linux-nerds.org

Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

ROCKPro64 - PCIe SATA-Karte macht immer mal Probleme

ROCKPro64

2 Beiträge 1 Kommentatoren 485 Aufrufe

F Offline
F Offline
FrankM
schrieb am zuletzt editiert von FrankM

#1
Ich habe ja ein NAS mit dieser Karte aufgebaut und es auch lange so benutzt. Aber immer wieder kam es zu, für mich, unerklärlichen Problemen.

Eine Platte des RAID1 verschwindet einfach so. Haufenweise Errormeldungen in dmesg. Einen Verdacht, den ich schon länger hege, könnte evt. auch was mit diesem Thread zu tuen haben.

Rockpro64 Sata Card kills itself

(forum.pine64.org)

Interessanterweise kommt das Thema Stromversorgung da zur Sprache. Ich benutze für das NAS das 3A Netzteil und habe mir da mit zwei 2,5 Zoll HDDs nie Sorgen drum gemacht. Da ich den Verdacht habe, das die Probleme nur bei sehr viel Schreibarbeit der Platten vorkommt, könnte es doch was mit der Stromversorgung zu tuen haben.

Zwei Optionen hätte ich zum Testen
- 5A Netzteil von Pine64
- ATX Netzteil
Aktuell läuft das NAS ohne Probleme seit 6 Tagen, hat aber auch zur Zeit nichts zu tuen.
```
rock64@rockpro64v_2_1:~$ uptime
 13:40:05 up 6 days, 18:22,  1 user,  load average: 0,00, 0,00, 0,00
```
Fangen wir mit dem 5A-Netzteil an und richten mal wieder einen Cronjob ein, der was Stress erzeugt
Im Fediverse -> @FrankM@nrw.social
1. NanoPi R5S
2. Quartz64 Model B, 4GB RAM
3. Quartz64 Model A, 4GB RAM
4. RockPro64 v2.1
1 Antwort Letzte Antwort
0

