Skip to content

ROCKPro64 - Release 0.10.6 Was geht?

Angeheftet ROCKPro64
  • Wird laufend ergänzt.

    Hardware

    • ROCKPro64v2.1 mit 2GB RAM
    • Pine64 WiFi-Modul montiert
    • irgendeine SD-Karte 😉
    • PCIe NVMe SSD Samsung 970 EVO mit 500GB
    • PCIE SATA Adapter von Pine64

    Software

    Kernel/Images

    Release 0.10.6

    https://github.com/ayufan-rock64/linux-build/releases/
    

    Kernelversionen

    Kernel 5.6.0

    rock64@rockpro64:~$ uname -a
    Linux rockpro64 5.6.0-1127-ayufan-g1bd266cae93f #ayufan SMP PREEMPT Sat Apr 4 11:14:08 UTC 2020 aarch64 GNU/Linux
    

    linux-mainline-u-boot

    Quelle: https://github.com/ayufan-rock64/linux-mainline-u-boot/releases

    Das Image -> https://github.com/ayufan-rock64/linux-mainline-u-boot/releases/download/2020.01-ayufan-2008-g6a9e270f/u-boot-flash-spi-rockpro64.img.xz auf eine SD-Karte und dann den ROCKPro64 starten. Der u-boot wird nun in den SPI Speicher geladen.

    Danach sieht das beim Start so aus.

    U-Boot TPL 2020.01-ayufan-2008-g6a9e270f (Apr 06 2020 - 19:20:48)               
    Channel 0: LPDDR4, 50MHz                                                        
    BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB                         
    Channel 1: LPDDR4, 50MHz                                                        
    BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB                         
    256B stride                                                                     
    256B stride                                                                     
    lpddr4_set_rate: change freq to 400000000 mhz 0, 1                              
    lpddr4_set_rate: change freq to 800000000 mhz 1, 0                              
    Trying to boot from BOOTROM                                                     
    Returning to boot ROM...                                                        
                                                                                    
    U-Boot SPL 2020.01-ayufan-2008-g6a9e270f (Apr 06 2020 - 19:20:48 +0000)         
    Trying to boot from SPI                                                         
                                                                                    
                                                                                    
    U-Boot 2020.01-ayufan-2008-g6a9e270f (Apr 06 2020 - 19:20:53 +0000)             
                                                                                    
    Model: Pine64 RockPro64                                                         
    DRAM:  2 GiB                                                                    
    PMIC:  RK808                                                                    
    MMC:   dwmmc@fe320000: 1, sdhci@fe330000: 0                                     
    Loading Environment from MMC... Card did not respond to voltage select!         
    *** Warning - No block device, using default environment                        
                                                                                    
    In:    serial@ff1a0000                                                          
    Out:   serial@ff1a0000                                                          
    Err:   serial@ff1a0000                                                          
    Model: Pine64 RockPro64                                                         
    rockchip_dnl_key_pressed: adc_channel_single_shot fail!                         
    Net:   eth0: ethernet@fe300000                                                  
    Hit any key to stop autoboot:  0                                                
    Card did not respond to voltage select!                                         
    Card did not respond to voltage select!                                         
                                                                                    
    Device 0: Vendor: 0x144d Rev: 1B2QEXE7 Prod: S466NX0K606125A                    
                Type: Hard Disk                                                     
                Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)                  
    ... is now current device                                                       
    Scanning nvme 0:7...                                                            
    Found /boot/extlinux/extlinux.conf                                              
    Retrieving file: /boot/extlinux/extlinux.conf                                   
    1985 bytes read in 3 ms (645.5 KiB/s)                                           
    select kernel                                                                   
    1:      kernel-5.6.0-1127-ayufan-g1bd266cae93f                                  
    2:      kernel-5.6.0-1127-ayufan-g1bd266cae93f-memtest                          
    3:      kernel-4.4.197-1236-rockchip-ayufan-g30faab37e339                       
    4:      kernel-4.4.197-1236-rockchip-ayufan-g30faab37e339-memtest   
    

