Skip to content

Quartz64 - Model B

Angeheftet Verschoben Quartz64 - B
  • Quartz64_model_b.png
    Bildquelle: https://www.pine64.org/quartz64b/

    5V-Stromversorgung!

    SoC and Memory Specification

    CPU Architecture

    • Quad-core ARM Cortex-A55@1.8GHz
    • AArch32 for full backwards compatibility with ARMv7
    • ARM Neon Advanced SIMD (single instruction, multiple data) support for accelerated media and signal processing computation
    • Includes VFP hardware to support single and double-precision operations
    • ARMv8 Cryptography Extensions
    • Integrated 32KB L1 instruction cache and 32KB L1 data cache per core
    • 512KB unified system L3 cache
    • TrustZone technology support

    Graphic Process Unit GPU Capability

    • Mali-G52 2EE Bifrost GPU@800MHz
    • 4x Multi-Sampling Anti-Aliasing (MSAA) with minimal performance drop
    • 128KB L2 Cache configurations
    • Supports OpenGL ES 1.1, 2.0, and 3.2
    • Supports Vulkan 1.0 and 1.1
    • Supports OpenCL 2.0 Full Profile
    • Supports 1600 Mpix/s fill rate when at 800MHz clock frequency
    • Supports 38.4 GLOP/s when at 800MHz clock frequency

    Neural Process Unit NPU Capability

    • Neural network acceleration engine with processing performance of up to 0.8 TOPS
    • Supports integer 8 and integer 16 convolution operations
    • Supports the following deep learning frameworks: TensorFlow, TF-lite, Pytorch, Caffe, ONNX, MXNet, Keras, Darknet

    System Memory

    • RAM Memory Variants: 2GB - 8GB LPDDR4.
    • SPI Flash: 128Mbit / 16MByte

    Network

    • 10/100/1000Mbps Ethernet
    • WiFi 802.11 b/g/n/ac with Bluetooth 5.0 (optional on model A, build in on model B)

    Storage

    • microSD - bootable, supports SDHC and SDXC, storage up to 2TB
    • USB - 2 ports on model B, 3 ports on model A USB 2.0 Host port, 1 USB 3.0 Host port
    • one native SATA 3.0 6Gb/s Port (only on model A, shared with USB 3.0 host port)
    • optional eMMC module from 16GB up to 128GB

    Expansion Ports

    • eDP - 4 lanes of 2.7Gbps, up to 2560x1600@60Hz (only on model A)
    • DSI - Display Serial Interface, 4 lanes MiPi, up to 1440P on model A, 2 lanes MiPi, up to 1080p on model B
    • CSI - CMOS Camera Interface, 4 lanes MiPi up to 8 mega pixel on model A, 2 lanes MiPi up to 5 mega pixel on model B
    • TP - Touch Panel Port, SPI with interrupt on model A
    • RTC - Real Time Clock Battery Connector
    • VBAT - Lithium Battery Connector with temperature sensor input on model A
    • Wifi/BT Module Header - SDIO 3.0 and UART on model A, build in Wifi/BT Module on model B
    • 2x20 pins "Pi2" GPIO Header on model B, 2x10 pins GPO header on model A
    • PCIe x4 open ended slot on model A, m.2 slot on model B, one Gen2 lane due to SoC constraints

    Quartz64 board Information, Schematics, and Certifications

    Quelle: https://wiki.pine64.org/wiki/Quartz64

  • Neuigkeiten zum WiFi-Modul, was auf dem Model B verbaut ist.

    <@tl_lim> The Quartz64 model B product version will comes with BL602 module instead of AP6255.

    Das macht nur 2,4 GHz 😞

    Dokumentation

  • FrankMF FrankM hat am auf dieses Thema verwiesen
  • FrankMF FrankM hat dieses Thema am angepinnt
  • Da mein Model B ja bestellt ist, bin ich gerade über einen Post gestolpert.

    <CounterPillow> "Model A" is the big form factor, "Model B" the small form factor. Model A boards generally use 12V, Model B boards use 5V.