FrankM

schrieb am

Das ist das Ergebnis des Stresstests

[ 2461.489468] ata2.00: exception Emask 0x10 SAct 0xffffffff SErr 0x400000 action 0x6 frozen
[ 2461.490206] ata2.00: irq_stat 0x08000000, interface fatal error
[ 2461.490732] ata2: SError: { Handshk }
[ 2461.491062] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.491532] ata2.00: cmd 61/40:00:f8:a6:64/05:00:84:00:00/40 tag 0 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.492993] ata2.00: status: { DRDY }
[ 2461.493327] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.493796] ata2.00: cmd 61/c0:08:38:ac:64/03:00:84:00:00/40 tag 1 ncq dma 491520 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.495181] ata2.00: status: { DRDY }
[ 2461.495507] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.496276] ata2.00: cmd 61/c0:10:a0:f5:64/02:00:84:00:00/40 tag 2 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.497697] ata2.00: status: { DRDY }
[ 2461.498029] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.498497] ata2.00: cmd 61/40:18:60:f8:64/05:00:84:00:00/40 tag 3 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.499886] ata2.00: status: { DRDY }
[ 2461.500213] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.500681] ata2.00: cmd 61/c0:20:a0:fd:64/02:00:84:00:00/40 tag 4 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.502087] ata2.00: status: { DRDY }
[ 2461.502416] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.502884] ata2.00: cmd 61/40:28:60:00:65/05:00:84:00:00/40 tag 5 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.505026] ata2.00: status: { DRDY }
[ 2461.505378] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.505852] ata2.00: cmd 61/c0:30:a0:05:65/02:00:84:00:00/40 tag 6 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.507244] ata2.00: status: { DRDY }
[ 2461.507572] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.508040] ata2.00: cmd 61/40:38:60:08:65/05:00:84:00:00/40 tag 7 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.509472] ata2.00: status: { DRDY }
[ 2461.509808] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.510277] ata2.00: cmd 61/a0:40:a0:0d:65/02:00:84:00:00/40 tag 8 ncq dma 344064 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.511667] ata2.00: status: { DRDY }
[ 2461.511994] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.512461] ata2.00: cmd 61/40:48:00:20:66/05:00:84:00:00/40 tag 9 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.514503] ata2.00: status: { DRDY }
[ 2461.514850] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.515322] ata2.00: cmd 61/40:50:00:28:66/05:00:84:00:00/40 tag 10 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.516721] ata2.00: status: { DRDY }
[ 2461.517084] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.517562] ata2.00: cmd 61/c0:58:40:2d:66/02:00:84:00:00/40 tag 11 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.519253] ata2.00: status: { DRDY }
[ 2461.519595] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.520066] ata2.00: cmd 61/40:60:f8:9e:64/05:00:84:00:00/40 tag 12 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.521504] ata2.00: status: { DRDY }
[ 2461.521840] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.522309] ata2.00: cmd 61/c0:68:38:a4:64/02:00:84:00:00/40 tag 13 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.523706] ata2.00: status: { DRDY }
[ 2461.524033] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.524501] ata2.00: cmd 61/40:70:f8:af:64/05:00:84:00:00/40 tag 14 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.525925] ata2.00: status: { DRDY }
[ 2461.526256] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.526725] ata2.00: cmd 61/c0:78:38:b5:64/02:00:84:00:00/40 tag 15 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.528122] ata2.00: status: { DRDY }
[ 2461.528449] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.528939] ata2.00: cmd 61/40:80:f8:b7:64/05:00:84:00:00/40 tag 16 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.530339] ata2.00: status: { DRDY }
[ 2461.530667] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.531136] ata2.00: cmd 61/c0:88:38:bd:64/02:00:84:00:00/40 tag 17 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.532532] ata2.00: status: { DRDY }
