Skip to content

Vorstellung von Joplin

Linux
  • Joplin ist ein Programm zum Erstellen von Notizen oder To-Do-Listen, so ähnlich wie das kommerzielle Evernote. So Dienste wie Evernote habe ich früher auch benutzt, lehne ich aber mittlerweile komplett ab. Ich setze nur noch Software ein, wo ich die Kontrolle drüber habe. Und ganz wichtig = OpenSource!

    0_1524377755638_joplin.jpg
    Bildquelle: https://github.com/laurent22/joplin

    Das Linux AppImage was man herunterladen kann, sieht s bei mir aus.

    0_1524378145404_Linux_Desktop.png

    Und auf dem Smartphone so

    0_1524379400480_sp2.png

    Aber, welche Cloud nutzt man? Da Joplin End-to-End verschlüsselt, kann man getrost auch kommerzielle Dienste nutzen. Diese Dienste sind dann nicht mehr in der Lage mitzulesen. Aber, da eigene Kontrolle wichtig ist , wählen wir auch hier eine eigene Lösung.

    Nextcloud

    Diese Lösung hoste ich selber und kann nun damit meine Notizen usw. selber speichern und synchronisieren. So sieht das innerhalb von Nextcloud aus.

    0_1524378743598_nextcloud_joplin.png

    Kurze Kontrolle ob das File auch wirklich verschlüsselt ist.

    0_1524378794304_nextcloud_joplin2.png

    Das eingesetzte Verfahren ist AES256. Damit kann man ruhig schlafen und den Notizen auch mal was anvertrauen, was niemand anderes lesen soll. Hier wird das End-to-End Verfahren genau beschrieben https://joplin.cozic.net/spec/

    Voraussetzung wie immer, ein gutes Passwort!

    Viel Spaß beim Ausprobieren.

  • Nachdem ich Joplin jetzt schon ein paar Monate einsetze, musste ich jetzt nach einer Neuinstallation meines Haupt-PCs das Programm wieder installieren. So weit keine größeren Probleme, bis auf

    • ich musste das Syncronisationsziel auf WebDAV stellen, Nextcloud ging nicht so richtig!?
    • es kommt ein orangenes Wanfenster, mit irgendwas "Masterkey........", einfach den Rechner mal was länger anlassen, die Meldung verschwindet nach einiger Zeit von alleine.

    Joplin läuft jetzt wieder einwandfrei.

  • Heute das Ganze nochmal ausprobiert. 🙂

    Unter "Werkzeuge/Allgemeine Einstellungen"

    0_1539095579387_2541359f-78f0-4b14-b540-beddb80e7f45-grafik.png

    Danach auf "Synchronisieren" klicken. Nach kurzer Zeit fragt er nach dem fehlenden Passwort. Passwort eingeben und kurze Zeit später waren alle Daten wieder da. Diesmal ging das ruckzuck.

     Joplin 1.0.111 (prod, linux)
    

  • 0 Stimmen
    6 Beiträge
    2k Aufrufe
    I

    Vielen lieben Dank Nico!
    Jetzt läuft vaultwarden.

  • 0 Stimmen
    1 Beiträge
    312 Aufrufe
    Niemand hat geantwortet
  • 0 Stimmen
    1 Beiträge
    336 Aufrufe
    Niemand hat geantwortet
  • LUKS verschlüsselte Platte mounten

    Linux
    2
    0 Stimmen
    2 Beiträge
    631 Aufrufe
    FrankMF

    So, jetzt das ganze noch einen Ticken komplizierter 🙂

    Ich habe ja heute, für eine Neuinstallation von Ubuntu 20.04 Focal eine zweite NVMe SSD eingebaut. Meinen Bericht zu dem Thema findet ihr hier. Aber, darum soll es jetzt hier nicht gehen.

    Wir haben jetzt zwei verschlüsselte Ubuntu NVMe SSD Riegel im System. Jetzt klappt die ganze Sache da oben nicht mehr. Es kommt immer einen Fehlermeldung.

    unbekannter Dateisystemtyp „LVM2_member“.