    Da sollte man also höllisch aufpassen, wenn man beide auf dem Schreibtisch liegen hat. Da ist schnell mal ein B gegrillt, wenn man das falsche Netzteil erwischt.

    Blödsinn! Beim Quartz64 - Modell A ist der Stecker

    DC 12V @ 3A 5.5mmOD/2.1mmID center-positive Barrel DC Jack connector

    beim Quartz64 - Modell B

    DC 5V @ 3A 3.5mmOD/1.35mmID center-positive Barrel DC Jack connector

    Passt also nicht, also alles safe 🙂

    Der Schaltplan soll nächste Woche veröffentlicht werden.

    CounterPillow hat mal nachgemessen

    <CounterPillow> just checked with with multimeter, it is center positive

  • Da schreibt mich das Sales Team von pine64.org an teilt mir mit, das meine PLZ falsch ist. Ja, ein scheiß Tippfehler....... Er wäre schon da 😞

  • Das ging diesmal flott. Nachricht von FedEx, Lieferung soll bis zum 02.06 da sein 🤓

  • Er ist angekommen.

    20210625_163934.jpg

    1024-2272.jpg

    Leider funktioniert der UART Adapter nicht, jede Menge Artefakte 😞

    Ein paar Neue sind bestellt und hoffentlich morgen da. Das alte Spielkind, konnte es aber nicht lassen und musste unbedingt schauen ob der M2-Slot funktioniert.

    1024-227245.jpg

    Bildschirmfoto vom 2022-06-01 19-04-26.png

    Ok, das macht natürlich NULL Spaß, also geht es morgen weiter...

  • FrankMF FrankM verschob dieses Thema von Hardware am
  • Heute die Zollrechnung von FedEx 16,47€

  • Quartz64 - Modell B - Stromverbrauch

    Quartz64 - B
    1
    0 Stimmen
    1 Beiträge
    104 Aufrufe
    Niemand hat geantwortet
  • Quartz64 - Modell B - eMMC

    Quartz64 - B
    1
    0 Stimmen
    1 Beiträge
    134 Aufrufe
    Niemand hat geantwortet
  • Quartz64 - Modell B - WiFi

    Quartz64 - B
    1
    0 Stimmen
    1 Beiträge
    160 Aufrufe
    Niemand hat geantwortet
  • Quartz64 - Modell B - Manjaro Image

    Images
    6
    0 Stimmen
    6 Beiträge
    151 Aufrufe
    FrankMF

    Heute kam dann der Kernel 5.19

    [root@frank-pc ~]# uname -a Linux frank-pc 5.19.0-rc1-0.2-MANJARO-ARM-Q64 #1 SMP PREEMPT Fri Jun 10 14:51:37 UTC 2022 aarch64 GNU/Linux

    am Anfang war es Version 5.19.0-rc1-0.1, aber was das? Keine Tastatur mehr? Häh.... Es ging nur noch der obere USB2 Port. Na gut, man weiß sich ja zu helfen, also einen USB Switch dran gehangen, alles wieder gut. Aber blöd ist das schon!? Außerdem war Sound über HDMI weg.

    So, warum? Ich nutze hier den Kernel

    linux-quartz64

    der wird im Manjaro Buildsystem direkt vom Peter gezogen. Und Peter arbeitet ja so, das er alles zum Mainline-Kernel hochladen kann usw.

    Der Audio Patch ist aber upstream noch nicht akzeptiert und für USB2 gibt es einen Patch, der wohl USB OTG aktivieren soll.

    USB2

    So in Peters dtb war die USB2 Schnittstelle auf OTG konfiguriert. Das macht aus irgendeinem Grund Ärger, ich habe das dann im dtb auf HOST umgestellt, danach war alles wieder wie vorher 🙂

    Schaut mal auf die Unterseite des B und ihr werdet folgendes finden.

    usb2_host.jpeg

    Fragt mich nicht, wozu man das braucht. Im Moment habe ich keine Ahnung. Steht bei mir aktuell auf HOST.