    Hier im Beispiel booten wir von einer PCIe NVMe SSD 🙂

    Funktionen

    Funktion 5.6.x Bemerkungen
    Boot
    Boot from SD-Card Ja
    Boot from eMMC Nein Bin mir nicht sicher, ob meine Karte noch ganz ist!?
    Boot from USB2 Ja u-boot im SPI
    Boot from USB3 Jein u-boot im SPI & nur mit aktivem USB-Hub *1 / Samsung T5 500GB bootet einwandfrei!
    Boot from PCIe SATA Ja u-boot im SPI *2 (Pine64 PCIe SATA Karte)
    Boot from PCIe NVMe Ja u-boot im SPI
    u-boot im SPI Ja
    Speed
    USB2 Schreibgeschwindigkeit = 34.4 MB/s
    USB3 Schreibgeschwindigkeit = 307 MB/s *3
    SATA Schreibgeschwindigkeit = 167 MB/s *3
    NVMe SSD Schreibgeschwindigkeit = 354 MB/s
    Netzwerk
    LAN Ja
    WLAN Nein
    HDMI
    u-boot über HDMI Ja seit Release 0.10.10 möglich
    Sound über HDMI Ja Kurzer Test mit Focal Mate
    Software
    Wireguard Ja seit 5.6.0 im Kernel eingebaut
    Sonstiges
    GPIO Ja https://forum.frank-mankel.org/topic/292/rockpro64-rp64-gpio
    PCIe LAN Ja https://forum.frank-mankel.org/topic/785/rockpro64-rtl8111-8168-8411-netzwerkkarte

    *1 Habe leider hier nur einen aktiven USB2-Hub rumliegen.
    *2 Die PCIe SATA Karte von Pine64 ist bei mir immer unstabil. Auch jetzt beim Testen schon wieder erlebt. Sucht hier im Forum nach Marvel, wenn ihr was braucht was funktioniert 😉 Die 88SE9230 bootet aktuell aber nicht!
    *3 Kingston SSD 30GB uralt, nix besonderes

    USB2 mit Kingston SSD 30GB

    root@rockpro64:~# dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
    4096+0 records in
    4096+0 records out
    4294967296 bytes (4.3 GB, 4.0 GiB) copied, 124.978 s, 34.4 MB/s
    
    root@rockpro64:~# iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 
    	Iozone: Performance Test of File I/O
    	        Version $Revision: 3.429 $
    		Compiled for 64 bit mode.
    		Build: linux 
    
    	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
    	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
    	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
    	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
    	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
    	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
    	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
    	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
    
    	Run began: Mon Apr  6 18:56:33 2020
    
    	Include fsync in write timing
    	O_DIRECT feature enabled
    	Auto Mode
    	File size set to 102400 kB
    	Record Size 4 kB
    	Record Size 16 kB
    	Record Size 512 kB
    	Record Size 1024 kB
    	Record Size 16384 kB
    	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Output is in kBytes/sec
    	Time Resolution = 0.000001 seconds.
    	Processor cache size set to 1024 kBytes.
    	Processor cache line size set to 32 bytes.
    	File stride size set to 17 * record size.
                                                                  random    random     bkwd    record    stride                                    
                  kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
              102400       4     7952     7745     7996     8000     7998     7660                                                          
              102400      16    16155    20921    21304    21320    21326    21010                                                          
              102400     512    34122    26508    33639    33697    33793    26150                                                          
              102400    1024    16978    34238    34985    35009    35098    30017                                                          
              102400   16384    26710    34861    36627    36660    36543    30424                                                          
    
    iozone test complete.
    