    Ok, kurz googlen und dann findet man heraus, das es nicht klappen kann, weil beide LVM Gruppen, den selben Namen benutzen.

    root@frank-MS-7C37:/mnt/crypthome/root# vgdisplay --- Volume group --- VG Name vgubuntu2 System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size <464,53 GiB PE Size 4,00 MiB Total PE 118919 Alloc PE / Size 118919 / <464,53 GiB Free PE / Size 0 / 0 VG UUID lpZxyv-cNOS-ld2L-XgvG-QILa-caHS-AaIC3A --- Volume group --- VG Name vgubuntu System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 3 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size <475,71 GiB PE Size 4,00 MiB Total PE 121781 Alloc PE / Size 121781 / <475,71 GiB Free PE / Size 0 / 0 VG UUID jRYTXL-zjpY-lYr6-KODT-u0LJ-9fYf-YVDna7

    Hier oben sieht man das schon mit geändertem Namen. Der VG Name muss unterschiedlich sein. Auch dafür gibt es ein Tool.

    root@frank-MS-7C37:/mnt/crypthome/root# vgrename --help vgrename - Rename a volume group Rename a VG. vgrename VG VG_new [ COMMON_OPTIONS ] Rename a VG by specifying the VG UUID. vgrename String VG_new [ COMMON_OPTIONS ] Common options for command: [ -A|--autobackup y|n ] [ -f|--force ] [ --reportformat basic|json ] Common options for lvm: [ -d|--debug ] [ -h|--help ] [ -q|--quiet ] [ -v|--verbose ] [ -y|--yes ] [ -t|--test ] [ --commandprofile String ] [ --config String ] [ --driverloaded y|n ] [ --nolocking ] [ --lockopt String ] [ --longhelp ] [ --profile String ] [ --version ] Use --longhelp to show all options and advanced commands.

    Das muss dann so aussehen!

    vgrename lpZxyv-cNOS-ld2L-XgvG-QILa-caHS-AaIC3A vgubuntu2 ACHTUNG Es kann zu Datenverlust kommen, also wie immer, Hirn einschalten!

    Ich weiß, das die erste eingebaute Platte mit der Nummer /dev/nvme0n1 geführt wird. Die zweite, heute verbaute, hört dann auf den Namen /dev/nvme1n1. Die darf ich nicht anpacken, weil sonst das System nicht mehr startet.

    /etc/fstab

    # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> /dev/mapper/vgubuntu-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/nvme1n1p2 during installation UUID=178c7e51-a1d7-4ead-bbdf-a956eb7b754f /boot ext4 defaults 0 2 # /boot/efi was on /dev/nvme0n1p1 during installation UUID=7416-4553 /boot/efi vfat umask=0077 0 1 /dev/mapper/vgubuntu-swap_1 none swap sw 0 0

    Jo, wenn jetzt die Partition /dev/mapper/vgubuntu2-root / anstatt /dev/mapper/vgubuntu-root / heißt läuft nichts mehr. Nur um das zu verdeutlichen, auch das könnte man problemlos reparieren. Aber, ich möchte nur warnen!!

    Nachdem die Änderung durchgeführt wurde, habe ich den Rechner neugestartet. Puuh, Glück gehabt, richtige NVMe SSD erwischt 🙂

    Festplatte /dev/mapper/vgubuntu2-root: 463,58 GiB, 497754832896 Bytes, 972177408 Sektoren Einheiten: Sektoren von 1 * 512 = 512 Bytes Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes

    Nun können wir die Platte ganz normal, wie oben beschrieben, mounten. Nun kann ich noch ein paar Dinge kopieren 😉

  • Restic - forget --keep-last 3 --prune

    Restic
    2
    0 Stimmen
    2 Beiträge
    572 Aufrufe
    FrankMF

    Ich habe mich damit noch ein wenig beschäftigt, die letzten drei zu behalten, ist nicht so optimal. Da es viele Optionen bei dem Befehl gibt, hier ein Ausschnitt

    Flags: -l, --keep-last n keep the last n snapshots -H, --keep-hourly n keep the last n hourly snapshots -d, --keep-daily n keep the last n daily snapshots -w, --keep-weekly n keep the last n weekly snapshots -m, --keep-monthly n keep the last n monthly snapshots -y, --keep-yearly n keep the last n yearly snapshots

    habe ich das ein wenig so angepasst, das ich denke es passt für mich.

    restic --password-file /root/passwd -r /media/NAS_neu/Restic/Home/ forget --keep-last 3 --keep-monthly 3 --prune

    Damit behalte ich auch die jeweils eines pro Monat. Und die letzten drei. Das sieht dann so aus.

