Skip to content

Restic & Rclone & Nextcloud

Linux
  • Ich hatte mich schon mal mit rclone beschäftigt -> https://forum.frank-mankel.org/topic/27/restic-ein-backupkonzept-automatisieren?_=1584115522317

    Was ist rclone?

    Rclone - rsync for cloud storage

    Nun mal rclone auf meinem Haupt-PC, Debian Buster, ausprobieren.

    Installation

    root@debian:~# apt install rclone
    Paketlisten werden gelesen... Fertig
    Abhängigkeitsbaum wird aufgebaut.       
    Statusinformationen werden eingelesen.... Fertig
    Die folgenden NEUEN Pakete werden installiert:
      rclone
    0 aktualisiert, 1 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
    Es müssen 6.248 kB an Archiven heruntergeladen werden.
    Nach dieser Operation werden 26,6 MB Plattenplatz zusätzlich benutzt.
    Holen:1 https://deb.debian.org/debian buster/main amd64 rclone amd64 1.45-3 [6.248 kB]
    Es wurden 6.203 kB in 8 s geholt (777 kB/s).
    Vormals nicht ausgewähltes Paket rclone wird gewählt.
    (Lese Datenbank ... 238249 Dateien und Verzeichnisse sind derzeit installiert.)
    Vorbereitung zum Entpacken von .../rclone_1.45-3_amd64.deb ...
    Entpacken von rclone (1.45-3) ...
    rclone (1.45-3) wird eingerichtet ...
    

    Konfiguration

    root@debian:~# rclone config
    2020/03/14 09:20:19 NOTICE: Config file "/root/.config/rclone/rclone.conf" not found - using defaults
    No remotes found - make a new one
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> nextcloud
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / A stackable unification remote, which can appear to merge the contents of several remotes
       \ "union"
     2 / Alias for a existing remote
       \ "alias"
     3 / Amazon Drive
       \ "amazon cloud drive"
     4 / Amazon S3 Compliant Storage Providers (AWS, Ceph, Dreamhost, IBM COS, Minio)
       \ "s3"
     5 / Backblaze B2
       \ "b2"
     6 / Box
       \ "box"
     7 / Cache a remote
       \ "cache"
     8 / Dropbox
       \ "dropbox"
     9 / Encrypt/Decrypt a remote
       \ "crypt"
    10 / FTP Connection
       \ "ftp"
    11 / Google Cloud Storage (this is not Google Drive)
       \ "google cloud storage"
    12 / Google Drive
       \ "drive"
    13 / Hubic
       \ "hubic"
    14 / JottaCloud
       \ "jottacloud"
    15 / Local Disk
       \ "local"
    16 / Microsoft Azure Blob Storage
       \ "azureblob"
    17 / Microsoft OneDrive
       \ "onedrive"
    18 / OpenDrive
       \ "opendrive"
    19 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
       \ "swift"
    20 / Pcloud
       \ "pcloud"
    21 / SSH/SFTP Connection
       \ "sftp"
    22 / Webdav
       \ "webdav"
    23 / Yandex Disk
       \ "yandex"
    24 / http Connection
       \ "http"
    Storage> 22
    ** See help for webdav backend at: https://rclone.org/webdav/ **
    
    URL of http host to connect to
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Connect to example.com
       \ "https://example.com"
    url> https://nextcloud.example.de/remote.php/dav/files/User/
    Name of the Webdav site/service/software you are using
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Nextcloud
       \ "nextcloud"
     2 / Owncloud
       \ "owncloud"
     3 / Sharepoint
       \ "sharepoint"
     4 / Other site/service or software
       \ "other"
    vendor> 1
    User name
    Enter a string value. Press Enter for the default ("").
    user> Frank
    Password.
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank
    y/g/n> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Bearer token instead of user/pass (eg a Macaroon)
    Enter a string value. Press Enter for the default ("").
    bearer_token> 
    Remote config
    --------------------
    [nextcloud]
    url = https://nextcloud.example.de/remote.php/dav/files/Frank/
    vendor = nextcloud
    user = Frank
    pass = *** ENCRYPTED ***
    --------------------
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y
    Current remotes:
    
    Name                 Type
    ====                 ====
    nextcloud            webdav
    
    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> q
    

    Das sollte für Euch als Nextcloud User keine besondere Herausforderung sein. Unter https://nextcloud.example.de/settings/user/security legt ihr, wie gewohnt, das Gerät fest was auf Eure Nextcloud Instanz zugreifen darf.

    Test

    rclone ls nextcloud:
    

    Ein erster Test gab mir den kompletten Inhalt der Nextcloud Installation aus. Hmm, nicht das was ich wollte. rclone soll nur auf ein bestimmtes Verzeichnis zugreifen dürfen. Also schnell einen Ordner in der Nextcloud angelegt.