    USB3 mit Kingston SSD 30GB (Laufwerk nur gemounted!)

    root@rockpro64:/tmp/home/rock64# iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Iozone: Performance Test of File I/O
    	        Version $Revision: 3.429 $
    		Compiled for 64 bit mode.
    		Build: linux 
    
    	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
    	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
    	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
    	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
    	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
    	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
    	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
    	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
    
    	Run began: Thu Apr  9 08:01:33 2020
    
    	Include fsync in write timing
    	O_DIRECT feature enabled
    	Auto Mode
    	File size set to 102400 kB
    	Record Size 4 kB
    	Record Size 16 kB
    	Record Size 512 kB
    	Record Size 1024 kB
    	Record Size 16384 kB
    	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Output is in kBytes/sec
    	Time Resolution = 0.000001 seconds.
    	Processor cache size set to 1024 kBytes.
    	Processor cache line size set to 32 bytes.
    	File stride size set to 17 * record size.
                                                                  random    random     bkwd    record    stride                                    
                  kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
              102400       4    26061    35535    42889    42971    21850    35713                                                          
              102400      16    84063    86028   129290   129826    51154    66566                                                          
              102400     512    51462    93092   321867   325285   267330    94610                                                          
              102400    1024    95373    66168   358059   354237   319789    94383                                                          
              102400   16384    96119    95686   402054   407651   401759    95431                                                          
    
    iozone test complete.
    
    root@rockpro64:/tmp/home/rock64# dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
    4096+0 records in
    4096+0 records out
    4294967296 bytes (4.3 GB, 4.0 GiB) copied, 14.0123 s, 307 MB/s
    

    SATA mit Kingston SSD 30GB

    rock64@rockpro64:~$ su -
    Password: 
    root@rockpro64:~# dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
    4096+0 records in
    4096+0 records out
    4294967296 bytes (4.3 GB, 4.0 GiB) copied, 25.7568 s, 167 MB/s
    
    root@rockpro64:~# iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 
    	Iozone: Performance Test of File I/O
    	        Version $Revision: 3.429 $
    		Compiled for 64 bit mode.
    		Build: linux 
    
    	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
    	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
    	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
    	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
    	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
    	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
    	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
    	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
    
    	Run began: Mon Apr  6 17:22:20 2020
    
    	Include fsync in write timing
    	O_DIRECT feature enabled
    	Auto Mode
    	File size set to 102400 kB
    	Record Size 4 kB
    	Record Size 16 kB
    	Record Size 512 kB
    	Record Size 1024 kB
    	Record Size 16384 kB
    	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Output is in kBytes/sec
    	Time Resolution = 0.000001 seconds.
    	Processor cache size set to 1024 kBytes.
    	Processor cache line size set to 32 bytes.
    	File stride size set to 17 * record size.
                                                                  random    random     bkwd    record    stride                                    
                  kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
              102400       4    47864    57015    60763    65378    24102    57241                                                          
              102400      16    62813    63284   123363   124019    48474    68212                                                          
              102400     512    93443    64391   183898   185367   164868    93919                                                          
              102400    1024    80409    59245   186095   187240   176284    79986                                                          
              102400   16384    91769    64891   198105   198678   197379    91380                                                          
    
    iozone test complete.
    

    PCIe NVMe SSD Samsung 970 EVO mit 500GB

    root@rockpro64:~# dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
    4096+0 records in
    4096+0 records out
    4294967296 bytes (4.3 GB, 4.0 GiB) copied, 12.1257 s, 354 MB/s
    
    root@rockpro64:~# iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 
    	Iozone: Performance Test of File I/O
    	        Version $Revision: 3.429 $
    		Compiled for 64 bit mode.
    		Build: linux 
    
    	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
    	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
    	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
    	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
    	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
    	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
    	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
    	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
    
