Skip to content

Benchmark Mainline 4.17.0-rc6

Verschoben Archiv
  • LAN (Version 4.17.0-rc6)

    Geschwindigkeit der Schnittstelle

    rock64@rockpro64:~$ iperf3 -c 192.168.3.213
    Connecting to host 192.168.3.213, port 5201
    [  4] local 192.168.3.7 port 50632 connected to 192.168.3.213 port 5201
    [ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
    [  4]   0.00-1.00   sec  99.5 MBytes   834 Mbits/sec    1    344 KBytes       
    [  4]   1.00-2.00   sec  98.5 MBytes   826 Mbits/sec    0    351 KBytes       
    [  4]   2.00-3.00   sec  98.5 MBytes   826 Mbits/sec    0    359 KBytes       
    [  4]   3.00-4.00   sec  98.2 MBytes   824 Mbits/sec    1    298 KBytes       
    [  4]   4.00-5.00   sec  97.9 MBytes   821 Mbits/sec    0    324 KBytes       
    [  4]   5.00-6.00   sec  97.9 MBytes   821 Mbits/sec    0    337 KBytes       
    [  4]   6.00-7.00   sec  97.9 MBytes   821 Mbits/sec    0    352 KBytes       
    [  4]   7.00-8.00   sec  97.9 MBytes   821 Mbits/sec    0    359 KBytes       
    [  4]   8.00-9.00   sec  97.3 MBytes   816 Mbits/sec    0    361 KBytes       
    [  4]   9.00-10.00  sec  97.8 MBytes   821 Mbits/sec    0    361 KBytes       
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bandwidth       Retr
    [  4]   0.00-10.00  sec   981 MBytes   823 Mbits/sec    2             sender
    [  4]   0.00-10.00  sec   979 MBytes   822 Mbits/sec                  receiver
    
    iperf Done.
    rock64@rockpro64:~$ iperf3 -s
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------
    Accepted connection from 192.168.3.213, port 58606
    [  5] local 192.168.3.7 port 5201 connected to 192.168.3.213 port 58608
    [ ID] Interval           Transfer     Bandwidth
    [  5]   0.00-1.00   sec   109 MBytes   914 Mbits/sec                  
    [  5]   1.00-2.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   2.00-3.00   sec   112 MBytes   942 Mbits/sec                  
    [  5]   3.00-4.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   4.00-5.00   sec   112 MBytes   942 Mbits/sec                  
    [  5]   5.00-6.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   6.00-7.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   7.00-8.00   sec   112 MBytes   942 Mbits/sec                  
    [  5]   8.00-9.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   9.00-10.00  sec   112 MBytes   942 Mbits/sec                  
    [  5]  10.00-10.03  sec  3.09 MBytes   932 Mbits/sec                  
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bandwidth
    [  5]   0.00-10.03  sec  0.00 Bytes  0.00 bits/sec                  sender
    [  5]   0.00-10.03  sec  1.10 GBytes   939 Mbits/sec                  receiver
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------
    ^Ciperf3: interrupt - the server has terminated
    

    Da gibt es noch Raum für Verbesserungen, das Ergebnis beim 4.4.126 war besser.

  • Kleiner Stresstest für die CPU

    Installation
    
        sudo apt-get install p7zip p7zip-full p7zip-rar 
    

    Test

    rock64@rockpro64:~$ 7zr b
     
     7-Zip (a) [64] 16.02 : Copyright (c) 1999-2016 Igor Pavlov : 2016-05-21
     p7zip Version 16.02 (locale=C,Utf16=off,HugeFiles=on,64 bits,6 CPUs LE)
     
     LE
     CPU Freq:  1796  1798  1798  1798  1798  1798  1798  1798  1798
     
     RAM size:    3875 MB,  # CPU hardware threads:   6
     RAM usage:   1323 MB,  # Benchmark threads:      6
     
                            Compressing  |                  Decompressing
     Dict     Speed Usage    R/U Rating  |      Speed Usage    R/U Rating
              KiB/s     %   MIPS   MIPS  |      KiB/s     %   MIPS   MIPS
     
     22:       3653   373    953   3555  |      93351   522   1525   7961
     23:       3598   363   1010   3667  |      93257   531   1519   8069
     24:       4631   488   1021   4980  |      89849   520   1516   7886
     25:       4811   493   1115   5494  |      88398   522   1506   7867
     ----------------------------------  | ------------------------------
     Avr:             429   1025   4424  |              524   1516   7946
     Tot:             477   1271   6185
    

    Ziemlich gleich, wie mit der 4.4.126. Die Frequenzen sehen aber komisch aus..