    Audio über HDMI

    Blöd, das das jetzt auf einmal nicht mehr geht. Dan hat dann ein paar Patche losgelassen, so das nun wieder Audio über HDMI funktioniert. So Desktop Betriebssysteme ohne Sound sind blöd - oder? 😉

    PCIe NVMe SSD

    Meine PCIe NVMe SSD funktionierte ja nicht, wenn man große Datenmengen kopierte crashte der Controller. Peter hat das gefixt, das ist seit 5.19 jetzt funktional. Und direkt als Root eingebunden.

    [root@frank-pc ~]# df -h Dateisystem Größe Benutzt Verf. Verw% Eingehängt auf dev 1,7G 0 1,7G 0% /dev run 1,9G 1,3M 1,9G 1% /run /dev/nvme0n1p1 458G 11G 424G 3% / tmpfs 1,9G 0 1,9G 0% /dev/shm tmpfs 1,9G 220K 1,9G 1% /tmp /dev/mmcblk0p1 458M 42M 417M 9% /boot tmpfs 374M 48K 374M 1% /run/user/1000 /dev/mmcblk0p2 59G 3,7G 52G 7% /run/media/frank/ROOT_MNJRO /dev/sda1 458G 11G 424G 3% /run/media/frank/777684c9-e74f-44b9-b491-694daafb9723

    Somit haben wir seit Kernel 5.19 PCIe NVMe SSD Unterstützung Yeah

    Und seit Kernel 5.19.0-rc1-0.2 geht auch wieder Audio über HDMI.

    Danke Dan für die Patches! Und Danke an den feinen Patch für PCIe NVMe an Peter!
  • 0 Stimmen
    2 Beiträge
    96 Aufrufe
    FrankMF
    Was geht? Funktion Status Bemerkung cpufreq ok *3 UART ja *5 LAN hat Fehler *1 USB3 ja ca. 210MB/s *2 PCIe ja ca. 296 MB/s, ist mit einer Lane angeschlossen *4 HDMI nein LAN *1 root@debian:~# iperf3 -c 192.168.3.213 Connecting to host 192.168.3.213, port 5201 [ 5] local 192.168.3.10 port 39124 connected to 192.168.3.213 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 434 KBytes 3.55 Mbits/sec 61 2.83 KBytes [ 5] 1.00-2.00 sec 475 KBytes 3.89 Mbits/sec 44 2.83 KBytes [ 5] 2.00-3.00 sec 396 KBytes 3.24 Mbits/sec 43 2.83 KBytes [ 5] 3.00-4.00 sec 318 KBytes 2.61 Mbits/sec 40 2.83 KBytes [ 5] 4.00-5.00 sec 315 KBytes 2.58 Mbits/sec 31 2.83 KBytes [ 5] 5.00-6.00 sec 396 KBytes 3.24 Mbits/sec 46 2.83 KBytes [ 5] 6.00-7.00 sec 396 KBytes 3.24 Mbits/sec 43 2.83 KBytes [ 5] 7.00-8.00 sec 396 KBytes 3.24 Mbits/sec 43 1.41 KBytes [ 5] 8.00-9.00 sec 396 KBytes 3.24 Mbits/sec 47 2.83 KBytes [ 5] 9.00-10.00 sec 317 KBytes 2.59 Mbits/sec 39 2.83 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 3.75 MBytes 3.14 Mbits/sec 437 sender [ 5] 0.00-10.00 sec 3.67 MBytes 3.08 Mbits/sec receiver iperf Done. root@debian:~# iperf3 -R -c 192.168.3.213 Connecting to host 192.168.3.213, port 5201 Reverse mode, remote host 192.168.3.213 is sending [ 5] local 192.168.3.10 port 39130 connected to 192.168.3.213 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 112 MBytes 941 Mbits/sec [ 5] 1.00-2.00 sec 112 MBytes 942 Mbits/sec [ 5] 2.00-3.00 sec 112 MBytes 942 Mbits/sec [ 5] 3.00-4.00 sec 112 MBytes 942 Mbits/sec [ 5] 4.00-5.00 sec 112 MBytes 942 Mbits/sec [ 5] 5.00-6.00 sec 112 MBytes 942 Mbits/sec [ 5] 6.00-7.00 sec 112 MBytes 942 Mbits/sec [ 5] 7.00-8.00 sec 112 MBytes 942 Mbits/sec [ 5] 8.00-9.00 sec 112 MBytes 942 Mbits/sec [ 5] 9.00-10.00 sec 112 MBytes 942 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.10 GBytes 943 Mbits/sec 370 sender [ 5] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec receiver iperf Done. USB3 *2 root@debian:~# lsusb Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. JMS578 SATA 6Gb/s Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Disk /dev/sda: 238.47 GiB, 256060514304 bytes, 500118192 sectors Disk model: Generic Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 05AB264B-738E-47BB-9F67-5C04CC24A736 Device Start End Sectors Size Type /dev/sda1 2048 500118158 500116111 238.5G Linux filesystem root@debian:~# mount /dev/sda1 /mnt/sda/ root@debian:~# cd /mnt/sda root@debian:/mnt/sda# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 81.5051 s, 211 MB/s -------------- root@debian:/# lsusb Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 003: ID 04e8:61f5 Samsung Electronics Co., Ltd Portable SSD T5 Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@debian:/mnt/sda# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 83.7618 s, 205 MB/s cpufreq *3 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_max_freq 1800000 1800000 1800000 1800000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1416000 1416000 1416000 1416000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1800000 1800000 1800000 1800000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1416000 1416000 1416000 1416000 PCIe NVMe SSD *4 root@debian:/mnt/nvme# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 58.0362 s, 296 MB/s

