linux-nerds.org

Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

VSCodium - Nach Umzug die Entwicklungsumgebung wieder aktivieren

Linux

1 Beiträge 1 Kommentatoren 160 Aufrufe

FrankM

schrieb am

Nach dem Umzug auf Linux Mint Cinnamon geht mein VSCodium nicht mehr (erwartet). Ok dann mal wieder startbereitet machen. Nach dem Start befinde ich mich in einer virtuellen Entwicklungsumgebung (aus Datensicherung), die funktionieren aber nie. Bin kein Experte, den Grund kenne ich nicht. Ok, machen wir eine neue..
Wir deaktivieren sie...

deactivate

Wir sichern das env Verzeichnis

mv venv/ /home/frank/venv

Wir erstellen eine neue Umgebung

python3 -m venv venv

Wir aktivieren diese Umgebung

source venv/bin/activate

Danach installieren wir die benötigten Module

(venv) frank@frank-MS-7C37:~/restic-ui-public$ pip3 install PyQt5
Collecting PyQt5
  Using cached PyQt5-5.15.4-cp36.cp37.cp38.cp39-abi3-manylinux2014_x86_64.whl (8.3 MB)
Collecting PyQt5-Qt5>=5.15
  Using cached PyQt5_Qt5-5.15.2-py3-none-manylinux2014_x86_64.whl (59.9 MB)
Collecting PyQt5-sip<13,>=12.8
  Using cached PyQt5_sip-12.9.0-cp38-cp38-manylinux1_x86_64.whl (332 kB)
Installing collected packages: PyQt5-Qt5, PyQt5-sip, PyQt5
Successfully installed PyQt5-5.15.4 PyQt5-Qt5-5.15.2 PyQt5-sip-12.9.0
(venv) frank@frank-MS-7C37:~/restic-ui-public$ pip3 install requests
Collecting requests
  Using cached requests-2.25.1-py2.py3-none-any.whl (61 kB)
Collecting idna<3,>=2.5
  Using cached idna-2.10-py2.py3-none-any.whl (58 kB)
Collecting chardet<5,>=3.0.2
  Using cached chardet-4.0.0-py2.py3-none-any.whl (178 kB)
Collecting urllib3<1.27,>=1.21.1
  Using cached urllib3-1.26.6-py2.py3-none-any.whl (138 kB)
Collecting certifi>=2017.4.17
  Using cached certifi-2021.5.30-py2.py3-none-any.whl (145 kB)
Installing collected packages: idna, chardet, urllib3, certifi, requests
Successfully installed certifi-2021.5.30 chardet-4.0.0 idna-2.10 requests-2.25.1 urllib3-1.26.6

Läuft wieder

F

Redis ändert das Lizenz Modell
Geplant Angeheftet Gesperrt Verschoben Redis redis linux
2

0 Stimmen

2 Beiträge

55 Aufrufe

F

Ein Artikel von Heise zum Thema

Link Preview Image Datenbankanbieter Redis ändert sein Lizenzmodell – erneut
Die No-SQL-Datenbank wird künftig nach einem dualen Modell lizenziert: Redis Source Available License Version 2 oder Server-Side Public License Version 1.
favicon
Developer (www.heise.de)
F

Pycharm - Nach Stromausfall startet es nicht mehr.
Geplant Angeheftet Gesperrt Verschoben Linux pycharm linux
1

0 Stimmen

1 Beiträge

80 Aufrufe

Niemand hat geantwortet
F

Test - Nach einigen Änderungen
Geplant Angeheftet Gesperrt Verschoben Linux
1

0 Stimmen

1 Beiträge

37 Aufrufe

Niemand hat geantwortet
F

Redis - Datenbanken löschen
Geplant Angeheftet Gesperrt Verschoben Redis redis linux
1

0 Stimmen

1 Beiträge

135 Aufrufe

Niemand hat geantwortet
F

ZFS-Pool - Do not use (sda & sdb) to create a pool!
Geplant Angeheftet Gesperrt Verschoben Linux zfs proxmox
2

0 Stimmen

2 Beiträge

240 Aufrufe

F

Hier kurz vor dem Abschluss der Spiegelung.

d54abd23-aa52-482d-b9e1-52ece09106ec-grafik.png

Und alles wieder gut und eine Menge gelernt 🤓

594b6283-bbbe-4cec-8401-d57cce52012b-grafik.png
F

Mainline 5.11.x
Geplant Angeheftet Gesperrt Verschoben Images linux rockpro64
1

0 Stimmen

1 Beiträge

220 Aufrufe

Niemand hat geantwortet
S

FAN control OMV Auyfan 0.10.12: gitlab-ci-linux-build-184, Kernel 5.6
Geplant Angeheftet Gesperrt Verschoben Linux linux
12

1 Stimmen

12 Beiträge

907 Aufrufe

M

Hi,

since I'm currently change my rockpro64 setup I came across this.

