Skip to content

Images 0.10.x

Angeheftet Images
  • 0.10.2: gitlab-ci-linux-build-170 released

    HIGHLY EXPERIMENTAL AND NOT WORKING!!!
    THIS RELEASE HAS BROKEN BOOT

    Quelle: https://github.com/ayufan-rock64/linux-build/releases/

    Nein, man kann noch nichts nutzen! 🙂

  • 0.10.3: gitlab-ci-linux-build-171 released

    • HIGHLY EXPERIMENTAL AND NOT WORKING!!!

    • PRE-RELEASE: unstable and should be only used for testing purposes

      • 0.10.3: Hopefully OMV will compile,
      • 0.10.3: ADd SPI boot on RockPro64
      • 0.10.3: Add NVME/SATA boot on RockPro64
      • 0.10.2: Update partition scheme to use /boot/efi, /boot and /
      • 0.10.2: Configure /etc/fstab with all partitions
      • 0.10.2: Compile buster/containers instead of focal/containers

    Das sollte jetzt auch auf einigen Geräten booten. Aber heute wird nichts mehr getestet - Feierabend! 🙂

  • 0.10.6: gitlab-ci-linux-build-174 released

    • 0.10.6: Maybe build OMV5
    • 0.10.6: Use u-boot instead of u-boot-rockchip
    • 0.10.6: Fix focal/armhf build
    • 0.10.5: Revert systemd-networkd change
    • 0.10.5: Maybe support USB3 boot on Rock64
    • 0.10.5: Maybe build OMV5
  • 0.10.7: gitlab-ci-linux-build-175 released

    • 0.10.7: Maybe Pinebook Pro will work, thanks Manjaro 🙂
    • 0.10.7: Maybe Desktop will boot
    • 0.10.7: Maybe OMV5 will run
    • 0.10.7: Maybe gl4es will work
  • 0.10.7 ist im Moment nicht funktional. Nach dem Boot ist keine eth0 Schnittstelle vorhanden.

  • 0.10.8: gitlab-ci-linux-build-177 released

    • 0.10.8: Make rootfs sticky
    • 0.10.8: Update sizes of images
    • 0.10.8: Enable by default C.UTF-8 and en_US.UTF-8 and use dpkg-reconfigure locales
    • 0.10.8: Run update-command-not-found
    • 0.10.8: Better handle /etc/resolv.conf (do not remove it, if it become system controlled)
    • 0.10.8: Load dptx.alt.bin to make it possible to ship also on buster

    Viele neue Images

    • Ubuntu Focal LXDE
    • Ubuntu Focal Mate
    • Ubuntu Focal Minimum
    • Debian Buster OMV

    Viele Sachen zum Testen 🙂

  • 0.10.9 - 0.10.9: gitlab-ci-linux-build-180 released

    • 0.10.9: Shrink created images to reduce write time
    • 0.10.9: Enable work/diy LEDs on boot for RockPro64/PinebookPro
    • 0.10.9: Fix excessive log messages on OMV5
    • 0.10.8: Make rootfs sticky
    • 0.10.8: Update sizes of images
  • 0.10.10: gitlab-ci-linux-build-181 released

    • 0.10.10: Do not compile OMV5 for armhf, only arm64
    • 0.10.10: Fix fstab issue introduced in 0.10.9
    • 0.10.10: Do more cleanups during image creation to reduce size
    • 0.10.10: Enable u-boot HDMI output for RockPro64
    • 0.10.10: Support HDMI modeline with pclck 32MHz (ie. 1024x600@43)
    • 0.10.10: Support automated resize when booting from nvme
  • 0.10.11: gitlab-ci-linux-build-183 released

    • 0.10.11: Support wifi/bt on Pinebook Pro
    • 0.10.11: Add install_kernel script
    • 0.10.11: Fix support for rockchip/dptx.bin
    • 0.10.11: Try Gnome, KDE, XFCE4 additionally to LXDE, Mate

    Neue Desktops werden auf Basis von Ubuntu Focal unterstützt.

    • KDE
    • XFCE4
    • Gnome

    Mal gespannt, was davon rund läuft 😉 Kann leider jetzt nichts testen, meine Testmaschine ist mit einem Raid Resync beschäftigt. OK, dann die Tage..

  • 0.10.12: gitlab-ci-linux-build-184 released

    • 0.10.12: Be strict on any qemu failures
    • 0.10.12: Build by default mate/lxde/gnome/xfce4
    • 0.10.12: Add pcie scan delay from @nuumio
    • 0.10.12: Add ubuntu-mate-lightdm-theme where possible

    Ich komme gar nicht mehr mit dem Testen hinterher 🙂

  • Buster & Disco Images in Arbeit

    Images
    3
    0 Stimmen
    3 Beiträge
    330 Aufrufe
    FrankMF

    Das passiert gerade, Images aber wohl noch nicht fertig.

    0.9.3: Update kernel branch to 4.4.185, 0.9.3: Disable OMV5 for now, 0.9.2: Fix linux-package release due to fpm being broken, 0.9.1: Build OMV5 (Debian/Buster), 0.9.1: Fix ppas for Debian/Buster and Ubuntu/Disco,
  • Lakka Image

    Images
    2
    0 Stimmen
    2 Beiträge
    820 Aufrufe
    FrankMF

    Lakka 2.2 Christmas Release

    lakka.png

    Quelle: http://www.lakka.tv/articles/2018/12/24/lakka-22-christmas-release/

  • Eure Meinung zum ROCKPro64 ?

    ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    570 Aufrufe
    Niemand hat geantwortet
  • Benchmark Script

    ROCKPro64
    2
    0 Stimmen
    2 Beiträge
    578 Aufrufe
    FrankMF
    Mainline

    Mein gekürztes Ergebnis auf einem ROCKPro64 v2.0 mit 4GB RAM und 4.18er Kernel, dieser ROCK benutzt eine SD-Karte!

    Gekürzt

    Distributor ID: Ubuntu Description: Ubuntu 18.04.1 LTS Release: 18.04 Codename: bionic Architecture: arm64 Uptime: 16:14:56 up 4 min, 1 user, load average: 0.08, 0.02, 0.01 Linux 4.18.0-rc5-1048-ayufan-g69e417fe38cf (rockpro64) 07/27/18 _aarch64_ (6 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 0.54 0.00 0.74 0.39 0.00 98.33 Device tps kB_read/s kB_wrtn/s kB_read kB_wrtn mmcblk0 20.63 634.58 48.26 168380 12804 nvme0n1 0.14 4.01 0.00 1064 0 total used free shared buff/cache available Mem: 3.8G 241M 3.4G 19M 201M 3.5G Swap: 0B 0B 0B ##########################################################################

    Komplett -> http://ix.io/1ix7

  • NAS/Server/Desktop Gehäuse

    Hardware
    6
    0 Stimmen
    6 Beiträge
    2k Aufrufe
    FrankMF

    Nettes Video

  • stretch-openmediavault-rockpro64

    Verschoben Linux
    1
    0 Stimmen
    1 Beiträge
    792 Aufrufe
    Niemand hat geantwortet
  • Schaltpläne veröffentlicht!

    ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    963 Aufrufe
    Niemand hat geantwortet
  • Interessante Links

    ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    618 Aufrufe
    Niemand hat geantwortet