[ 2461.532880] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.533357] ata2.00: cmd 61/40:90:f8:bf:64/05:00:84:00:00/40 tag 18 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.534754] ata2.00: status: { DRDY }
[ 2461.535081] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.535549] ata2.00: cmd 61/c0:98:38:c5:64/02:00:84:00:00/40 tag 19 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.536970] ata2.00: status: { DRDY }
[ 2461.537301] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.537769] ata2.00: cmd 61/40:a0:f8:c7:64/05:00:84:00:00/40 tag 20 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.539165] ata2.00: status: { DRDY }
[ 2461.539491] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.539960] ata2.00: cmd 61/c0:a8:38:cd:64/02:00:84:00:00/40 tag 21 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.541381] ata2.00: status: { DRDY }
[ 2461.541713] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.542182] ata2.00: cmd 61/40:b0:f8:cf:64/05:00:84:00:00/40 tag 22 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.543577] ata2.00: status: { DRDY }
[ 2461.543905] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.544374] ata2.00: cmd 61/40:b8:f8:d7:64/05:00:84:00:00/40 tag 23 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.545790] ata2.00: status: { DRDY }
[ 2461.546120] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.546589] ata2.00: cmd 61/c0:c0:38:dd:64/02:00:84:00:00/40 tag 24 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.547987] ata2.00: status: { DRDY }
[ 2461.548314] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.548782] ata2.00: cmd 61/a8:c8:f8:df:64/05:00:84:00:00/40 tag 25 ncq dma 741376 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.550198] ata2.00: status: { DRDY }
[ 2461.550530] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.550999] ata2.00: cmd 61/c0:d0:a0:e5:64/02:00:84:00:00/40 tag 26 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.552396] ata2.00: status: { DRDY }
[ 2461.552723] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.553208] ata2.00: cmd 61/40:d8:60:e8:64/05:00:84:00:00/40 tag 27 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.554607] ata2.00: status: { DRDY }
[ 2461.554935] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.555404] ata2.00: cmd 61/c0:e0:a0:ed:64/02:00:84:00:00/40 tag 28 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.556800] ata2.00: status: { DRDY }
[ 2461.557145] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.557617] ata2.00: cmd 61/40:e8:60:f0:64/05:00:84:00:00/40 tag 29 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.559012] ata2.00: status: { DRDY }
[ 2461.559340] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.559807] ata2.00: cmd 61/c0:f0:38:d5:64/02:00:84:00:00/40 tag 30 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.561221] ata2.00: status: { DRDY }
[ 2461.561552] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.562021] ata2.00: cmd 61/c0:f8:40:25:66/02:00:84:00:00/40 tag 31 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.563416] ata2.00: status: { DRDY }
[ 2461.563752] ata2: hard resetting link
[ 2471.561504] ata2: softreset failed (1st FIS failed)
[ 2471.561959] ata2: hard resetting link
[ 2481.560785] ata2: softreset failed (1st FIS failed)
[ 2481.561238] ata2: hard resetting link
[ 2516.561654] ata2: softreset failed (1st FIS failed)
[ 2516.562109] ata2: limiting SATA link speed to 3.0 Gbps
[ 2516.562113] ata2: hard resetting link
[ 2521.561261] ata2: softreset failed (1st FIS failed)
[ 2521.561715] ata2: reset failed, giving up
[ 2521.562074] ata2.00: disabled
[ 2521.562575] ata2: EH complete
[ 2521.562677] sd 1:0:0:0: [sdb] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.562686] sd 1:0:0:0: [sdb] tag#18 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
[ 2521.562701] print_req_error: I/O error, dev sdb, sector 0
[ 2521.562791] sd 1:0:0:0: [sdb] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.562802] sd 1:0:0:0: [sdb] tag#19 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.562873] sd 1:0:0:0: [sdb] tag#19 CDB: opcode=0x2a 2a 00 84 66 25 40 00 02 c0 00
[ 2521.562888] print_req_error: I/O error, dev sdb, sector 2221286720
[ 2521.563107] sd 1:0:0:0: [sdb] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.563126] sd 1:0:0:0: [sdb] tag#21 CDB: opcode=0x2a 2a 00 84 64 f0 60 00 05 40 00
[ 2521.563138] print_req_error: I/O error, dev sdb, sector 2221207648