  • Speichertest

     rock64@rockpro64:~/tinymembench$ ./tinymembench
     tinymembench v0.4.9 (simple benchmark for memory throughput and latency)
     
     ==========================================================================
     == Memory bandwidth tests                                               ==
     ==                                                                      ==
     == Note 1: 1MB = 1000000 bytes                                          ==
     == Note 2: Results for 'copy' tests show how many bytes can be          ==
     ==         copied per second (adding together read and writen           ==
     ==         bytes would have provided twice higher numbers)              ==
     == Note 3: 2-pass copy means that we are using a small temporary buffer ==
     ==         to first fetch data into it, and only then write it to the   ==
     ==         destination (source -> L1 cache, L1 cache -> destination)    ==
     == Note 4: If sample standard deviation exceeds 0.1%, it is shown in    ==
     ==         brackets                                                     ==
     ==========================================================================
     
      C copy backwards                                     :   3410.2 MB/s
      C copy backwards (32 byte blocks)                    :   3409.1 MB/s
      C copy backwards (64 byte blocks)                    :   3409.6 MB/s
      C copy                                               :   3442.3 MB/s
      C copy prefetched (32 bytes step)                    :   3419.2 MB/s
      C copy prefetched (64 bytes step)                    :   3418.5 MB/s
      C 2-pass copy                                        :   3135.1 MB/s (22.4%)
      C 2-pass copy prefetched (32 bytes step)             :   3184.8 MB/s
      C 2-pass copy prefetched (64 bytes step)             :   3183.4 MB/s
      C fill                                               :   7834.3 MB/s (1.0%)
      C fill (shuffle within 16 byte blocks)               :   7861.3 MB/s (1.0%)
      C fill (shuffle within 32 byte blocks)               :   7720.5 MB/s
      C fill (shuffle within 64 byte blocks)               :   7716.6 MB/s
      ---
      standard memcpy                                      :   1815.5 MB/s
      standard memset                                      :   7751.3 MB/s (0.1%)
      ---
      NEON LDP/STP copy                                    :   1866.9 MB/s (0.2%)
      NEON LDP/STP copy pldl2strm (32 bytes step)          :   1225.5 MB/s (0.3%)
      NEON LDP/STP copy pldl2strm (64 bytes step)          :   1542.8 MB/s
      NEON LDP/STP copy pldl1keep (32 bytes step)          :   1951.1 MB/s
      NEON LDP/STP copy pldl1keep (64 bytes step)          :   1955.7 MB/s
      NEON LD1/ST1 copy                                    :   1854.5 MB/s (0.7%)
      NEON STP fill                                        :   7745.0 MB/s (0.3%)
      NEON STNP fill                                       :   4083.9 MB/s (16.4%)
      ARM LDP/STP copy                                     :   1869.4 MB/s (0.2%)
      ARM STP fill                                         :   7751.5 MB/s (0.2%)
      ARM STNP fill                                        :   2843.5 MB/s (4.7%)
     
     ==========================================================================
     == Framebuffer read tests.                                              ==
     ==                                                                      ==
     == Many ARM devices use a part of the system memory as the framebuffer, ==
     == typically mapped as uncached but with write-combining enabled.       ==
     == Writes to such framebuffers are quite fast, but reads are much       ==
     == slower and very sensitive to the alignment and the selection of      ==
     == CPU instructions which are used for accessing memory.                ==
     ==                                                                      ==
     == Many x86 systems allocate the framebuffer in the GPU memory,         ==
     == accessible for the CPU via a relatively slow PCI-E bus. Moreover,    ==
     == PCI-E is asymmetric and handles reads a lot worse than writes.       ==
     ==                                                                      ==
     == If uncached framebuffer reads are reasonably fast (at least 100 MB/s ==
     == or preferably >300 MB/s), then using the shadow framebuffer layer    ==
     == is not necessary in Xorg DDX drivers, resulting in a nice overall    ==
     == performance improvement. For example, the xf86-video-fbturbo DDX     ==
     == uses this trick.                                                     ==
     ==========================================================================
     
      NEON LDP/STP copy (from framebuffer)                 :    231.8 MB/s
      NEON LDP/STP 2-pass copy (from framebuffer)          :    222.4 MB/s
      NEON LD1/ST1 copy (from framebuffer)                 :     59.9 MB/s
      NEON LD1/ST1 2-pass copy (from framebuffer)          :     59.3 MB/s
      ARM LDP/STP copy (from framebuffer)                  :    118.5 MB/s
      ARM LDP/STP 2-pass copy (from framebuffer)           :    116.1 MB/s
     