    Das soll laut Peter die maximal mögliche Geschwindigkeit der PCIe Schnittstelle sein. Diese Schnittstelle ist nur mit einer Lane an den Prozessor angeschlossen!

    UART

    Bitte drauf achten, diese Schnittstelle arbeitet mit Level Shifting, was billige Adapter oft nicht abkönnen. Habe ich hier im Beitrag ausführlich erklärt, mit passenden Adapter, wenn es so wie bei mir nicht funktionierte.

  • Quartz64 - Modell B - M.2 Anschluss

    Quartz64 - B
    3
    0 Stimmen
    3 Beiträge
    205 Aufrufe
    FrankMF

    Ich hatte schon drauf getippt, das der Slot nur mit einer Lane angeschlossen ist.

    <pgwipeout> It is a single lane pcie2 port.

    Und damit ist das das erwartete Ergebnis

    root@debian:/mnt/nvme# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 58.4993 s, 294 MB/s

    Das alles mit Debian 10, was man mit Peters Buildsystem installieren kann. Kann man aber auch bei Bedarf auf 11.3 hochziehen 🙂

    root@debian:/etc# uname -a Linux debian 5.17.0 #1 SMP PREEMPT Thu Apr 7 13:38:56 UTC 2022 aarch64 GNU/Linux root@debian:/etc# cat debian_version 11.3 root@debian:/etc#
  • Quartz64 - Modell B - UART

    Angeheftet Quartz64 - B
    4
    0 Stimmen
    4 Beiträge
    163 Aufrufe
    FrankMF

    Um das hier zu komplettieren, habe ich mich gerade gefragt "Wo speichert er die Settings?"

    Ok, ich habe sie gefunden.

    /root/.minirc.dfl

    Inhalt

    # Diese Datei ist maschinell erzeugt. Bitte verwenden Sie das # Einstellungs-Menü im minicom-Programm, um die Einstellungen # zu ändern. pu rtscts No

    Jetzt habe ich ausreichend hier dokumentiert, falls ich da nochmal Probleme mit habe.

  • Quartz64 - Wireguard

    Verschoben Quartz64
    1
    0 Stimmen
    1 Beiträge
    223 Aufrufe
    Niemand hat geantwortet