[ 2521.563422] sd 1:0:0:0: [sdb] tag#22 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.563772] sd 1:0:0:0: [sdb] tag#20 CDB: opcode=0x2a 2a 00 84 64 d5 38 00 02 c0 00
[ 2521.564326] print_req_error: I/O error, dev sdb, sector 2221200696
[ 2521.564337] sd 1:0:0:0: [sdb] tag#22 CDB: opcode=0x2a 2a 00 84 64 ed a0 00 02 c0 00
[ 2521.564896] print_req_error: I/O error, dev sdb, sector 2221206944
[ 2521.565088] sd 1:0:0:0: [sdb] tag#26 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.565469] sd 1:0:0:0: [sdb] tag#26 CDB: opcode=0x2a 2a 00 84 64 dd 38 00 02 c0 00
[ 2521.565483] print_req_error: I/O error, dev sdb, sector 2221202744
[ 2521.565610] sd 1:0:0:0: [sdb] tag#23 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.566056] sd 1:0:0:0: [sdb] tag#23 CDB: opcode=0x2a 2a 00 84 64 e8 60 00 05 40 00
[ 2521.566069] print_req_error: I/O error, dev sdb, sector 2221205600
[ 2521.566183] sd 1:0:0:0: [sdb] tag#29 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.566641] sd 1:0:0:0: [sdb] tag#29 CDB: opcode=0x2a 2a 00 84 64 cd 38 00 02 c0 00
[ 2521.566654] print_req_error: I/O error, dev sdb, sector 2221198648
[ 2521.566954] sd 1:0:0:0: [sdb] tag#24 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.567224] sd 1:0:0:0: [sdb] tag#24 CDB: opcode=0x2a 2a 00 84 64 e5 a0 00 02 c0 00
[ 2521.567237] print_req_error: I/O error, dev sdb, sector 2221204896
[ 2521.567459] sd 1:0:0:0: [sdb] tag#30 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.567809] sd 1:0:0:0: [sdb] tag#30 CDB: opcode=0x2a 2a 00 84 64 c7 f8 00 05 40 00
[ 2521.567821] print_req_error: I/O error, dev sdb, sector 2221197304
[ 2521.584903] md: super_written gets error=10
[ 2521.585306] md/raid1:md0: Disk failure on dm-1, disabling device.
               md/raid1:md0: Operation continuing on 1 devices.
[ 2526.581450] scsi_io_completion_action: 41779 callbacks suppressed
[ 2526.581461] sd 1:0:0:0: [sdb] tag#27 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.581467] sd 1:0:0:0: [sdb] tag#27 CDB: opcode=0x2a 2a 00 84 66 7d 50 00 00 01 00
[ 2526.581469] print_req_error: 41780 callbacks suppressed
[ 2526.581471] print_req_error: I/O error, dev sdb, sector 2221309264
[ 2526.582524] sd 1:0:0:0: [sdb] tag#28 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.582530] sd 1:0:0:0: [sdb] tag#28 CDB: opcode=0x2a 2a 00 84 66 7d 51 00 00 01 00
[ 2526.582534] print_req_error: I/O error, dev sdb, sector 2221309265
[ 2526.583366] sd 1:0:0:0: [sdb] tag#29 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.583370] sd 1:0:0:0: [sdb] tag#29 CDB: opcode=0x2a 2a 00 84 66 7d 52 00 00 01 00
[ 2526.583373] print_req_error: I/O error, dev sdb, sector 2221309266
[ 2526.584113] sd 1:0:0:0: [sdb] tag#30 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.584117] sd 1:0:0:0: [sdb] tag#30 CDB: opcode=0x2a 2a 00 84 66 7d 53 00 00 01 00
[ 2526.584119] print_req_error: I/O error, dev sdb, sector 2221309267
[ 2526.584960] sd 1:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.584968] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 84 66 7d 54 00 00 01 00
[ 2526.584971] print_req_error: I/O error, dev sdb, sector 2221309268
[ 2526.585765] sd 1:0:0:0: [sdb] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.585769] sd 1:0:0:0: [sdb] tag#1 CDB: opcode=0x2a 2a 00 84 66 7d 55 00 00 01 00
[ 2526.585772] print_req_error: I/O error, dev sdb, sector 2221309269
[ 2526.586461] sd 1:0:0:0: [sdb] tag#2 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.586465] sd 1:0:0:0: [sdb] tag#2 CDB: opcode=0x2a 2a 00 84 66 7d 56 00 00 01 00
[ 2526.586468] print_req_error: I/O error, dev sdb, sector 2221309270
[ 2526.587144] sd 1:0:0:0: [sdb] tag#3 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.587148] sd 1:0:0:0: [sdb] tag#3 CDB: opcode=0x2a 2a 00 84 66 7d 57 00 00 01 00
[ 2526.587150] print_req_error: I/O error, dev sdb, sector 2221309271
[ 2526.587734] sd 1:0:0:0: [sdb] tag#4 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.587737] sd 1:0:0:0: [sdb] tag#4 CDB: opcode=0x2a 2a 00 84 66 7d 58 00 00 01 00
[ 2526.587739] print_req_error: I/O error, dev sdb, sector 2221309272
[ 2526.588320] sd 1:0:0:0: [sdb] tag#5 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.588323] sd 1:0:0:0: [sdb] tag#5 CDB: opcode=0x2a 2a 00 84 66 7d 59 00 00 01 00
[ 2526.588325] print_req_error: I/O error, dev sdb, sector 2221309273

