Skip to content

Quartz64 - UART

Angeheftet Verschoben Quartz64 - A
  • Ich übernehme keine Garantie für Hardwareschäden! Beim Spielen bitte aufpassen 😉

    Was wir so mit als erstes brauchen ist natürlich die UART Schnittstelle. Das Diagramm zeigt folgendes.

    c45059e6-645c-4937-89fd-8ad64782d3d4-grafik.png
    Quelle: https://files.pine64.org/doc/quartz64/Quartz64_model-A_schematic_v1.0_20201124.pdf

    So wie gewohnt 🙂

    Die UART Schnittstelle ist 3,3V

    Pin Funktion
    6 GND
    8 UART2 TX
    10 UART2 RX

    Ergänzung, vom ROCKPro64 Beitrag kopiert.

    minicom

    Ein apt search minicom ergibt folgendes.

    putty/stable,stable 0.70-6 amd64
      Telnet/SSH client for X
    

    Installation mit

    apt install minicom
    

    Einstellungen

    minicom_desktop.png

    Das hier sind die Einstellungen meines Desktop Starters. Man kann das auch einfach über eine Konsole starten.

    minicom -8 -D /dev/ttyUSB0 -b 1500000\n
    

    Ausgabe

    minicom_konsole.png

    minicom_konsole2.png

  • FrankMF FrankM hat dieses Thema am angepinnt
  • Mein Quartz64 ist heute eingetroffen, mit einem Test Image des Manjaro Teams mal ausprobiert. Die UART-Schnittstelle funktioniert genau wie beim ROCKPro64. Also, nichts Neues für uns. UART Adapter anschließen und los geht es.

  • FrankMF FrankM verschob dieses Thema von Hardware am

  • Quartz64 - Modell B - Stromverbrauch

    Quartz64 - B
    1
    0 Stimmen
    1 Beiträge
    104 Aufrufe
    Niemand hat geantwortet
  • Quartz64 - Modell B - Temperaturen

    Quartz64 - B
    1
    0 Stimmen
    1 Beiträge
    94 Aufrufe
    Niemand hat geantwortet
  • 0 Stimmen
    2 Beiträge
    96 Aufrufe
    FrankMF
    Was geht? Funktion Status Bemerkung cpufreq ok *3 UART ja *5 LAN hat Fehler *1 USB3 ja ca. 210MB/s *2 PCIe ja ca. 296 MB/s, ist mit einer Lane angeschlossen *4 HDMI nein LAN *1 root@debian:~# iperf3 -c 192.168.3.213 Connecting to host 192.168.3.213, port 5201 [ 5] local 192.168.3.10 port 39124 connected to 192.168.3.213 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 434 KBytes 3.55 Mbits/sec 61 2.83 KBytes [ 5] 1.00-2.00 sec 475 KBytes 3.89 Mbits/sec 44 2.83 KBytes [ 5] 2.00-3.00 sec 396 KBytes 3.24 Mbits/sec 43 2.83 KBytes [ 5] 3.00-4.00 sec 318 KBytes 2.61 Mbits/sec 40 2.83 KBytes [ 5] 4.00-5.00 sec 315 KBytes 2.58 Mbits/sec 31 2.83 KBytes [ 5] 5.00-6.00 sec 396 KBytes 3.24 Mbits/sec 46 2.83 KBytes [ 5] 6.00-7.00 sec 396 KBytes 3.24 Mbits/sec 43 2.83 KBytes [ 5] 7.00-8.00 sec 396 KBytes 3.24 Mbits/sec 43 1.41 KBytes [ 5] 8.00-9.00 sec 396 KBytes 3.24 Mbits/sec 47 2.83 KBytes [ 5] 9.00-10.00 sec 317 KBytes 2.59 Mbits/sec 39 2.83 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 3.75 MBytes 3.14 Mbits/sec 437 sender [ 5] 0.00-10.00 sec 3.67 MBytes 3.08 Mbits/sec receiver iperf Done. root@debian:~# iperf3 -R -c 192.168.3.213 Connecting to host 192.168.3.213, port 5201 Reverse mode, remote host 192.168.3.213 is sending [ 5] local 192.168.3.10 port 39130 connected to 192.168.3.213 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 112 MBytes 941 Mbits/sec [ 5] 1.00-2.00 sec 112 MBytes 942 Mbits/sec [ 5] 2.00-3.00 sec 112 MBytes 942 Mbits/sec [ 5] 3.00-4.00 sec 112 MBytes 942 Mbits/sec [ 5] 4.00-5.00 sec 112 MBytes 942 Mbits/sec [ 5] 5.00-6.00 sec 112 MBytes 942 Mbits/sec [ 5] 6.00-7.00 sec 112 MBytes 942 Mbits/sec [ 5] 7.00-8.00 sec 112 MBytes 942 Mbits/sec [ 5] 8.00-9.00 sec 112 MBytes 942 Mbits/sec [ 5] 9.00-10.00 sec 112 MBytes 942 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.10 GBytes 943 Mbits/sec 370 sender [ 5] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec receiver iperf Done. USB3 *2 root@debian:~# lsusb Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. JMS578 SATA 6Gb/s Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Disk /dev/sda: 238.47 GiB, 256060514304 bytes, 500118192 sectors Disk model: Generic Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 05AB264B-738E-47BB-9F67-5C04CC24A736 Device Start End Sectors Size Type /dev/sda1 2048 500118158 500116111 238.5G Linux filesystem root@debian:~# mount /dev/sda1 /mnt/sda/ root@debian:~# cd /mnt/sda root@debian:/mnt/sda# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 81.5051 s, 211 MB/s -------------- root@debian:/# lsusb Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 003: ID 04e8:61f5 Samsung Electronics Co., Ltd Portable SSD T5 Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@debian:/mnt/sda# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 83.7618 s, 205 MB/s cpufreq *3 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_max_freq 1800000 1800000 1800000 1800000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1416000 1416000 1416000 1416000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1800000 1800000 1800000 1800000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1416000 1416000 1416000 1416000 PCIe NVMe SSD *4 root@debian:/mnt/nvme# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 58.0362 s, 296 MB/s