    	Run began: Tue Apr  7 14:43:51 2020
    
    	Include fsync in write timing
    	O_DIRECT feature enabled
    	Auto Mode
    	File size set to 102400 kB
    	Record Size 4 kB
    	Record Size 16 kB
    	Record Size 512 kB
    	Record Size 1024 kB
    	Record Size 16384 kB
    	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Output is in kBytes/sec
    	Time Resolution = 0.000001 seconds.
    	Processor cache size set to 1024 kBytes.
    	Processor cache line size set to 32 bytes.
    	File stride size set to 17 * record size.
                                                                  random    random     bkwd    record    stride                                    
                  kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
              102400       4    93687   141412   152744   153793    60207   107762                                                          
              102400      16   205156   290381   286336   288328   179783   286977                                                          
              102400     512   694803   715674   638949   651216   630293   716284                                                          
              102400    1024   721862   734861   650364   655548   651639   731992                                                          
              102400   16384   817110   813895   763116   780517   780152   812026                                                          
    
    iozone test complete.
    

    Samsung T5 500GB / Boot von USB3 / U-Boot im SPI

    root@rockpro64:~# dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync,notrunc
    4096+0 records in
    4096+0 records out
    4294967296 bytes (4.3 GB, 4.0 GiB) copied, 10.2325 s, 420 MB/s
    
    root@rockpro64:~# iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Iozone: Performance Test of File I/O
    	        Version $Revision: 3.429 $
    		Compiled for 64 bit mode.
    		Build: linux 
    
    	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
    	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
    	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
    	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
    	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
    	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
    	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
    	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
    
    	Run began: Sun Apr 26 12:27:46 2020
    
    	Include fsync in write timing
    	O_DIRECT feature enabled
    	Auto Mode
    	File size set to 102400 kB
    	Record Size 4 kB
    	Record Size 16 kB
    	Record Size 512 kB
    	Record Size 1024 kB
    	Record Size 16384 kB
    	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Output is in kBytes/sec
    	Time Resolution = 0.000001 seconds.
    	Processor cache size set to 1024 kBytes.
    	Processor cache line size set to 32 bytes.
    	File stride size set to 17 * record size.
                                                                  random    random     bkwd    record    stride                                    
                  kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
              102400       4    39473    43553    43429    43407    28844    43979                                                          
              102400      16    99125   110086   139237   140321    88984   107029                                                          
              102400     512   351532   348307   284313   312907   298748   345134                                                          
              102400    1024   376448   375621   349070   351109   342185   373018                                                          
              102400   16384   420922   421686   406547   408913   408091   421238                                                          
    
    iozone test complete.
    

  • ROCKPro64 - Netflix?

    ROCKPro64
    2
    0 Stimmen
    2 Beiträge
    395 Aufrufe
    FrankMF

    Anleitung von Kamil

    # Netflix Starting with 0.8.0rc13 it is possible to use Netflix on all **Ubuntu/armf** desktop images using regular Chromium browser. Due to Google policies images do not ship Widevine CDM required by Netflix to decrypt videos. Currently, Widevine CDM is only available for **armhf** and **Ubuntu**. You have to install Widevine CDM with: ```bash install_widevine_drm.sh ``` This will take between 5 to 15 mins depending on the performance of SD-card, and your Internet connection.
  • 0 Stimmen
    1 Beiträge
    1k Aufrufe
    Niemand hat geantwortet
  • Benchmark Script

    ROCKPro64
    2
    0 Stimmen
    2 Beiträge
    578 Aufrufe
    FrankMF
    Mainline

    Mein gekürztes Ergebnis auf einem ROCKPro64 v2.0 mit 4GB RAM und 4.18er Kernel, dieser ROCK benutzt eine SD-Karte!

