Skip to content

Quartz64 - Kühler

Moved Quartz64 - A
  • Im Moment aktuell noch überhaupt nicht nötig aber wollte es trotzdem hier mal vorstellen.

    20210722_101305.jpg

    Auf dieses Board und auch genauso auf den ROCKPro64 passen ganz normale NorthBridge Kühler. Hier bei diesem Modell könnte man noch einen Lüfter drauf schrauben. Da ich keine Lüfter mag, mein NAS auf ROCKPro64 Basis hat auch nur einen Kühlkörper drauf, kommt da auch nie einer drauf.

  • @frankm

    the ram chip is higher as the cpu 😉

  • @thc013 I use an thermal pad. So i think it isn't an problem.

  • FrankMF FrankM verschob dieses Thema von Hardware am
  • FrankMF FrankM verschob dieses Thema von Quartz64 - A am
  • FrankMF FrankM verschob dieses Thema von Quartz64 am

  • 0 Votes
    4 Posts
    163 Views
    FrankMF

    Um das hier zu komplettieren, habe ich mich gerade gefragt "Wo speichert er die Settings?"

    Ok, ich habe sie gefunden.

    /root/.minirc.dfl

    Inhalt

    # Diese Datei ist maschinell erzeugt. Bitte verwenden Sie das # Einstellungs-Menü im minicom-Programm, um die Einstellungen # zu ändern. pu rtscts No

    Jetzt habe ich ausreichend hier dokumentiert, falls ich da nochmal Probleme mit habe.

  • Quartz64 - Model A

    Pinned Moved Quartz64 - A
    3
    0 Votes
    3 Posts
    429 Views
    FrankMF

    Bitte unbedingt beachten!

    https://forum.frank-mankel.org/topic/1042/quartz64-missing-spi

  • 0 Votes
    7 Posts
    681 Views
    FrankMF

    Hallo @mabs,

    ja. Der uboot wird in den SPI Speicher geladen. Der sucht dann beim Starten nach einem bootfähigem Device. So wie auf einem ganz normalen PC. Eine richtig coole Sache, wo ich mich freue, das das langsam mal funktioniert.

    Die Performance wird ja dann sicherlich von dem Device bestimmt. Dazu gibt es ja genug Messungen. Ich würde eine NVMe SSD immer einer SATA Platte vorziehen. Es kommt aber auf den Anwendungsfall an.

    Für ein NAS dann eher zwei oder mehr SATA Platten, und von USB3 HDD booten 🙂 So wie ich das schon lange betreibe.

    Aber, da hat auch jeder andere Vorstellungen und Vorlieben für.

  • 0 Votes
    1 Posts
    420 Views
    No one has replied
  • ROCKPro64 - i2c Bus

    Hardware
    1
    0 Votes
    1 Posts
    512 Views
    No one has replied
  • Freier Linux GPU Treiber

    ROCKPro64
    1
    0 Votes
    1 Posts
    492 Views
    No one has replied
  • 0 Votes
    3 Posts
    1k Views
    FrankMF

    Um einen neuen Kernel booten zu können, brauche ich diese 4 Dateien unter /boot

    config-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 initrd.img-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 System.map-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 vmlinuz-4.19.0-rc4-1065-ayufan-g72e04c7b3e06

    Und den Ordner /boot/dtbs/4.19.0-rc4-1065-ayufan-g72e04c7b3e06 mit folgendem Inhalt

    rock64@rockpro64v2_0:/boot/dtbs/4.19.0-rc4-1065-ayufan-g72e04c7b3e06$ ls -la total 104 drwxr-xr-x 26 root root 4096 Sep 30 09:54 . drwxr-xr-x 6 root root 4096 Sep 30 09:55 .. drwxr-xr-x 2 root root 4096 Sep 30 09:54 al drwxr-xr-x 2 root root 4096 Sep 30 09:54 allwinner drwxr-xr-x 2 root root 4096 Sep 30 09:54 altera drwxr-xr-x 2 root root 4096 Sep 30 09:54 amd drwxr-xr-x 2 root root 4096 Sep 30 09:54 amlogic drwxr-xr-x 2 root root 4096 Sep 30 09:54 apm drwxr-xr-x 2 root root 4096 Sep 30 09:54 arm drwxr-xr-x 4 root root 4096 Sep 30 09:54 broadcom drwxr-xr-x 2 root root 4096 Sep 30 09:54 cavium drwxr-xr-x 2 root root 4096 Sep 30 09:54 exynos drwxr-xr-x 2 root root 4096 Sep 30 09:54 freescale drwxr-xr-x 2 root root 4096 Sep 30 09:54 hisilicon drwxr-xr-x 2 root root 4096 Sep 30 09:54 lg drwxr-xr-x 2 root root 4096 Sep 30 09:54 marvell drwxr-xr-x 2 root root 4096 Sep 30 09:54 mediatek drwxr-xr-x 2 root root 4096 Sep 30 09:54 nvidia drwxr-xr-x 2 root root 4096 Sep 30 09:54 qcom drwxr-xr-x 2 root root 4096 Sep 30 09:54 renesas drwxr-xr-x 2 root root 4096 Sep 30 09:54 rockchip drwxr-xr-x 2 root root 4096 Sep 30 09:54 socionext drwxr-xr-x 2 root root 4096 Sep 30 09:54 sprd drwxr-xr-x 2 root root 4096 Sep 30 09:54 synaptics drwxr-xr-x 2 root root 4096 Sep 30 09:54 xilinx drwxr-xr-x 2 root root 4096 Sep 30 09:54 zte

    Unter /boot/extlinux liegt dann die Datei extlinux.conf

    Die sieht bei mir dann so aus

    timeout 10 menu title select kernel label kernel-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 kernel /boot/vmlinuz-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 initrd /boot/initrd.img-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 devicetreedir /boot/dtbs/4.19.0-rc4-1065-ayufan-g72e04c7b3e06 append rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=${ethaddr} eth1addr=${eth1addr} serial=${serial#} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=TEST rootwait rootfstype=ext4 label kernel-4.19.0-rc4-1065-ayufan-g72e04c7b3e06-memtest kernel /boot/vmlinuz-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 initrd /boot/initrd.img-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 devicetreedir /boot/dtbs/4.19.0-rc4-1065-ayufan-g72e04c7b3e06 append rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=${ethaddr} eth1addr=${eth1addr} serial=${serial#} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=TEST rootwait rootfstype=ext4 memtest

    Darunter kommen dann evt. die alten Kernel die installiert waren, das habe ich hier im Beispiel weg gelassen.

  • 0 Votes
    5 Posts
    2k Views
    FrankMF

    Ich sehe gerade, das könnte hier auch mal neu gemacht werden.