Skip to content

ROCKPro64 - PCIe SATA-Karte macht immer mal Probleme

ROCKPro64
  • Ich habe ja ein NAS mit dieser Karte aufgebaut und es auch lange so benutzt. Aber immer wieder kam es zu, für mich, unerklärlichen Problemen.

    Eine Platte des RAID1 verschwindet einfach so. Haufenweise Errormeldungen in dmesg. Einen Verdacht, den ich schon länger hege, könnte evt. auch was mit diesem Thread zu tuen haben.

    Interessanterweise kommt das Thema Stromversorgung da zur Sprache. Ich benutze für das NAS das 3A Netzteil und habe mir da mit zwei 2,5 Zoll HDDs nie Sorgen drum gemacht. Da ich den Verdacht habe, das die Probleme nur bei sehr viel Schreibarbeit der Platten vorkommt, könnte es doch was mit der Stromversorgung zu tuen haben.

    Zwei Optionen hätte ich zum Testen

    • 5A Netzteil von Pine64
    • ATX Netzteil

    Aktuell läuft das NAS ohne Probleme seit 6 Tagen, hat aber auch zur Zeit nichts zu tuen.

    rock64@rockpro64v_2_1:~$ uptime
     13:40:05 up 6 days, 18:22,  1 user,  load average: 0,00, 0,00, 0,00
    

    Fangen wir mit dem 5A-Netzteil an und richten mal wieder einen Cronjob ein, der was Stress erzeugt 😉