    Das soll laut Peter die maximal mögliche Geschwindigkeit der PCIe Schnittstelle sein. Diese Schnittstelle ist nur mit einer Lane an den Prozessor angeschlossen!

    UART

    Bitte drauf achten, diese Schnittstelle arbeitet mit Level Shifting, was billige Adapter oft nicht abkönnen. Habe ich hier im Beitrag ausführlich erklärt, mit passenden Adapter, wenn es so wie bei mir nicht funktionierte.

  • Quartz64 Model B im Shop bestellbar

    Verschoben Quartz64
    1
    0 Stimmen
    1 Beiträge
    341 Aufrufe
    Niemand hat geantwortet
  • Quartz64 - dts File bearbeiten

    Angeheftet Verschoben Quartz64
    3
    0 Stimmen
    3 Beiträge
    264 Aufrufe
    FrankMF

    Ich weiß nicht, wonach ich gesucht habe, vermutlich nach

    apt install device-tree-compiler

    das gibt es im Manjaro Image nicht, es heißt ganz einfach dtc 😎 Also, ganz einfach mit

    pacman -S dtc

    installieren. Dann kann man sich diesen Umweg mit snapd sparen.

  • Quartz64 - SPI

    Verschoben Quartz64 - A
    2
    0 Stimmen
    2 Beiträge
    168 Aufrufe
    FrankMF

    Bitte unbedingt beachten!

    https://forum.frank-mankel.org/topic/1042/quartz64-missing-spi

  • Quartz64 - Model B

    Angeheftet Verschoben Quartz64 - B
    10
    0 Stimmen
    10 Beiträge
    745 Aufrufe
    FrankMF

    Heute die Zollrechnung von FedEx 16,47€

  • Quartz64

    Verschoben Quartz64
    3
    0 Stimmen
    3 Beiträge
    476 Aufrufe
    FrankMF

    Es gibt Neuigkeiten!

    We are currently planning on making Quartz64 available next month. However, given the unpredictability of the manufacturing situation, please consider this a tentative time-frame. Once the production is underway, I’ll publish a dedicated post with additional information and an exact availability date.

    Although the hardware will soon see the light of day, the software is still not ready for primetime. Indeed, despite a truly monumental effort from various parties and lightning fast development progress, Quartz64 is still in early stages of development. This is understandable given how young the SoC is and how few Quartz64 (and other RK3566 boards) are currently available to developers. We will therefore target this initial production-run at developers and technically inclined enthusiasts able to help in the bring-up process. The soon-to-be scheduled batch will be large enough to cover all developers interested in picking up a unit (and then some), but end-users will specifically be asked to wait a little longer. After all, it is in everyone’s best interest that these early boards end up in the right hands at this early stage of development.

    Quelle: https://www.pine64.org/2021/05/15/may-update-connection-established/