    Kurz ändern.

    root@debian:~# rclone config
    Current remotes:
    
    Name                 Type
    ====                 ====
    nextcloud            webdav
    
    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> e
    Choose a number from below, or type in an existing value
     1 > nextcloud
    remote> 1
    --------------------
    [nextcloud]
    type = webdav
    url = https://nextcloud.example.de/remote.php/dav/files/Frank/
    vendor = nextcloud
    user = Frank
    pass = *** ENCRYPTED ***
    --------------------
    Edit remote
    ** See help for webdav backend at: https://rclone.org/webdav/ **
    
    Value "url" = "https://nextcloud.example.de/remote.php/dav/files/Frank/"
    Edit? (y/n)>
    y) Yes
    n) No
    y/n> y
    URL of http host to connect to
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Connect to example.com
       \ "https://example.com"
    url> https://nextcloud.example.de/remote.php/dav/files/Frank/rclone/                                          
    Value "vendor" = "nextcloud"
    Edit? (y/n)>
    y) Yes
    n) No
    y/n> n
    Value "user" = "Frank"
    Edit? (y/n)>
    y) Yes
    n) No
    y/n> n
    Value "pass" = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
    Edit? (y/n)>
    y) Yes
    n) No
    y/n> n
    Value "bearer_token" = ""
    Edit? (y/n)>
    y) Yes
    n) No
    y/n> n
    --------------------
    [nextcloud]
    type = webdav
    url = https://nextcloud.example.de/remote.php/dav/files/Frank/rclone/
    vendor = nextcloud
    user = Frank
    pass = *** ENCRYPTED ***
    --------------------
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y
    Remote config
    Current remotes:
    
    Name                 Type
    ====                 ====
    nextcloud            webdav
    
    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> q
    

    Erneuter Test

    root@debian:~# rclone ls nextcloud:
    

    Jetzt zeigt er ein leeres Verzeichnis an. Kurz ein Dokument erstellt.

    root@debian:~# rclone ls nextcloud:
             4 Testing.md
    

    Passt. Die rclone Konfiguration ist abgeschlossen. Jetzt kann ich mit rclone auf meine Nextcloud Installation zugreifen. Und wofür das Ganze? Mit Restic, in Verbindung mit rclone, möchte ich eine Datensicherung einrichten die Daten verschlüsselt in meiner Nextcloud Instanz ablegt.

  • Gut, nun zum Restic Teil.

    In Debian Buster ist aktuell diese Version enthalten.

    restic/stable,now 0.9.4+ds-2+b1 amd64  [installiert]
      backup program with multiple revisions, encryption and more
    

    Installation

    apt install restic
    

    Version checken mit

    root@debian:~# restic version
    restic 0.9.4 compiled with go1.11.6 on linux/amd64
    

    INIT

    Um jetzt eine Datensicherung zu initialisieren, muss man folgendes eingeben.

    root@debian:~# restic -r rclone:nextcloud:HOME init
    enter password for new repository: 
    enter password again: 
    created restic repository 4bxxxxxx16 at rclone:nextcloud:HOME
    
    Please note that knowledge of your password is required to access
    the repository. Losing your password means that your data is
    irrecoverably lost.
    

    In diesem Beispiel erzeuge ich eine Datensicherung in der Nextcloud Instanz im Verzeichnis HOME.

    8b0322e0-0896-4167-8d25-6e341a61d461-image.png

    Man wird nach dem Passwort gefragt, alles so wie wir es kennen. Mehr zu Restic gibt es hier. Man könnte jetzt natürlich auch mehrere Datensicherungen dort ablegen, dazu müsste das HOME gegen was anderes ausgetauscht werden.

    Backup Plan

    Ich möchte die wichtigsten Daten aus meinem Homeverzeichnis sichern. Dazu müssen wir uns Gedanken machen, was wichtig ist.

    Ich habe da folgende Sachen mal ausgesucht

    • Scripte_NAS
    • .cinnamon
    • .config
    • .filezilla
    • .gnupg
    • .joplin
    • .mozilla
    • .ssh
    • .thunderbird
    • .vscode

    Nun erstellen wir eine INCLUDE Datei.

     nano includes.txt
    

    Die Dateien von oben rein und speichern.

    BACKUP

    Das sieht dann so aus.

    restic --password-file /root/passwd -r rclone:nextcloud:HOME backup --files-from /root/includes.txt
    

    In /root/passwd liegt das Passwort, wir wollen das Ganze ja bitte schön automatisieren.

    Der Rest sollte klar sein, ansonsten verweise ich auf die tolle Anleitung.

