Skip to content

Images 0.6.x

Moved Images
  • 0.6.52 bringt den PCIe Slot endlich zum Leben. ☝

    Mehr Info's hier.
    Mehr Tests folgen die Tage.

  • Image 0.6.53 ist am Bauen.

    • 0.6.53: Support eMMC booting,
    • 0.6.53: Compile a lot of stuff as kernel modules,

    eMMC Modul habe ich nicht hier rumliegen.

  • Image 0.6.54 ist am Bauen.

  • 0.6.55 released

    • 0.6.55: Make rockchip phy drivers to be built-in,

    Alles beim Alten, seit 0.6.52 bekomme ich kein Image mehr zum Starten. 0.6.52 zickt beim Booten zwar auch, aber wenn es läuft kann man wenigstens etwas damit anfangen. Crasht aber manchmal, aber sehr selten. So kann man wenigstens ein paar Sachen testen. Ich bleibe dabei "zu viele Baustellen"..

  • 0.6.56 ist am Bauen

    • 0.6.56: Remove dma plat init to have bigger buffers everywhere 🙂

    Soll das Audio Problem fixen

  • Das nächste Image 0.6.57 beinhaltet folgende Änderungen. ☝

    • 0.6.57: Make HDMI a first audio device for rockpro64,
    • 0.6.57: Remove some of the failures from bootlog,
    • 0.6.57: Temporarily disable GPU,

    Das scheint ja so, als wenn wir das erste Image seit langem haben, was öfter mal sauber bootet. Aber, die GPU ist abgeschaltet.
    Den Sound kann ich nicht testen, da ich an meinem Monitor keine Boxen habe.

  • Images, die ich mit folgendem Symbol markiert habe ☝ die kann man zum Testen mal flashen. Der Rest war für mich kein Gewinn. Aber, ganz klare Empfehlung von mir, benutzt Mainline! Der macht trotz seiner Einschränkungen schon recht viel Spaß!

  • 0.6.58 released

    • 0.6.58: Enable AHCI in 4.4 kernel making pcie-sata bridge to work,
    • 0.6.58: Introduce new_extlinux_boot.sh that uses / for booting and allows to choose any kernel,
    • 0.6.58: Properly assign pcie/ahci/eth0 for rockpro64,
    • 0.6.58: Enable USB3 on mainline kernel,

    Noch nicht alles getestet außer gestern Abend auf die Schnelle USB3 auf Mainline. Das funktioniert jetzt 🙂
    Andere Tests folgen später.

  • 0.6.59 released ☝

    • 0.6.59: Fix u-boot dtb: fixes reboot, cpu stability issues, usb2/type-c booting,
    • 0.6.59: Enable leds support in u-boot,
    • 0.6.59: Fix rock64_upgrade_bootloader.sh script,
    • 0.6.59: Fix extlinux kernel sorting,
    • 0.6.59: Copy-paste evb_rk3399 to rockpro64_rk3399 in u-boot,
    • 0.6.59: Use proper fcs,suspend-voltage-selector for vdd_cpu_b on mainline kernel,
    • 0.6.59: Rebase mainline kernel on 4.18.0-rc3 (requires 0.6.59 u-boot),
    • 0.6.59: Rebase 4.4 kernel on rockchip-linux/kernel@40e8774,

    Kamil war gestern Abend noch fleißig 🙂

    Beim Booten von 0.6.59 kommen zwar immer noch die Memory Fehler, aber irgendwann startet es mal. Die NVMe-Karte wurde nicht eingebunden. Aber hiermit war das kein Problem.

