-04-12) x86_64 GNU/Linux
    

    Debian Version

    root@debian:/home/frank# cat /etc/debian_version
       9.9
    

    Die Installation sieht so weit sehr gut aus.

    Youtube

    Schnelltest mit 1080p

    IMG_20190504_124247_ergebnis.jpg

    IMG_20190504_124306_ergebnis.jpg

    Läuft, aber kein Sound 😞 Da fehlt was, ich habe nur die Möglichkeit der Tonausgabe auf den Mayfield Chip.

    IMG_20190504_124735_ergebnis.jpg

    Dann geh ich mal auf die Suche.

    LAN

    Läuft volle Pulle - ohne Fehler! 👏

    frank@frank-MS-7A34:~$ iperf3 -s
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------
    Accepted connection from 192.168.3.12, port 57842
    [  5] local 192.168.3.213 port 5201 connected to 192.168.3.12 port 57844
    [ ID] Interval           Transfer     Bandwidth
    [  5]   0.00-1.00   sec   107 MBytes   895 Mbits/sec                  
    [  5]   1.00-2.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   2.00-3.00   sec   112 MBytes   938 Mbits/sec                  
    [  5]   3.00-4.00   sec   111 MBytes   928 Mbits/sec                  
    [  5]   4.00-5.00   sec   112 MBytes   939 Mbits/sec                  
    [  5]   5.00-6.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   6.00-7.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   7.00-8.00   sec   112 MBytes   938 Mbits/sec                  
    [  5]   8.00-9.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   9.00-10.00  sec   112 MBytes   941 Mbits/sec                  
    [  5]  10.00-10.04  sec  4.65 MBytes   945 Mbits/sec                  
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bandwidth
    [  5]   0.00-10.04  sec  0.00 Bytes  0.00 bits/sec                  sender
    [  5]   0.00-10.04  sec  1.09 GBytes   934 Mbits/sec                  receiver
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------
    Accepted connection from 192.168.3.12, port 57850
    [  5] local 192.168.3.213 port 5201 connected to 192.168.3.12 port 57852
    [ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
    [  5]   0.00-1.00   sec   108 MBytes   907 Mbits/sec    0    107 KBytes       
    [  5]   1.00-2.00   sec   112 MBytes   942 Mbits/sec    0    113 KBytes       
    [  5]   2.00-3.00   sec   112 MBytes   942 Mbits/sec    0    132 KBytes       
    [  5]   3.00-4.00   sec   112 MBytes   941 Mbits/sec    0    132 KBytes       
    [  5]   4.00-5.00   sec   112 MBytes   942 Mbits/sec    0    132 KBytes       
    [  5]   5.00-6.00   sec   112 MBytes   941 Mbits/sec    0    163 KBytes       
    [  5]   6.00-7.00   sec   109 MBytes   914 Mbits/sec    0    245 KBytes       
    [  5]   7.00-8.00   sec   112 MBytes   942 Mbits/sec    0    287 KBytes       
    [  5]   8.00-9.00   sec   112 MBytes   939 Mbits/sec    0    335 KBytes       
    [  5]   9.00-10.00  sec   112 MBytes   941 Mbits/sec    0    335 KBytes       
    [  5]  10.00-10.04  sec  4.28 MBytes   941 Mbits/sec    0    335 KBytes       
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bandwidth       Retr
    [  5]   0.00-10.04  sec  1.09 GBytes   935 Mbits/sec    0             sender
    [  5]   0.00-10.04  sec  0.00 Bytes  0.00 bits/sec                  receiver
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------
    

    wird fortgesetzt.....

  • Stunden später.......ich habe die Soundausgabe auf dem ollen Kernel nicht hinbekommen (oder zu dumm 🙂 )

    Aber, man weiß sich ja ein wenig zu helfen. Die ganzen Files mal in den Testing Zweig gebracht, sprich Buster - Debian 10.
    Vorsicht - zwei Kaffee habe ich gebraucht.

    sources.list

    # deb cdrom:[Debian GNU/Linux 9.8.0 _Stretch_ - Official amd64 NETINST 20190216-11:59]/ stretch main
    
    #deb cdrom:[Debian GNU/Linux 9.8.0 _Stretch_ - Official amd64 NETINST 20190216-11:59]/ stretch main
    
    deb http://ftp.de.debian.org/debian/ testing main contrib non-free
    deb-src http://ftp.de.debian.org/debian/ testing main contrib non-free 
    
    deb http://security.debian.org/debian-security testing/updates main contrib non-free
    deb-src http://security.debian.org/debian-security testing/updates main contrib non-free
    