With the kernel from ayufan you need to set PWM_CTL to
/sys/devices/platform/pwm-fan/hwmon/hwmon3/pwm1
for my self compiled one I need
/sys/devices/platform/pwm-fan/hwmon/hwmon0/pwm1
But I got it only working with one entry for PWM_CTL e.g.
PWM_CTL = "/sys/devices/platform/pwm-fan/hwmon/hwmon0/pwm1",
after that you need to start ats again
sudo systemctl stop ats sudo systemctl start ats
initially the fan should start immediately for a short period of time.

In case it is even a different one on your kernel you can find the right one using this command.
sudo find /sys -name pwm1 | grep hwmon
So far I'm not sure which kernel parameter or modul changes this.

Martin
F

Liste von Linuxbefehlen
Geplant Angeheftet Gesperrt Verschoben Linux linux
3

0 Stimmen

3 Beiträge

637 Aufrufe

F

systemd Anzeige der geladenen Dienste root@host:/etc/systemd/system# systemctl --type=service UNIT LOAD ACTIVE SUB DESCRIPTION atd.service loaded active running Deferred execution scheduler blk-availability.service loaded active exited Availability of block devices cloud-config.service loaded active exited Apply the settings specified in cloud-config cloud-final.service loaded active exited Execute cloud user/final scripts cloud-init-local.service loaded active exited Initial cloud-init job (pre-networking) cloud-init.service loaded active exited Initial cloud-init job (metadata service crawler) console-setup.service loaded active exited Set console font and keymap cron.service loaded active running Regular background program processing daemon crowdsec-firewall-bouncer.service loaded active running The firewall bouncer for CrowdSec crowdsec.service loaded active running Crowdsec agent dbus.service loaded active running D-Bus System Message Bus getty@tty1.service loaded active running Getty on tty1 ifupdown-pre.service loaded active exited Helper to synchronize boot up for ifupdown keyboard-setup.service loaded active exited Set the console keyboard layout kmod-static-nodes.service loaded active exited Create List of Static Device Nodes lvm2-monitor.service loaded active exited Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling mariadb.service loaded active running MariaDB 10.11.3 database server networking.service loaded active exited Raise network interfaces nginx.service loaded active running A high performance web server and a reverse proxy server qemu-guest-agent.service loaded active running QEMU Guest Agent resolvconf.service loaded active exited Nameserver information manager semaphore.service loaded active running Ansible Semaphore serial-getty@ttyS0.service loaded active running Serial Getty on ttyS0 ssh.service loaded active running OpenBSD Secure Shell server systemd-binfmt.service loaded active exited Set Up Additional Binary Formats systemd-fsck@dev-disk-by\x2duuid-1E22\x2dDC00.service loaded active exited File System Check on /dev/disk/by-uuid/1E22-DC00 systemd-journal-flush.service loaded active exited Flush Journal to Persistent Storage systemd-journald.service loaded active running Journal Service systemd-logind.service loaded active running User Login Management systemd-modules-load.service loaded active exited Load Kernel Modules systemd-random-seed.service loaded active exited Load/Save Random Seed systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems systemd-sysctl.service loaded active exited Apply Kernel Variables systemd-sysusers.service loaded active exited Create System Users systemd-timesyncd.service loaded active running Network Time Synchronization systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories systemd-udev-trigger.service loaded active exited Coldplug All udev Devices systemd-udevd.service loaded active running Rule-based Manager for Device Events and Files systemd-update-utmp.service loaded active exited Record System Boot/Shutdown in UTMP systemd-user-sessions.service loaded active exited Permit User Sessions ufw.service loaded active exited Uncomplicated firewall user-runtime-dir@0.service loaded active exited User Runtime Directory /run/user/0 user@0.service loaded active running User Manager for UID 0 LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 44 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'.