    Nun werden alle Dateien verschlüsselt in der Nextcloud Instanz abgelegt. So mit kann auch kein neugieriger Systemadministrator da was mit anfangen 😉

  • Hier mal eine Ausgabe vom ersten Durchgang

    root@frank-MS-7C37:~# restic --password-file /root/passwd -r rclone:Nextcloud:HOME_UBUNTU backup --files-from /root/includes.txt
    repository 99xxxxa0 opened successfully, password is correct
    created new cache in /root/.cache/restic
    rclone: 2020/05/08 17:47:57 ERROR : locks: error listing: directory not found
    rclone: 2020/05/08 17:47:58 ERROR : index: error listing: directory not found
    rclone: 2020/05/08 17:47:58 ERROR : snapshots: error listing: directory not found
    
    Files:        3503 new,     0 changed,     0 unmodified
    Dirs:            2 new,     0 changed,     0 unmodified
    Added to the repo: 16.872 GiB
    
    processed 3503 files, 21.134 GiB in 1:02:56
    snapshot fdxxxxec saved
    

    Der erste Durchgang hat also etwa eine Stunde benötigt. Durch die Deduplikation der Daten, ist der Vorgang beim zweiten Durchgang viel schneller weil nur neue oder geänderte Daten gesichert werden. Und außerdem sind alle Daten AES-256 verschlüsselt. Also perfekt zur Ablage in irgendeiner Cloud 😉

    root@frank-MS-7C37:~# restic --password-file /root/passwd -r rclone:Nextcloud:HOME_UBUNTU backup --files-from /root/includes.txt
    repository 99xxxxa0 opened successfully, password is correct
    
    Files:          57 new,    41 changed,  3449 unmodified
    Dirs:            0 new,     2 changed,     0 unmodified
    Added to the repo: 22.941 MiB
    
    processed 3547 files, 21.137 GiB in 0:13
    snapshot c6xxxxe4 saved
    

    Wie ihr seht, hat der zweite Durchgang nur ein paar neue und geänderte Daten gesichert. Der Rest ist ja schon vorhanden. Und das kann man dann auch problemlos täglich, wöchentlich oder was auch immer mal eben schnell durchführen.

    Eines meiner absoluten Lieblingstool 🙂

  • Redis ConnectionPool

    Redis
    2
    0 Stimmen
    2 Beiträge
    31 Aufrufe
    FrankMF

    Die Antwort von ChatGPT wie der Redis ConnectionPool funktioniert. Ein paar Dinge finde ich komisch.

    Link Preview Image ChatGPT

    ChatGPT is a free-to-use AI system. Use it for engaging conversations, gain insights, automate tasks, and witness the future of AI, all in one place.

    favicon

    (chat.openai.com)

  • 0 Stimmen
    1 Beiträge
    52 Aufrufe
    Niemand hat geantwortet
  • Nextcloud - Hub 5 (27.0.0)

    Nextcloud
    1
    0 Stimmen
    1 Beiträge
    81 Aufrufe
    Niemand hat geantwortet
  • Docker & Redis Datenbank

    Verschoben Linux
    2
    0 Stimmen
    2 Beiträge
    149 Aufrufe
    FrankMF

    @FrankM sagte in Docker & Redis Datenbank:

    save 60 1
    #save 900 1
    save 300 10
    save 60 10000

    Hier kann man auch noch schön sehen, wie ich gekämpft habe, bis ich mal eine dump.rdb gesehen habe. Auch irgendwie logisch, das ich nie eine gesehen hatte, wenn man weiß das

    save 900 1

    bedeutet, das er alle 900 Sekunden speichert, wenn mindestens eine Änderung vorhanden ist. Das kann dann schon was dauern. Ich habe das dann mal verkürzt, damit ich schneller ein Ergebnis habe.

    save 60 1

    Das brachte mich dann dem Ziel näher. Danach konnte ich die dump.rdb auch finden.

    Bitte keine Redis DB ohne Passwort laufen lassen!
  • Images 0.11.x

    Images
    5
    0 Stimmen
    5 Beiträge
    323 Aufrufe
    FrankMF

    0.11.2: gitlab-ci-linux-build-187 released

    0.11.2: Update OMV install (to also be able to run OMV6)
  • ClusterSSH

    Angeheftet Linux
    4
    0 Stimmen
    4 Beiträge
    707 Aufrufe
    FrankMF

    Mal wieder lange dran rumgefummelt, bis es passte.

    I have figured out how to use any font in xterm. So for the case of the mentioned Inconsolata font size 14, the following works:

    Add these 2 lines into ~/.Xresources (create it if it does not exist)

    XTermfaceName: Inconsolata
    XTermfaceSize: 14

    Then, tell xterm to use this file:

    export XENVIRONMENT="${HOME}/.Xresources"

    Preferably add this export into .bashrc, so that it is persistent.

    comment out the font settings in ~/.clusterssh/config, if it exists: # terminal_font=6x13

    Quelle: https://unix.stackexchange.com/questions/230106/cluster-ssh-specify-terminal-font

  • Linux Befehle - ls & tail

    Linux
    1
    0 Stimmen
    1 Beiträge
    326 Aufrufe
    Niemand hat geantwortet
  • NAS - Cups & Sane

    Linux
    1
    0 Stimmen
    1 Beiträge
    468 Aufrufe
    Niemand hat geantwortet