    # stretch-updates, previously known as 'volatile'
    deb http://ftp.de.debian.org/debian/ testing-updates main contrib non-free
    deb-src http://ftp.de.debian.org/debian/ testing-updates main contrib non-free
    
    # backports
    #deb http://deb.debian.org/debian testing-backports main contrib non-free
    

    Kernel

    root@debian:/home/frank# uname -a
    Linux debian 4.19.0-4-amd64 #1 SMP Debian 4.19.28-2 (2019-03-15) x86_64 GNU/Linux
    

    Debian Version

    root@debian:/home/frank# cat /etc/debian_version
    buster/sid
    

    Ergebnis

    • Sound ist vorhanden

    IMG_20190504_180540_ergebnis.jpg

    Der Sound geht jetzt über HDMI, dafür ist die andere Soundkarte verschwunden. Ok, nicht so wichtig.

    • WLan/ BT zickt rum

    Youtube Video läuft mit 1080p bei ca. 10,5 Watt Stromaufnahme.

    Bitte dran denken, das man so jetzt im Testing Zweig ist, nicht zu empfehlen!!

  • Ganz schön was los im Testing Zweig von Debian 🤗

    187 aktualisiert, 139 neu installiert, 18 zu entfernen und 0 nicht aktualisiert.
    

    Alles drüber gebügelt und da ist ja auch der Mayfield Prozessor wieder.

    IMG_20190505_090138_ergebnis.jpg

  • [V] AtomicPi

    Verschoben Archiv
    2
    0 Stimmen
    2 Beiträge
    382 Aufrufe
    FrankMF

    Verkauft!

  • AtomicPi - pfSense

    Images
    7
    0 Stimmen
    7 Beiträge
    673 Aufrufe
    P

    kann ich so unterschreiben deine aussagen 😄

  • AtomicPi - Bluetooth

    AtomicPi
    1
    0 Stimmen
    1 Beiträge
    330 Aufrufe
    Niemand hat geantwortet
  • AtomicPi - Linux Mint 19.1 Xfce

    Images
    2
    0 Stimmen
    2 Beiträge
    496 Aufrufe
    FrankMF

    Das mit Linux Mint habe ich erst mal auf Eis gelegt.

    Probleme ließen sich für mich nicht lösen. Habe das auch noch schnell mit Linux Mint Cinnamon getestet - selbes Resultat. Eine Vermutung, es könnte am Kernel liegen, Debian Buster nutzt einen 4.19er, damit klappt ja alles. 🤔

    Debian Buster 10 schnell eben noch mal installiert, kein Problem. Firefox, LAN, Sound sofort startbereit. Für das WLan Problem kennen wir ja die Lösung. Ich bleibe dann mal momentan auf Debian Buster 10.

  • AtomicPi - Was geht?

    Angeheftet AtomicPi
    1
    0 Stimmen
    1 Beiträge
    601 Aufrufe
    Niemand hat geantwortet
  • AtomicPi - UART

    AtomicPi
    2
    0 Stimmen
    2 Beiträge
    439 Aufrufe
    FrankMF

    Das mit dem systemd Dienst oben könnt ihr vergessen 🙂 Das würde die Konsole viel zu spät starten, wir brauchen die ja viel früher. 😉

    nano /etc/default/grub

    Inhalt der Datei

    # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="console=ttyS0,115200n8" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" ## Serial console GRUB_TERMINAL=serial GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"

    Grub ist der Bootloader, damit wird jetzt sofort beim Start die serielle Konsole geöffnet. Nach dem Ändern der Datei, müssen wir den grub noch aktualisieren.

    sudo update-grub

    Danach kann man neustarten. Nun sieht man nichts mehr auf dem HDMI-Monitor, sondern alles in der seriellen Konsole. Wenn man nach Fehlern sucht einfach unverzichtbar. Auch das Grub Bootmenü taucht nun in der Konsole auf.