    Danach gibt die NVMe-Karte folgendes aus

    root@rockpro64:/home/rock64# lspci -vvv
    00:00.0 PCI bridge: Rockchip Inc. RK3399 PCI Express Root Port Device 0100 (prog-if 00 [Normal decode])
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort+ >SERR+ <PERR+ INTx-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 236
    	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    	I/O behind bridge: 00000000-00000fff
    	Memory behind bridge: fa000000-fa0fffff
    	Prefetchable memory behind bridge: 00000000-000fffff
    	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    	Capabilities: [80] Power Management version 3
    		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
    		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME+
    	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable+ 64bit+
    		Address: 00000000fee30040  Data: 0000
    		Masking: 00000000  Pending: 00000000
    	Capabilities: [b0] MSI-X: Enable- Count=1 Masked-
    		Vector table: BAR=0 offset=00000000
    		PBA: BAR=0 offset=00000008
    	Capabilities: [c0] Express (v2) Root Port (Slot+), MSI 00
    		DevCap:	MaxPayload 256 bytes, PhantFunc 0
    			ExtTag- RBE+
    		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    			MaxPayload 128 bytes, MaxReadReq 512 bytes
    		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    		LnkCap:	Port #0, Speed 5GT/s, Width x4, ASPM L1, Exit Latency L0s <256ns, L1 <8us
    			ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
    		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk-
    			ExtSynch- ClockPM- AutWidDis- BWInt+ AutBWInt+
    		LnkSta:	Speed 5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
    		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
    			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
    		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    			Control: AttnInd Off, PwrInd Off, Power+ Interlock-
    		SltSta:	Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet- Interlock-
    			Changed: MRL- PresDet- LinkState-
    		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
    		RootCap: CRSVisible-
    		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    		DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Via message ARIFwd+
    		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
    		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
    			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    			 Compliance De-emphasis: -6dB
    		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
    	Capabilities: [100 v2] Advanced Error Reporting
    		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
    		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
    	Capabilities: [274 v1] Transaction Processing Hints
    		Interrupt vector mode supported
    		Device specific mode supported
    		Steering table in TPH capability structure
    	Kernel driver in use: pcieport
    
    01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 (prog-if 02 [NVM Express])
    	Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 235
    	Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=16K]
    	Capabilities: [40] Power Management version 3
    		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    	Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
    		Address: 0000000000000000  Data: 0000
    	Capabilities: [70] Express (v2) Endpoint, MSI 00
    		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
    			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
    		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
    			MaxPayload 128 bytes, MaxReadReq 512 bytes
    		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    		LnkCap:	Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L0s unlimited, L1 <64us
    			ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
    		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk-
    			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
    		LnkSta:	Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Not Supported
    		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
    		LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
    			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    			 Compliance De-emphasis: -6dB
    		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
    	Capabilities: [b0] MSI-X: Enable+ Count=8 Masked-
    		Vector table: BAR=0 offset=00003000
    		PBA: BAR=0 offset=00002000
    	Capabilities: [100 v2] Advanced Error Reporting
    		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
    		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
    	Capabilities: [148 v1] Device Serial Number 00-00-00-00-00-00-00-00
    	Capabilities: [158 v1] Power Budgeting <?>
    	Capabilities: [168 v1] #19
    	Capabilities: [188 v1] Latency Tolerance Reporting
    		Max snoop latency: 0ns
    		Max no snoop latency: 0ns
    	Capabilities: [190 v1] L1 PM Substates
    		L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
    			  PortCommonModeRestoreTime=10us PortTPowerOnTime=10us
    		L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
    			   T_CommonMode=0us LTR1.2_Threshold=0ns
    		L1SubCtl2: T_PwrOn=10us
    	Kernel driver in use: nvme
    

    Da ist ja endlich das x4 !!!

    LnkSta:	Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    

    Speedtest

    root@rockpro64:/mnt# sudo dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
    4096+0 records in
    4096+0 records out
    4294967296 bytes (4.3 GB, 4.0 GiB) copied, 11.3636 s, 378 MB/s
    

    und

    root@rockpro64:/mnt# sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 
     	Iozone: Performance Test of File I/O
     	        Version $Revision: 3.429 $
     		Compiled for 64 bit mode.
     		Build: linux 
     
     	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
     	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
     	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
     	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
     	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
     	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
     	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
     	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
     