     ==========================================================================
     == Memory latency test                                                  ==
     ==                                                                      ==
     == Average time is measured for random memory accesses in the buffers   ==
     == of different sizes. The larger is the buffer, the more significant   ==
     == are relative contributions of TLB, L1/L2 cache misses and SDRAM      ==
     == accesses. For extremely large buffer sizes we are expecting to see   ==
     == page table walk with several requests to SDRAM for almost every      ==
     == memory access (though 64MiB is not nearly large enough to experience ==
     == this effect to its fullest).                                         ==
     ==                                                                      ==
     == Note 1: All the numbers are representing extra time, which needs to  ==
     ==         be added to L1 cache latency. The cycle timings for L1 cache ==
     ==         latency can be usually found in the processor documentation. ==
     == Note 2: Dual random read means that we are simultaneously performing ==
     ==         two independent memory accesses at a time. In the case if    ==
     ==         the memory subsystem can't handle multiple outstanding       ==
     ==         requests, dual random read has the same timings as two       ==
     ==         single reads performed one after another.                    ==
     ==========================================================================
     
     block size : single random read / dual random read, [MADV_NOHUGEPAGE]
           1024 :    0.0 ns          /     0.0 ns 
           2048 :    0.0 ns          /     0.0 ns 
           4096 :    0.0 ns          /     0.0 ns 
           8192 :    0.0 ns          /     0.0 ns 
          16384 :    0.0 ns          /     0.0 ns 
          32768 :    0.0 ns          /     0.0 ns 
          65536 :    4.8 ns          /     8.1 ns 
         131072 :    7.4 ns          /    11.1 ns 
         262144 :    8.7 ns          /    12.5 ns 
         524288 :   10.2 ns          /    14.3 ns 
        1048576 :   85.6 ns          /   133.1 ns 
        2097152 :  127.1 ns          /   173.5 ns 
        4194304 :  153.4 ns          /   194.8 ns 
        8388608 :  167.3 ns          /   205.0 ns 
       16777216 :  175.4 ns          /   211.7 ns 
       33554432 :  180.5 ns          /   216.4 ns 
       67108864 :  183.5 ns          /   219.0 ns 
     
     block size : single random read / dual random read, [MADV_HUGEPAGE]
           1024 :    0.0 ns          /     0.0 ns 
           2048 :    0.0 ns          /     0.0 ns 
           4096 :    0.0 ns          /     0.0 ns 
           8192 :    0.0 ns          /     0.0 ns 
          16384 :    0.0 ns          /     0.0 ns 
          32768 :    0.0 ns          /     0.0 ns 
          65536 :    4.8 ns          /     8.1 ns 
         131072 :    7.4 ns          /    11.3 ns 
         262144 :    8.7 ns          /    12.7 ns 
         524288 :   10.2 ns          /    14.1 ns 
        1048576 :   85.6 ns          /   133.0 ns 
        2097152 :  126.4 ns          /   172.7 ns 
        4194304 :  147.0 ns          /   186.2 ns 
        8388608 :  157.3 ns          /   191.3 ns 
       16777216 :  162.6 ns          /   193.4 ns 
       33554432 :  165.2 ns          /   194.3 ns 
       67108864 :  166.5 ns          /   194.7 ns
    
  • iozone

    5GT/s x2

    rock64@rockpro64:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 
    	Iozone: Performance Test of File I/O
    	        Version $Revision: 3.429 $
    		Compiled for 64 bit mode.
    		Build: linux 
    
    	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
    	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
    	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
    	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
    	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
    	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
    	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
    	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
    
    	Run began: Sat Jun 16 06:34:43 2018
    
    	Include fsync in write timing
    	O_DIRECT feature enabled
    	Auto Mode
    	File size set to 102400 kB
    	Record Size 4 kB
    	Record Size 16 kB
    	Record Size 512 kB
    	Record Size 1024 kB
    	Record Size 16384 kB
    	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Output is in kBytes/sec
    	Time Resolution = 0.000001 seconds.
    	Processor cache size set to 1024 kBytes.
    	Processor cache line size set to 32 bytes.
    	File stride size set to 17 * record size.
                                                                  random    random     bkwd    record    stride                                    
                  kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
              102400       4    48672   104754   115838   116803    47894   103606                                                          
              102400      16   168084   276437   292660   295458   162550   273703                                                          
              102400     512   566572   597648   580005   589209   534508   597007                                                          
              102400    1024   585621   624443   590545   599177   569452   630098                                                          
              102400   16384   504871   754710   765558   780592   777696   753426                                                          
    
    iozone test complete.
    

