Skip to content

Python3 - PyQt6 installieren

Python3
  • Immer wenn ich versuche PyQt6 zu installieren, bekomme ich merkwürdige Fehlermeldungen.

    frank@frank-MS-7C37:~/qsettings$ pipenv install PyQt6
    Installing PyQt6…
    Looking in indexes: https://pypi.python.org/simple
    Collecting PyQt6
      Using cached PyQt6-6.2.2-cp36-abi3-manylinux1_x86_64.whl (7.7 MB)
    
    Error:  An error occurred while installing PyQt6!
    ERROR: Could not find a version that satisfies the requirement PyQt6-Qt6>=6.2.2 (from PyQt6) (from versions: none)
    ERROR: No matching distribution found for PyQt6-Qt6>=6.2.2 (from PyQt6)
    

    Sauber läuft das nur, wenn das Paket pip aktuell ist. Also hier mal eine Vorgehensweise, wie man das sauber installiert.

    env Umgebung bauen

    pipenv --python 3.8
    

    Danach, die Umgebung starten

    frank@frank-MS-7C37:~/qsettings$ pipenv shell
    Spawning environment shell (/bin/bash). Use 'exit' to leave.
    

    pip aktualisieren

    (qsettings-kBmIZW-V) frank@frank-MS-7C37:~/qsettings$ python -m pip install -U pip
    Collecting pip
      Using cached pip-21.3.1-py3-none-any.whl (1.7 MB)
    Installing collected packages: pip
      Attempting uninstall: pip
        Found existing installation: pip 20.0.2
        Uninstalling pip-20.0.2:
          Successfully uninstalled pip-20.0.2
    Successfully installed pip-21.3.1
    

    PyQt6 installieren

    (qsettings-kBmIZW-V) frank@frank-MS-7C37:~/qsettings$ pipenv install PyQt6
    Installing PyQt6…
    Looking in indexes: https://pypi.python.org/simple
    Collecting PyQt6
      Using cached PyQt6-6.2.2-cp36-abi3-manylinux1_x86_64.whl (7.7 MB)
    Collecting PyQt6-sip<14,>=13.2
      Using cached PyQt6_sip-13.2.0-cp38-cp38-manylinux1_x86_64.whl (310 kB)
    Collecting PyQt6-Qt6>=6.2.2
      Using cached PyQt6_Qt6-6.2.2-py3-none-manylinux_2_28_x86_64.whl (50.0 MB)
    Installing collected packages: PyQt6-sip, PyQt6-Qt6, PyQt6
    Successfully installed PyQt6-6.2.2 PyQt6-Qt6-6.2.2 PyQt6-sip-13.2.0
    
    Adding PyQt6 to Pipfile's [packages]…
    Pipfile.lock not found, creating…
    Locking [dev-packages] dependencies…
    Locking [packages] dependencies…
    Updated Pipfile.lock (7f928c)!
    Installing dependencies from Pipfile.lock (7f928c)…
      🐍   ▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉ 3/3 — 00:00:00
    

    Danach meckert auch nicht mehr, wenn ich ein PyQt6 Modul importieren möchte

    from PyQt6.QtCore import QSettings
    
  • FrankMF FrankM hat am auf dieses Thema verwiesen

  • 0 Stimmen
    1 Beiträge
    53 Aufrufe
    Niemand hat geantwortet
  • Python - Formatumwandlung str -> float

    Python3
    1
    0 Stimmen
    1 Beiträge
    138 Aufrufe
    Niemand hat geantwortet
  • Python - Frameworks

    Python3
    2
    0 Stimmen
    2 Beiträge
    76 Aufrufe
    FrankMF

    Und mal hier parken

  • Python - Match-Case Statement

    Python3
    1
    0 Stimmen
    1 Beiträge
    82 Aufrufe
    Niemand hat geantwortet
  • Python3 - enumerate()

    Python3
    2
    0 Stimmen
    2 Beiträge
    88 Aufrufe
    FrankMF

    Ich habe noch was Code gefunden, den ich mal dringend aufräumen musste 🙂 Wenn ich mit dem Restic UI die Snapshots anzeige, dann sieht das so aus.

    reading repository password from stdin ID Time Host Tags Paths ---------------------------------------------------------------------------- 4e769748 2021-12-31 21:48:34 frank-MS-7C37 /home/frank/Bilder 34298934 2022-01-26 20:15:53 frank-MS-7C37 /home/frank/Bilder 0d5d88f2 2022-01-27 21:05:07 frank-MS-7C37 /home/frank/Bilder f0e7d5a7 2022-01-29 13:46:12 frank-MS-7C37 /home/frank/Bilder 79918d70 2022-01-29 13:52:56 frank-MS-7C37 /home/frank/Bilder d74272a3 2022-01-30 11:54:20 frank-MS-7C37 /home/frank/Bilder 11b0b5ad 2022-01-30 11:57:44 frank-MS-7C37 /home/frank/Bilder 4a7450d2 2022-02-20 09:35:56 frank-MS-7C37 /home/frank/Bilder c1a4a51d 2022-02-20 09:36:43 frank-MS-7C37 /home/frank/Bilder d178ded5 2022-02-20 09:38:53 frank-MS-7C37 /home/frank/Bilder 997e2259 2022-02-20 16:35:57 frank-MS-7C37 /home/frank/Bilder 3320ad5c 2022-02-20 16:49:19 frank-MS-7C37 /home/frank/Bilder ---------------------------------------------------------------------------- 12 snapshots