     	Run began: Wed Jul  4 03:21:54 2018
     
     	Include fsync in write timing
     	O_DIRECT feature enabled
     	Auto Mode
     	File size set to 102400 kB
     	Record Size 4 kB
     	Record Size 16 kB
     	Record Size 512 kB
     	Record Size 1024 kB
     	Record Size 16384 kB
     	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
     	Output is in kBytes/sec
     	Time Resolution = 0.000001 seconds.
     	Processor cache size set to 1024 kBytes.
     	Processor cache line size set to 32 bytes.
     	File stride size set to 17 * record size.
                                                                   random    random     bkwd    record    stride                                    
                   kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
               102400       4    69551   109290   128601   114462    25822    73054                                                          
               102400      16   133640   240685   269449   273207   117705   192497                                                          
               102400     512   582963   588868   458828   465076   417720   551456                                                          
               102400    1024   519443   628637   490247   497807   468750   627362                                                          
               102400   16384   977517  1048544  1032961  1097595  1070311  1094686   
    

    Das sieht und "fühlt" sich schon viel besser an 🙂

    Das hier

    0.6.59: Rebase mainline kernel on 4.18.0-rc3 (requires 0.6.59 u-boot),
    

    bedeutet, das ich meine Mainline Installation mit einer 0.6.59 Installation erneut machen muss, damit der neue u-boot benutzt wird. Doch erst mal Geld verdienen... 😉

  • 0.6.60 released

    • 0.6.60: Fix pcie/nvme/sata support for 4.4,
    • 0.6.60: Fix spi-flash access for 4.4/mainline,

    Ich bin davon ausgegangen, das 0.6.x nict mehr fortgeführt wird, okay - sieht nicht so aus.

    Sollte released werden, ist aber aus irgendeinem Grund gestern nicht passiert (lt. Kamil)

  • Images 0.10.x

    Pinned Images
    10
    0 Votes
    10 Posts
    415 Views
    FrankMF

    0.10.12: gitlab-ci-linux-build-184 released

    0.10.12: Be strict on any qemu failures 0.10.12: Build by default mate/lxde/gnome/xfce4 0.10.12: Add pcie scan delay from @nuumio 0.10.12: Add ubuntu-mate-lightdm-theme where possible

    Ich komme gar nicht mehr mit dem Testen hinterher 🙂

  • Mainline 5.4.x

    Images
    2
    0 Votes
    2 Posts
    327 Views
    FrankMF

    Bootet bei mir weder von USB3-SSD noch von SD-Karte.

    USB3-SSD -> https://pastebin.com/QAS92sme
    SD-Karte -> https://pastebin.com/Bsr3WLJ7

  • Images 0.9.x

    Images
    13
    0 Votes
    13 Posts
    763 Views
    FrankMF

    0.9.16: gitlab-ci-linux-build-163 released

    0.9.x 0.9.16: Bump kernel to 4.4.197, 0.9.15: Bump kernel to 4.4.193, 0.9.14: Bump kernel to 4.4.190, 0.9.14: Fix Firefox video playback, 0.9.13: Bump sound volume for Pinebook Pro, 0.9.12: Fix LXDE for Rock64, 0.9.10: Fix support for power/standby LEDs for all boards,
  • Batocera Image released

    Images
    1
    0 Votes
    1 Posts
    268 Views
    No one has replied
  • 0 Votes
    2 Posts
    890 Views
    FrankMF

    Das Resize-Problem der Partition, nachdem man das System auf einer USB3-HDD installiert hat, ist in

    Welcome to ARMBIAN 5.67.181217 nightly Debian GNU/Linux 9 (stretch) 4.4.167-rockchip64

    gefixt. Eine echte Verbesserung!

  • 0 Votes
    2 Posts
    1k Views
    FrankMF

    Sieht so aus, als wenn wir ein neues Traumpaar haben. 🙂

    0.7.7

    und

    rock64@rockpro64:/mnt$ uname -a Linux rockpro64 4.18.0-rc3-1046-ayufan-ge76778b6aa4b #1 SMP PREEMPT Thu Jul 19 14:10:17 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux
  • nodejs & NodeBB

    ROCKPro64
    1
    0 Votes
    1 Posts
    505 Views
    No one has replied
  • 0 Votes
    5 Posts
    1k Views
    FrankMF

    Neue Version

    Stock for install from SDcard to eMMC [microSD Boot] [20180921]

    Link Preview Image ROCKPro64 Software Releases

    favicon

    PINE64 (wiki.pine64.org)