    2,5GT/s x2

    rock64@rockpro64:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 
    	Iozone: Performance Test of File I/O
    	        Version $Revision: 3.429 $
    		Compiled for 64 bit mode.
    		Build: linux 
    
    	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
    	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
    	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
    	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
    	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
    	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
    	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
    	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
    
    	Run began: Sun Jun 17 06:54:02 2018
    
    	Include fsync in write timing
    	O_DIRECT feature enabled
    	Auto Mode
    	File size set to 102400 kB
    	Record Size 4 kB
    	Record Size 16 kB
    	Record Size 512 kB
    	Record Size 1024 kB
    	Record Size 16384 kB
    	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Output is in kBytes/sec
    	Time Resolution = 0.000001 seconds.
    	Processor cache size set to 1024 kBytes.
    	Processor cache line size set to 32 bytes.
    	File stride size set to 17 * record size.
                                                                  random    random     bkwd    record    stride                                    
                  kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
              102400       4    49420    91310   102658   103415    47023    90099                                                          
              102400      16   138141   202088   224648   225918   141642   202457                                                          
              102400     512   335055   347517   375096   378596   364668   350005                                                          
              102400    1024   345508   354999   378947   382733   375315   354783                                                          
              102400   16384   306262   383155   424403   429423   428670   377476                                                          
    
    iozone test complete.
    

  • RockPro64 - Mainline Kernel 5.9.x vom Kamil

    Images
    5
    0 Stimmen
    5 Beiträge
    402 Aufrufe
    FrankMF

    Hoppla, nach langer Zeit mal was Neues vom Kamil.

    5.9.0-1146-ayufan released

    WIP: cdn_dp hdmi audio switch
  • ROCKPro64 - Armbian armbian-config

    Verschoben Armbian
    1
    0 Stimmen
    1 Beiträge
    731 Aufrufe
    Niemand hat geantwortet
  • ROCKPro64 Armbian Image - erster Test

    Verschoben Armbian
    13
    0 Stimmen
    13 Beiträge
    2k Aufrufe
    FrankMF

    Erster dicker Fehlschlag mit Armbian 😞

    Heute versucht mein NAS mit Armbian aufzusetzen. Raid einbinden usw. kein Problem. Als es dann an Restic und GO ging war es vorbei mit lustig. Pakete zu alt, Quellen eingebunden und nur noch Fehler. Hmm!?

    Da ich nach zwei Stunden keine Lust mehr hatte, habe ich das erst mal auf Eis gelegt. Manchmal ist es besser an einem anderen Tag noch mal von vorne anzufangen.

    Nun läuft das NAS wieder mit

    rock64@rockpro64v_2_1:~$ uname -a Linux rockpro64v_2_1 4.19.0-rc4-1071-ayufan-g10a63ec6c2a2 #1 SMP PREEMPT Mon Oct 1 07:33:40 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux

    So schlecht läuft das ja nicht, wenn denn mal die USB3 Schnittstelle vernünftig laufen würde.

    Update: Manchmal muss man es auch richtig machen 🙂 https://forum.frank-mankel.org/topic/420/rockpro64-armbian-go-restic-installieren

  • 0 Stimmen
    2 Beiträge
    1k Aufrufe
    FrankMF

    This repo contains the tn40xx Linux driver for 10Gbit NICs based on the TN4010 MAC from Tehuti Networks.

    This driver enables the following 10Gb SFP+ NICs:

    D-Link DXE-810S
    Edimax EN-9320SFP+
    StarTech PEX10000SFP
    Synology E10G15-F1
    ... as well as the following 10GBase-T/NBASE-T NICs:

    D-Link DXE-810T
    Edimax EN-9320TX-E
    EXSYS EX-6061-2
    Intellinet 507950
    StarTech ST10GSPEXNB

    Quelle: https://github.com/ayufan-rock64/tn40xx-driver/tree/master

  • eMMC Modul

    Hardware
    1
    0 Stimmen
    1 Beiträge
    2k Aufrufe
    Niemand hat geantwortet
  • 0 Stimmen
    1 Beiträge
    843 Aufrufe
    Niemand hat geantwortet
  • Mainline Kernel 4.17-rc7

    Verschoben Archiv
    8
    0 Stimmen
    8 Beiträge
    2k Aufrufe
    FrankMF

    4.17.0-rc6-1029-ayufan released

    Link Preview Image Releases · ayufan-rock64/linux-mainline-kernel

    Linux kernel source tree. Contribute to ayufan-rock64/linux-mainline-kernel development by creating an account on GitHub.

    favicon

    GitHub (github.com)

    Seit 1021 funktioniert USB3.

  • Wiki zum ROCKPro64 veröffentlicht!

    Verschoben ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    1k Aufrufe
    Niemand hat geantwortet