    root@debian:~# ./backup2.sh repository 2f3f6147 opened successfully, password is correct Files: 38 new, 100 changed, 13268 unmodified Dirs: 0 new, 1 changed, 0 unmodified Added to the repo: 10.166 GiB processed 13406 files, 50.324 GiB in 3:24 snapshot 849f614c saved repository 2f3f6147 opened successfully, password is correct Applying Policy: keep the last 3 snapshots, 3 monthly snapshots snapshots for (host [debian], paths [/home/frank]): keep 5 snapshots: ID Time Host Tags Reasons Paths ------------------------------------------------------------------------------------ a7251cfd 2019-11-28 17:00:01 debian monthly snapshot /home/frank 283d4027 2019-12-31 17:00:01 debian monthly snapshot /home/frank ae2b96ec 2020-01-01 21:47:46 debian last snapshot /home/frank 079e00a6 2020-01-02 17:00:01 debian last snapshot /home/frank 849f614c 2020-01-03 21:08:45 debian last snapshot /home/frank monthly snapshot ------------------------------------------------------------------------------------ 5 snapshots remove 26 snapshots: ID Time Host Tags Paths ------------------------------------------------------------------ 896f16c2 2019-11-07 22:23:40 debian /home/frank b21bcf6d 2019-11-11 17:00:01 debian /home/frank f89248fb 2019-11-12 17:00:01 debian /home/frank 123ab546 2019-11-13 17:00:01 debian /home/frank b82d87d0 2019-11-18 17:00:01 debian /home/frank 040b0ab7 2019-11-19 17:00:01 debian /home/frank 7221d8ef 2019-11-20 17:00:01 debian /home/frank 84132a25 2019-11-21 17:00:01 debian /home/frank b558a52c 2019-11-25 17:00:01 debian /home/frank e5cc0c3e 2019-12-02 17:00:01 debian /home/frank 22423fa5 2019-12-03 17:00:01 debian /home/frank 39df1ab9 2019-12-04 17:00:01 debian /home/frank 98843457 2019-12-05 17:00:01 debian /home/frank b0cdd4b6 2019-12-09 17:00:01 debian /home/frank 828414f9 2019-12-10 17:00:01 debian /home/frank e34a27c3 2019-12-11 17:00:01 debian /home/frank 6e488c3b 2019-12-12 17:00:01 debian /home/frank 17898403 2019-12-16 17:00:01 debian /home/frank 1973305a 2019-12-17 17:00:01 debian /home/frank 9553bedd 2019-12-18 17:00:01 debian /home/frank fedf749d 2019-12-19 17:00:01 debian /home/frank 8e7cb876 2019-12-23 17:00:01 debian /home/frank 0bd0d102 2019-12-25 17:00:01 debian /home/frank 13d348b0 2019-12-26 17:00:01 debian /home/frank c7d960aa 2019-12-30 17:00:01 debian /home/frank f6ea9118 2020-01-01 17:00:01 debian /home/frank ------------------------------------------------------------------ 26 snapshots 26 snapshots have been removed, running prune counting files in repo building new index for repo [0:35] 100.00% 7806 / 7806 packs repository contains 7806 packs (46537 blobs) with 41.110 GiB processed 46537 blobs: 0 duplicate blobs, 0 B duplicate load all snapshots find data that is still in use for 5 snapshots [0:01] 100.00% 5 / 5 snapshots found 32654 of 46537 data blobs still in use, removing 13883 blobs will remove 0 invalid files will delete 715 packs and rewrite 752 packs, this frees 5.027 GiB [2:28] 100.00% 752 / 752 packs rewritten counting files in repo [0:01] 100.00% 6571 / 6571 packs finding old index files saved new indexes as [d137b425 f7caee99 a6e9711a] remove 35 old index files [1:13] 100.00% 1467 / 1467 packs deleted done using temporary cache in /tmp/restic-check-cache-916655151 repository 2f3f6147 opened successfully, password is correct created new cache in /tmp/restic-check-cache-916655151 create exclusive lock for repository load indexes check all packs check snapshots, trees and blobs read all data [7:47] 100.00% 6571 / 6571 items duration: 7:47 no errors were found root@debian:~#

    Am Ende seht ihr noch, wie Restic alle Files testet. Mein Script sieht jetzt so aus.

    #!/bin/bash # Script um mit Restic Daten automatisiert zu sichern! # Dient zum Sichern der Homepartition auf dem ROCKPro64 NAS! # Was soll gesichert werden? backup_pfad=/home/frank # Programm Start restic --password-file /root/passwd -r /media/NAS_neu/Restic/Home/ backup $backup_pfad --exclude-file=excludes.txt restic --password-file /root/passwd -r /media/NAS_neu/Restic/Home/ forget --keep-last 3 --keep-monthly 3 --prune # Testen restic --password-file /root/passwd -r /media/NAS_neu/Restic/Home/ check --read-data

    Das dann schön mit einem Cronjob laufen lassen und die Datensicherung ist erledigt 😉

  • checkmk - Dockerinstallation

    Verschoben checkmk
    9
    0 Stimmen
    9 Beiträge
    949 Aufrufe
    FrankMF

    Und noch was Wichtiges.

    6777da6e-3b4f-41b9-bf6e-26496ae67cd8-grafik.png

    Damit sichert man den Datenaustausch ab.