    Mich interessieren die IDs, weil ich bei der Eingabe der IDs überprüfen möchte, ob die eingegebene ID existiert. Also muss ich das irgendwie auslesen und speichern. Das habe ich bis jetzt so gemacht.

    def id_append(self, result): # We split the result into individual lines. # Result was passed. And create an list. result_list = result.split('\n') # We count the number of repositories and search for 'source'. count = result.count(backup_data[row].source) # Offset added, first interesting line is line 3! count = count + 3 # We loop through the list and output the ID's and store in snapshot_id x = 3 while x < count: a = result_list[x] y = a[0:8] snapshot_id.append(y) x = x + 1

    Das erschien mir heute, beim erneuten Betrachten, Spaghetticode zu sein. Machen wir das mal etwas ordentlicher.

    Ich nehme die Ausgabe (stdout) und erzeuge eine Liste, jede Zeile ein Element.

    result_list = result.split('\n')

    Sieht so aus

    ['reading repository password from stdin', 'ID Time Host Tags Paths', '----------------------------------------------------------------------------', '4e769748 2021-12-31 21:48:34 frank-MS-7C37 /home/frank/Bilder', '34298934 2022-01-26 20:15:53 frank-MS-7C37 /home/frank/Bilder', '0d5d88f2 2022-01-27 21:05:07 frank-MS-7C37 /home/frank/Bilder', 'f0e7d5a7 2022-01-29 13:46:12 frank-MS-7C37 /home/frank/Bilder', '79918d70 2022-01-29 13:52:56 frank-MS-7C37 /home/frank/Bilder', 'd74272a3 2022-01-30 11:54:20 frank-MS-7C37 /home/frank/Bilder', '11b0b5ad 2022-01-30 11:57:44 frank-MS-7C37 /home/frank/Bilder', '4a7450d2 2022-02-20 09:35:56 frank-MS-7C37 /home/frank/Bilder', 'c1a4a51d 2022-02-20 09:36:43 frank-MS-7C37 /home/frank/Bilder', 'd178ded5 2022-02-20 09:38:53 frank-MS-7C37 /home/frank/Bilder', '997e2259 2022-02-20 16:35:57 frank-MS-7C37 /home/frank/Bilder', '3320ad5c 2022-02-20 16:49:19 frank-MS-7C37 /home/frank/Bilder', '----------------------------------------------------------------------------', '12 snapshots', '']

    Diesmal benutzen wir die enumerate() Funktion

    for count, value in enumerate(result_list): print(count, value)

    Das was raus kommt, sieht so aus

    0 reading repository password from stdin 1 ID Time Host Tags Paths 2 ---------------------------------------------------------------------------- 3 4e769748 2021-12-31 21:48:34 frank-MS-7C37 /home/frank/Bilder 4 34298934 2022-01-26 20:15:53 frank-MS-7C37 /home/frank/Bilder 5 0d5d88f2 2022-01-27 21:05:07 frank-MS-7C37 /home/frank/Bilder 6 f0e7d5a7 2022-01-29 13:46:12 frank-MS-7C37 /home/frank/Bilder 7 79918d70 2022-01-29 13:52:56 frank-MS-7C37 /home/frank/Bilder 8 d74272a3 2022-01-30 11:54:20 frank-MS-7C37 /home/frank/Bilder 9 11b0b5ad 2022-01-30 11:57:44 frank-MS-7C37 /home/frank/Bilder 10 4a7450d2 2022-02-20 09:35:56 frank-MS-7C37 /home/frank/Bilder 11 c1a4a51d 2022-02-20 09:36:43 frank-MS-7C37 /home/frank/Bilder 12 d178ded5 2022-02-20 09:38:53 frank-MS-7C37 /home/frank/Bilder 13 997e2259 2022-02-20 16:35:57 frank-MS-7C37 /home/frank/Bilder 14 3320ad5c 2022-02-20 16:49:19 frank-MS-7C37 /home/frank/Bilder 15 ---------------------------------------------------------------------------- 16 12 snapshots 17

    Mich interessieren nur die Zeilen mit /home/frank/Bilder Das kann man so abfragen

    if backup_data[row].source in value:

    Und jetzt nur die ID entsprechend abspeichern

    snapshot_id.append(value[0:8])

    Sieht jetzt komplett so aus

    result_list = result.split('\n') for count, value in enumerate(result_list): if backup_data[row].source in value: snapshot_id.append(value[0:8]) print(count, value[0:8])

    Somit speichert er jetzt nur noch die IDs, der folgenden Ausgabe.

    3 4e769748 4 34298934 5 0d5d88f2 6 f0e7d5a7 7 79918d70 8 d74272a3 9 11b0b5ad 10 4a7450d2 11 c1a4a51d 12 d178ded5 13 997e2259 14 3320ad5c

    Diese IDs, kann ich dann weiterverarbeiten.