Und, wieder eine Platte im Raid1 verloren

rock64@rockpro64v_2_1:~$ cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] 
md0 : active raid1 dm-1[2](F) dm-0[1]
      1953379392 blocks super 1.2 [2/1] [_U]
      bitmap: 5/15 pages [20KB], 65536KB chunk

unused devices: <none>

Leider habe ich nicht die Kenntnisse um zu erkennen, woran das liegt.

F

ROCKPro64 - Projekt Wireguard Server
Geplant Angeheftet Gesperrt Verschoben ROCKPro64 linux rockpro64 wireguard
2

0 Stimmen

2 Beiträge

445 Aufrufe

F

Hat ein wenig Nerven gekostet und der Artikel ist auch was länger geworden 🙂 Viel Spaß beim Lesen und testen!
F

SATA Adapter - SSD kopieren
Geplant Angeheftet Gesperrt Verschoben Hardware rockpro64
1

0 Stimmen

1 Beiträge

180 Aufrufe

Niemand hat geantwortet
F

ROCKPro64 - Reset per SSH funktioniert nicht (Kernel 4.4.x)
Geplant Angeheftet Gesperrt Verschoben ROCKPro64 rockpro64
14

0 Stimmen

14 Beiträge

2k Aufrufe

K

halli hallo & zusammen,
in Allgemeinen lässt sich selten empfehlen, auf verdacht alles zu updaten, sobald irgend etwas nicht tut. Oftmals holt man sich lediglich neue Ungewissheit ins Boot. Es hilft eher zu wissen, wo es (denn ungefähr) hakt.

Wie Frank in etwa bereits angesprochen hat ist es ungemein hilfreich zu sehen "was ab geht". Sprich die serielle "Schnitte" anzuklemmen. Das ist wirklich kein Hexenwerk, braucht aber einen Pegelwandler.
Andernfalls ist die Gefahr hoch, dass man mit Rätselraten einen Abend ohne Ergebnis in den Sand setzt. Hab ich einmal mit diesem Board hinter mir, dann die serielle Komm angeklemmt.
Ein ResetProb hab ich zumindest mit eMMC noch nicht beobachtet. Dabei habe ich viel Kernel gewechselt (nie den uboot) und 'reboot' getippt. Ab und an hängt er anscheinend bei Initialisierung der tty's, aber ich mag mich irren. Für das Prob von @killlah78 fehlt für mehr einfach ein output
gruß
F

[HOWTO] SD-Karte beschreiben
Geplant Angeheftet Gesperrt Verschoben ROCKPro64 howto einsteiger
1

0 Stimmen

1 Beiträge

445 Aufrufe

Niemand hat geantwortet
F

NVMe-Platte einrichten
Geplant Angeheftet Gesperrt Verschoben ROCKPro64 einsteiger rockpro64
1

0 Stimmen

1 Beiträge

1k Aufrufe

Niemand hat geantwortet
F

Bionic Minimal 0.7.8
Geplant Angeheftet Gesperrt Verschoben ROCKPro64 rockpro64
2

0 Stimmen

2 Beiträge

554 Aufrufe

F

Testin Testing
F

[HOWTO] ROCKPro64 - PCIe NVMe Karte mit Samsung 960 EVO m.2
Geplant Angeheftet Gesperrt Verschoben Hardware howto hardware rockpro64
2

0 Stimmen

2 Beiträge

2k Aufrufe

F

Ergänzung
Eine andere SATA-Karte und eine Riser-Karte mit angeschlossener GPU startet nicht.
rock64@rockpro64v2_1:~$ uname -a Linux rockpro64v2_1 4.4.132-1075-rockchip-ayufan-ga83beded8524 #1 SMP Thu Jul 26 08:22:22 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux
F

Mainline Kernel 4.17-rc7
Geplant Angeheftet Gesperrt Verschoben Archiv rockpro64
8

0 Stimmen

8 Beiträge

2k Aufrufe

F

4.17.0-rc6-1029-ayufan released

Link Preview Image Releases · ayufan-rock64/linux-mainline-kernel
Linux kernel source tree. Contribute to ayufan-rock64/linux-mainline-kernel development by creating an account on GitHub.
favicon
GitHub (github.com)

Seit 1021 funktioniert USB3.