Skip to content

Shop-Bestellung

ROCKPro64

  • Armbian 20.08 (Caple) released

    Armbian
    1
    0 Stimmen
    1 Beiträge
    292 Aufrufe
    Niemand hat geantwortet
  • ROCKPro64 - Release 0.10.6 Was geht?

    Angeheftet ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    383 Aufrufe
    Niemand hat geantwortet
  • 0 Stimmen
    4 Beiträge
    529 Aufrufe
    FrankMF

    Das Setup heute mal getestet um zu sehen, ob das auch so funktioniert.

    LAN an meine Fritzbox (DHCP) an eth1.100 mein Notebook an eth1.200 meine PS4

    Und dann mal gemütlich eine Runde MW gezockt. Läuft alles einwandfrei 🙂

  • ROCKPro64 - Youtube 1080p & Netflix

    ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    310 Aufrufe
    Niemand hat geantwortet
  • Ayufan Release 0.7.13 (WiFi)

    ROCKPro64
    6
    0 Stimmen
    6 Beiträge
    461 Aufrufe
    FrankMF

    Für Bluetooth scheint noch was zu fehlen

    root@rockpro64:/mnt/home/rock64# service bluetooth status ● bluetooth.service - Bluetooth service Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled) Active: active (running) since Sat 2019-04-06 17:36:54 UTC; 2min 11s ago Docs: man:bluetoothd(8) Main PID: 2421 (bluetoothd) Status: "Running" Tasks: 1 (limit: 2380) CGroup: /system.slice/bluetooth.service └─2421 /usr/lib/bluetooth/bluetoothd Apr 06 17:36:54 rockpro64 systemd[1]: Starting Bluetooth service... Apr 06 17:36:54 rockpro64 bluetoothd[2421]: Bluetooth daemon 5.48 Apr 06 17:36:54 rockpro64 systemd[1]: Started Bluetooth service. Apr 06 17:36:54 rockpro64 bluetoothd[2421]: Starting SDP server Apr 06 17:36:54 rockpro64 bluetoothd[2421]: kernel lacks bnep-protocol support Apr 06 17:36:54 rockpro64 bluetoothd[2421]: System does not support network plugin Apr 06 17:36:54 rockpro64 bluetoothd[2421]: Bluetooth management interface 1.10 initialized
  • ROCKPro64 - kein WLan-Modul möglich?

    ROCKPro64
    4
    0 Stimmen
    4 Beiträge
    2k Aufrufe
    FrankMF

    Heute, 5 Monate später, kann ich bestätigen das WLan möglich ist 🙂 Getestet auf einem ROCKPro64 v2.1 mit 2GB RAM.

    Eine Vorabversion von Recalbox machte es das erste Mal für mich möglich das WLan zu benutzen. Bericht

    Und PCIe ist abgeschaltet im dts File.

    pcie-phy { compatible = "rockchip,rk3399-pcie-phy"; #phy-cells = <0x0>; rockchip,grf = <0x15>; clocks = <0x8 0x8a>; clock-names = "refclk"; resets = <0x8 0x87>; reset-names = "phy"; status = "disabled"; phandle = <0x8b>; }; pcie@f8000000 { compatible = "rockchip,rk3399-pcie"; #address-cells = <0x3>; #size-cells = <0x2>; aspm-no-l0s; clocks = <0x8 0xc5 0x8 0xc4 0x8 0x147 0x8 0xa0>; clock-names = "aclk", "aclk-perf", "hclk", "pm"; bus-range = <0x0 0x1f>; max-link-speed = <0x2>; linux,pci-domain = <0x0>; msi-map = <0x0 0x89 0x0 0x1000>; interrupts = <0x0 0x31 0x4 0x0 0x0 0x32 0x4 0x0 0x0 0x33 0x4 0x0>; interrupt-names = "sys", "legacy", "client"; #interrupt-cells = <0x1>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 0x8a 0x0 0x0 0x0 0x0 0x2 0x8a 0x1 0x0 0x0 0x0 0x3 0x8a 0x2 0x0 0x0 0x0 0x4 0x8a 0x3>; phys = <0x8b>; phy-names = "pcie-phy"; ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; reg = <0x0 0xf8000000 0x0 0x2000000 0x0 0xfd000000 0x0 0x1000000>; reg-names = "axi-base", "apb-base"; resets = <0x8 0x82 0x8 0x83 0x8 0x84 0x8 0x85 0x8 0x86 0x8 0x81 0x8 0x80>; reset-names = "core", "mgmt", "mgmt-sticky", "pipe", "pm", "pclk", "aclk"; status = "disabled";

    Also bleibt weiterhin ungeklärt, ob auch beides zusammen möglich ist. Also gleichzeitig das WLan-Modul und eine PCIe Karte.

  • Wichtig!

    Verschoben Archiv
    1
    0 Stimmen
    1 Beiträge
    724 Aufrufe
    Niemand hat geantwortet
  • u-boot-erase-spi-rockpro64.img.xz

    Verschoben Tools
    1
    0 Stimmen
    1 Beiträge
    877 Aufrufe
    Niemand hat geantwortet