  • PyQt6 - QRegularExpressionValidator

    Python3
    1
    0 Stimmen
    1 Beiträge
    359 Aufrufe
    Niemand hat geantwortet
  • Python3 - virtuelle Entwicklungsumgebung

    Angeheftet Python3
    3
    0 Stimmen
    3 Beiträge
    301 Aufrufe
    FrankMF

    Nach Systemwechsel erneut Probleme. Hier noch mal aufgelistet.

    Aufpassen, das kein venv Ordner vorhanden ist! Neu anlegen!

    python3 -m venv venv

    Dann meckert mein Linux Mint Cinnamon

    The virtual environment was not created successfully because ensurepip is not available. On Debian/Ubuntu systems, you need to install the python3-venv package using the following command. apt install python3.8-venv You may need to use sudo with that command. After installing the python3-venv package, recreate your virtual environment. Failing command: ['/home/frank/Restic_UI_Produktiv/restic-ui-public/venv/bin/python3', '-Im', 'ensurepip', '--upgrade', '--default-pip']

    Ok, das ist einfach 😉

    apt install python3.8-venv python3 -m venv venv

    Danach aktivieren

    source venv/bin/activate Installation von PyQt5 (venv) frank@frank-MS-7C37:~/Restic_UI_Produktiv/restic-ui-public$ pip3 install PyQt5 Collecting PyQt5 Downloading PyQt5-5.15.4-cp36.cp37.cp38.cp39-abi3-manylinux2014_x86_64.whl (8.3 MB) |████████████████████████████████| 8.3 MB 1.7 MB/s Collecting PyQt5-Qt5>=5.15 Downloading PyQt5_Qt5-5.15.2-py3-none-manylinux2014_x86_64.whl (59.9 MB) |████████████████████████████████| 59.9 MB 18.3 MB/s Collecting PyQt5-sip<13,>=12.8 Downloading PyQt5_sip-12.9.0-cp38-cp38-manylinux1_x86_64.whl (332 kB) |████████████████████████████████| 332 kB 46.1 MB/s Installing collected packages: PyQt5-Qt5, PyQt5-sip, PyQt5 Successfully installed PyQt5-5.15.4 PyQt5-Qt5-5.15.2 PyQt5-sip-12.9.0

    Danach meckert er über ein fehlendes Modul requests

    (venv) frank@frank-MS-7C37:~/Restic_UI_Produktiv/restic-ui-public$ python3 restic_ui.py Traceback (most recent call last): File "restic_ui.py", line 41, in <module> from functions import ( File "/home/frank/Restic_UI_Produktiv/restic-ui-public/functions.py", line 19, in <module> import requests as req ModuleNotFoundError: No module named 'requests' Installation requests (venv) frank@frank-MS-7C37:~/Restic_UI_Produktiv/restic-ui-public$ pip3 install requests Collecting requests Downloading requests-2.25.1-py2.py3-none-any.whl (61 kB) |████████████████████████████████| 61 kB 802 kB/s Collecting chardet<5,>=3.0.2 Downloading chardet-4.0.0-py2.py3-none-any.whl (178 kB) |████████████████████████████████| 178 kB 2.7 MB/s Collecting certifi>=2017.4.17 Downloading certifi-2021.5.30-py2.py3-none-any.whl (145 kB) |████████████████████████████████| 145 kB 14.0 MB/s Collecting idna<3,>=2.5 Downloading idna-2.10-py2.py3-none-any.whl (58 kB) |████████████████████████████████| 58 kB 9.4 MB/s Collecting urllib3<1.27,>=1.21.1 Downloading urllib3-1.26.6-py2.py3-none-any.whl (138 kB) |████████████████████████████████| 138 kB 11.5 MB/s Installing collected packages: chardet, certifi, idna, urllib3, requests Successfully installed certifi-2021.5.30 chardet-4.0.0 idna-2.10 requests-2.25.1 urllib3-1.26.6

    Und schwupps, geht mein Tool wieder 🙂

    4968ce42-7c66-4c8a-a2ad-424b9a529d87-grafik.png

  • Python3 - JSON

    Python3
    3
    0 Stimmen
    3 Beiträge
    188 Aufrufe
    FrankMF

    ede1a88a-5183-4f85-a602-27650362d532-grafik.png

    Die Backups sollen Namen haben, also habe ich das erweitert. Jetzt sollen diese als Liste rechts angezeigt werden. Das mache ich wie folgt.

    for key in backups: print(backups[key]['name'], key) liste = backups[key]['name'] + " ID: " + key self.listWidget.addItem(liste)

    Mittels des Keys kann ich auf den Namen zugreifen und die Liste damit füllen. Aktuell habe ich noch den Key hinten angefügt, weil ich noch keine Idee habe, wie ich die Backups anders verarbeiten soll. Aber, Stück für Stück. Der Backup-Name wird nach Auswahl in der Statusbar angezeigt. So weit klappt das so wie ich mir das vorstelle. Für heute ist Feierabend 😇