    Gekürzt

    Distributor ID: Ubuntu Description: Ubuntu 18.04.1 LTS Release: 18.04 Codename: bionic Architecture: arm64 Uptime: 16:14:56 up 4 min, 1 user, load average: 0.08, 0.02, 0.01 Linux 4.18.0-rc5-1048-ayufan-g69e417fe38cf (rockpro64) 07/27/18 _aarch64_ (6 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 0.54 0.00 0.74 0.39 0.00 98.33 Device tps kB_read/s kB_wrtn/s kB_read kB_wrtn mmcblk0 20.63 634.58 48.26 168380 12804 nvme0n1 0.14 4.01 0.00 1064 0 total used free shared buff/cache available Mem: 3.8G 241M 3.4G 19M 201M 3.5G Swap: 0B 0B 0B ##########################################################################

    Komplett -> http://ix.io/1ix7

  • Image 0.7.8 - Latest release

    ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    536 Aufrufe
    Niemand hat geantwortet
  • ROCKPro64 - kein WLan-Modul möglich?

    ROCKPro64
    4
    0 Stimmen
    4 Beiträge
    2k Aufrufe
    FrankMF

    Heute, 5 Monate später, kann ich bestätigen das WLan möglich ist 🙂 Getestet auf einem ROCKPro64 v2.1 mit 2GB RAM.

    Eine Vorabversion von Recalbox machte es das erste Mal für mich möglich das WLan zu benutzen. Bericht

    Und PCIe ist abgeschaltet im dts File.

    pcie-phy { compatible = "rockchip,rk3399-pcie-phy"; #phy-cells = <0x0>; rockchip,grf = <0x15>; clocks = <0x8 0x8a>; clock-names = "refclk"; resets = <0x8 0x87>; reset-names = "phy"; status = "disabled"; phandle = <0x8b>; }; pcie@f8000000 { compatible = "rockchip,rk3399-pcie"; #address-cells = <0x3>; #size-cells = <0x2>; aspm-no-l0s; clocks = <0x8 0xc5 0x8 0xc4 0x8 0x147 0x8 0xa0>; clock-names = "aclk", "aclk-perf", "hclk", "pm"; bus-range = <0x0 0x1f>; max-link-speed = <0x2>; linux,pci-domain = <0x0>; msi-map = <0x0 0x89 0x0 0x1000>; interrupts = <0x0 0x31 0x4 0x0 0x0 0x32 0x4 0x0 0x0 0x33 0x4 0x0>; interrupt-names = "sys", "legacy", "client"; #interrupt-cells = <0x1>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 0x8a 0x0 0x0 0x0 0x0 0x2 0x8a 0x1 0x0 0x0 0x0 0x3 0x8a 0x2 0x0 0x0 0x0 0x4 0x8a 0x3>; phys = <0x8b>; phy-names = "pcie-phy"; ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; reg = <0x0 0xf8000000 0x0 0x2000000 0x0 0xfd000000 0x0 0x1000000>; reg-names = "axi-base", "apb-base"; resets = <0x8 0x82 0x8 0x83 0x8 0x84 0x8 0x85 0x8 0x86 0x8 0x81 0x8 0x80>; reset-names = "core", "mgmt", "mgmt-sticky", "pipe", "pm", "pclk", "aclk"; status = "disabled";

    Also bleibt weiterhin ungeklärt, ob auch beides zusammen möglich ist. Also gleichzeitig das WLan-Modul und eine PCIe Karte.

  • Release Empfehlung für Einsteiger

    Verschoben Archiv
    2
    0 Stimmen
    2 Beiträge
    1k Aufrufe
    FrankMF

    Sieht so aus, als wenn wir ein neues Traumpaar haben. 🙂

    0.7.7

    und

    rock64@rockpro64:/mnt$ uname -a Linux rockpro64 4.18.0-rc3-1046-ayufan-ge76778b6aa4b #1 SMP PREEMPT Thu Jul 19 14:10:17 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux
  • ROCKPro64 - Wo stehen wir?

    ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    580 Aufrufe
    Niemand hat geantwortet
  • 0 Stimmen
    5 Beiträge
    2k Aufrufe
    FrankMF

    Ich sehe gerade, das könnte hier auch mal neu gemacht werden.