    Kapitel 7.4. Inbuilt encryption

    Den Ordner findet man hier -> /etc/check_mk/encryption.cfg

  • Liste von Linuxbefehlen

    Angeheftet Linux
    3
    0 Stimmen
    3 Beiträge
    631 Aufrufe
    FrankMF
    systemd Anzeige der geladenen Dienste root@host:/etc/systemd/system# systemctl --type=service UNIT LOAD ACTIVE SUB DESCRIPTION atd.service loaded active running Deferred execution scheduler blk-availability.service loaded active exited Availability of block devices cloud-config.service loaded active exited Apply the settings specified in cloud-config cloud-final.service loaded active exited Execute cloud user/final scripts cloud-init-local.service loaded active exited Initial cloud-init job (pre-networking) cloud-init.service loaded active exited Initial cloud-init job (metadata service crawler) console-setup.service loaded active exited Set console font and keymap cron.service loaded active running Regular background program processing daemon crowdsec-firewall-bouncer.service loaded active running The firewall bouncer for CrowdSec crowdsec.service loaded active running Crowdsec agent dbus.service loaded active running D-Bus System Message Bus getty@tty1.service loaded active running Getty on tty1 ifupdown-pre.service loaded active exited Helper to synchronize boot up for ifupdown keyboard-setup.service loaded active exited Set the console keyboard layout kmod-static-nodes.service loaded active exited Create List of Static Device Nodes lvm2-monitor.service loaded active exited Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling mariadb.service loaded active running MariaDB 10.11.3 database server networking.service loaded active exited Raise network interfaces nginx.service loaded active running A high performance web server and a reverse proxy server qemu-guest-agent.service loaded active running QEMU Guest Agent resolvconf.service loaded active exited Nameserver information manager semaphore.service loaded active running Ansible Semaphore serial-getty@ttyS0.service loaded active running Serial Getty on ttyS0 ssh.service loaded active running OpenBSD Secure Shell server systemd-binfmt.service loaded active exited Set Up Additional Binary Formats systemd-fsck@dev-disk-by\x2duuid-1E22\x2dDC00.service loaded active exited File System Check on /dev/disk/by-uuid/1E22-DC00 systemd-journal-flush.service loaded active exited Flush Journal to Persistent Storage systemd-journald.service loaded active running Journal Service systemd-logind.service loaded active running User Login Management systemd-modules-load.service loaded active exited Load Kernel Modules systemd-random-seed.service loaded active exited Load/Save Random Seed systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems systemd-sysctl.service loaded active exited Apply Kernel Variables systemd-sysusers.service loaded active exited Create System Users systemd-timesyncd.service loaded active running Network Time Synchronization systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories systemd-udev-trigger.service loaded active exited Coldplug All udev Devices systemd-udevd.service loaded active running Rule-based Manager for Device Events and Files systemd-update-utmp.service loaded active exited Record System Boot/Shutdown in UTMP systemd-user-sessions.service loaded active exited Permit User Sessions ufw.service loaded active exited Uncomplicated firewall user-runtime-dir@0.service loaded active exited User Runtime Directory /run/user/0 user@0.service loaded active running User Manager for UID 0 LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 44 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'.
  • Installation von Grav & NGinx & PHP7.2

    Angeheftet Verschoben Grav
    2
    0 Stimmen
    2 Beiträge
    1k Aufrufe
    FrankMF

    Nachdem ich den ROCKPro64 jetzt auf den Mainline umgestellt habe, lief meine Testinstallation von Grav nicht mehr.

    Hilfreiche Sache um das Problem zu lösen -> https://gist.github.com/GhazanfarMir/03bd1f1f770a3834d47274586d46ea62

    Ich bekam immer 502 Bad Gateway, Grund war ein nicht korrekt gestarteter php-pfm Service.

    rock64@rockpro64v2_0:/usr/local/bin$ sudo service php7.2-fpm start rock64@rockpro64v2_0:/usr/local/bin$ sudo service php7.2-fpm status ● php7.2-fpm.service - The PHP 7.2 FastCGI Process Manager Loaded: loaded (/lib/systemd/system/php7.2-fpm.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2018-08-16 20:15:20 CEST; 21s ago Docs: man:php-fpm7.2(8) Main PID: 3206 (php-fpm7.2) Status: "Processes active: 0, idle: 2, Requests: 3, slow: 0, Traffic: 0.2req/sec" Tasks: 3 (limit: 4622) CGroup: /system.slice/php7.2-fpm.service ├─3206 php-fpm: master process (/etc/php/7.2/fpm/php-fpm.conf) ├─3207 php-fpm: pool www └─3208 php-fpm: pool www Aug 16 20:15:19 rockpro64v2_0 systemd[1]: Starting The PHP 7.2 FastCGI Process Manager... Aug 16 20:15:20 rockpro64v2_0 systemd[1]: Started The PHP 7.2 FastCGI Process Manager.