    Loading Linux 4.19.0-4-amd64 ... Loading initial ramdisk ... [ 0.000000] Linux version 4.19.0-4-amd64 (debian-kernel@lists.debian.org) (g) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-4-amd64 root=UUID=8 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007b9b3fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b9b4000-0x000000007b9e3fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007b9e4000-0x000000007ba07fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ba08000-0x000000007baeafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007baeb000-0x000000007bd80fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007bd81000-0x000000007bdeefff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007bdef000-0x000000007bffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ESRT=0x7b9e2000 ACPI=0x7b9eb000 ACPI 2.0=0x7b9eb000 SMB [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: AAEON MF-001/MF-001, BIOS MFC1AM12 01/30/2018 [ 0.000000] tsc: Detected 1440.000 MHz processor [ 0.000059] last_pfn = 0x7c000 max_arch_pfn = 0x400000000 [ 0.000301] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010131] esrt: ESRT header is not in the memory map. [ 0.011611] RAMDISK: [mem 0x31fd1000-0x34fdffff] [ 0.011631] ACPI: Early table checksum verification disabled [ 0.011640] ACPI: RSDP 0x000000007B9EB000 000024 (v02 ALASKA) [ 0.011653] ACPI: XSDT 0x000000007B9EB0A8 0000CC (v01 ALASKA A M I 010720) [ 0.011670] ACPI: FACP 0x000000007BA012B0 00010C (v05 ALASKA A M I 010720) [ 0.011686] ACPI: DSDT 0x000000007B9EB200 0160AA (v02 ALASKA A M I 010720) [ 0.011698] ACPI: FACS 0x000000007BAD2F80 000040 [ 0.011707] ACPI: APIC 0x000000007BA013C0 000084 (v03 ALASKA A M I 010720) [ 0.011718] ACPI: FPDT 0x000000007BA01448 000044 (v01 ALASKA A M I 010720) [ 0.011728] ACPI: FIDT 0x000000007BA01490 00009C (v01 ALASKA A M I 010720) [ 0.011738] ACPI: MCFG 0x000000007BA01530 00003C (v01 ALASKA A M I 010720) [ 0.011749] ACPI: SSDT 0x000000007BA01570 0041C5 (v01 DptfTb DptfTab 000010) [ 0.011759] ACPI: SSDT 0x000000007BA05738 000654 (v01 CpuDpf CpuDptf 000010) [ 0.011771] ACPI: SSDT 0x000000007BA05D90 000058 (v01 LowPM LowPwrM 000010) [ 0.011782] ACPI: UEFI 0x000000007BA05DE8 000042 (v01 ALASKA A M I 000000) [ 0.011793] ACPI: SSDT 0x000000007BA05E30 000269 (v01 UsbCTb UsbCTab 000010) [ 0.011803] ACPI: HPET 0x000000007BA060A0 000038 (v01 ALASKA A M I 010720) [ 0.011813] ACPI: SSDT 0x000000007BA060D8 000763 (v01 PmRef CpuPm 000030) [ 0.011825] ACPI: SSDT 0x000000007BA06840 000290 (v01 PmRef Cpu0Tst 000030) [ 0.011836] ACPI: SSDT 0x000000007BA06AD0 00017A (v01 PmRef ApTst 000030) [ 0.011846] ACPI: LPIT 0x000000007BA06C50 000104 (v01 ALASKA A M I 000000) [ 0.011856] ACPI: BCFG 0x000000007BA06D58 000139 (v01 INTEL BATTCONF 000000) [ 0.011866] ACPI: PRAM 0x000000007BA06E98 000030 (v01 000000) [ 0.011877] ACPI: BGRT 0x000000007BA06EC8 000038 (v01 ALASKA A M I 010720) [ 0.011887] ACPI: TPM2 0x000000007BA06F00 000034 (v03 Tpm2Tabl 000000) [ 0.011897] ACPI: CSRT 0x000000007BA06F38 00014C (v00 INTEL LANFORDC 000000) [ 0.011909] ACPI: WDAT 0x000000007BA07088 000104 (v01 000000) [ 0.012204] No NUMA configuration found

    Die vollständige Ausgabe hier auf pastebin.com

    Projekt UART erfolgreich beendet. Manche Dinge lassen einem ja keine Ruhe LOL

  • AtomicPi - Spannungsversorgung

    AtomicPi
    10
    0 Stimmen
    10 Beiträge
    933 Aufrufe
    T

    @FrankM sagte in AtomicPi - Spannungsversorgung:

    und die 12V versorgen dann die "Endstufen"

    Die FAQ meint, dass die Endstufen auch mit 5V versorgt werden aber dann einfach nicht so viel Wumms haben: https://www.digital-loggers.com/api_faqs.html#NewOS

  • AtomicPi - Images - Allgemeine Info's

    Angeheftet Images
    2
    0 Stimmen
    2 Beiträge
    415 Aufrufe
    FrankMF

    Da hat jemand einen Mirror angelegt.

    Link Preview Image AtomicPi | AtomicPI Mirror

    Grav is an easy to use, yet powerful, open source flat-file CMS

    favicon

    (atomicpi.systemonachip.net)