  • Das ist das Ergebnis des Stresstests 😞

    [ 2461.489468] ata2.00: exception Emask 0x10 SAct 0xffffffff SErr 0x400000 action 0x6 frozen
    [ 2461.490206] ata2.00: irq_stat 0x08000000, interface fatal error
    [ 2461.490732] ata2: SError: { Handshk }
    [ 2461.491062] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.491532] ata2.00: cmd 61/40:00:f8:a6:64/05:00:84:00:00/40 tag 0 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.492993] ata2.00: status: { DRDY }
    [ 2461.493327] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.493796] ata2.00: cmd 61/c0:08:38:ac:64/03:00:84:00:00/40 tag 1 ncq dma 491520 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.495181] ata2.00: status: { DRDY }
    [ 2461.495507] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.496276] ata2.00: cmd 61/c0:10:a0:f5:64/02:00:84:00:00/40 tag 2 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.497697] ata2.00: status: { DRDY }
    [ 2461.498029] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.498497] ata2.00: cmd 61/40:18:60:f8:64/05:00:84:00:00/40 tag 3 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.499886] ata2.00: status: { DRDY }
    [ 2461.500213] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.500681] ata2.00: cmd 61/c0:20:a0:fd:64/02:00:84:00:00/40 tag 4 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.502087] ata2.00: status: { DRDY }
    [ 2461.502416] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.502884] ata2.00: cmd 61/40:28:60:00:65/05:00:84:00:00/40 tag 5 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.505026] ata2.00: status: { DRDY }
    [ 2461.505378] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.505852] ata2.00: cmd 61/c0:30:a0:05:65/02:00:84:00:00/40 tag 6 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.507244] ata2.00: status: { DRDY }
    [ 2461.507572] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.508040] ata2.00: cmd 61/40:38:60:08:65/05:00:84:00:00/40 tag 7 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.509472] ata2.00: status: { DRDY }
    [ 2461.509808] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.510277] ata2.00: cmd 61/a0:40:a0:0d:65/02:00:84:00:00/40 tag 8 ncq dma 344064 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.511667] ata2.00: status: { DRDY }
    [ 2461.511994] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.512461] ata2.00: cmd 61/40:48:00:20:66/05:00:84:00:00/40 tag 9 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.514503] ata2.00: status: { DRDY }
    [ 2461.514850] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.515322] ata2.00: cmd 61/40:50:00:28:66/05:00:84:00:00/40 tag 10 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.516721] ata2.00: status: { DRDY }
    [ 2461.517084] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.517562] ata2.00: cmd 61/c0:58:40:2d:66/02:00:84:00:00/40 tag 11 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.519253] ata2.00: status: { DRDY }
    [ 2461.519595] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.520066] ata2.00: cmd 61/40:60:f8:9e:64/05:00:84:00:00/40 tag 12 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.521504] ata2.00: status: { DRDY }
    [ 2461.521840] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.522309] ata2.00: cmd 61/c0:68:38:a4:64/02:00:84:00:00/40 tag 13 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.523706] ata2.00: status: { DRDY }
    [ 2461.524033] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.524501] ata2.00: cmd 61/40:70:f8:af:64/05:00:84:00:00/40 tag 14 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.525925] ata2.00: status: { DRDY }
    [ 2461.526256] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.526725] ata2.00: cmd 61/c0:78:38:b5:64/02:00:84:00:00/40 tag 15 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.528122] ata2.00: status: { DRDY }
    [ 2461.528449] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.528939] ata2.00: cmd 61/40:80:f8:b7:64/05:00:84:00:00/40 tag 16 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.530339] ata2.00: status: { DRDY }
    [ 2461.530667] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.531136] ata2.00: cmd 61/c0:88:38:bd:64/02:00:84:00:00/40 tag 17 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.532532] ata2.00: status: { DRDY }
    [ 2461.532880] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.533357] ata2.00: cmd 61/40:90:f8:bf:64/05:00:84:00:00/40 tag 18 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.534754] ata2.00: status: { DRDY }
    [ 2461.535081] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.535549] ata2.00: cmd 61/c0:98:38:c5:64/02:00:84:00:00/40 tag 19 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.536970] ata2.00: status: { DRDY }
    [ 2461.537301] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.537769] ata2.00: cmd 61/40:a0:f8:c7:64/05:00:84:00:00/40 tag 20 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.539165] ata2.00: status: { DRDY }
    [ 2461.539491] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.539960] ata2.00: cmd 61/c0:a8:38:cd:64/02:00:84:00:00/40 tag 21 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.541381] ata2.00: status: { DRDY }
    [ 2461.541713] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.542182] ata2.00: cmd 61/40:b0:f8:cf:64/05:00:84:00:00/40 tag 22 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.543577] ata2.00: status: { DRDY }
    [ 2461.543905] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.544374] ata2.00: cmd 61/40:b8:f8:d7:64/05:00:84:00:00/40 tag 23 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.545790] ata2.00: status: { DRDY }
    [ 2461.546120] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.546589] ata2.00: cmd 61/c0:c0:38:dd:64/02:00:84:00:00/40 tag 24 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.547987] ata2.00: status: { DRDY }
    [ 2461.548314] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.548782] ata2.00: cmd 61/a8:c8:f8:df:64/05:00:84:00:00/40 tag 25 ncq dma 741376 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.550198] ata2.00: status: { DRDY }
    [ 2461.550530] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.550999] ata2.00: cmd 61/c0:d0:a0:e5:64/02:00:84:00:00/40 tag 26 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.552396] ata2.00: status: { DRDY }
    [ 2461.552723] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.553208] ata2.00: cmd 61/40:d8:60:e8:64/05:00:84:00:00/40 tag 27 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.554607] ata2.00: status: { DRDY }
    [ 2461.554935] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.555404] ata2.00: cmd 61/c0:e0:a0:ed:64/02:00:84:00:00/40 tag 28 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.556800] ata2.00: status: { DRDY }
    [ 2461.557145] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.557617] ata2.00: cmd 61/40:e8:60:f0:64/05:00:84:00:00/40 tag 29 ncq dma 688128 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.559012] ata2.00: status: { DRDY }
    [ 2461.559340] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.559807] ata2.00: cmd 61/c0:f0:38:d5:64/02:00:84:00:00/40 tag 30 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.561221] ata2.00: status: { DRDY }
    [ 2461.561552] ata2.00: failed command: WRITE FPDMA QUEUED
    [ 2461.562021] ata2.00: cmd 61/c0:f8:40:25:66/02:00:84:00:00/40 tag 31 ncq dma 360448 out
                            res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
    [ 2461.563416] ata2.00: status: { DRDY }
    [ 2461.563752] ata2: hard resetting link
    [ 2471.561504] ata2: softreset failed (1st FIS failed)
    [ 2471.561959] ata2: hard resetting link
    [ 2481.560785] ata2: softreset failed (1st FIS failed)
    [ 2481.561238] ata2: hard resetting link
    [ 2516.561654] ata2: softreset failed (1st FIS failed)
    [ 2516.562109] ata2: limiting SATA link speed to 3.0 Gbps
    [ 2516.562113] ata2: hard resetting link
    [ 2521.561261] ata2: softreset failed (1st FIS failed)
    [ 2521.561715] ata2: reset failed, giving up
    [ 2521.562074] ata2.00: disabled
    [ 2521.562575] ata2: EH complete
    [ 2521.562677] sd 1:0:0:0: [sdb] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2521.562686] sd 1:0:0:0: [sdb] tag#18 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
    [ 2521.562701] print_req_error: I/O error, dev sdb, sector 0
    [ 2521.562791] sd 1:0:0:0: [sdb] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2521.562802] sd 1:0:0:0: [sdb] tag#19 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2521.562873] sd 1:0:0:0: [sdb] tag#19 CDB: opcode=0x2a 2a 00 84 66 25 40 00 02 c0 00
    [ 2521.562888] print_req_error: I/O error, dev sdb, sector 2221286720
    [ 2521.563107] sd 1:0:0:0: [sdb] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2521.563126] sd 1:0:0:0: [sdb] tag#21 CDB: opcode=0x2a 2a 00 84 64 f0 60 00 05 40 00
    [ 2521.563138] print_req_error: I/O error, dev sdb, sector 2221207648
    [ 2521.563422] sd 1:0:0:0: [sdb] tag#22 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2521.563772] sd 1:0:0:0: [sdb] tag#20 CDB: opcode=0x2a 2a 00 84 64 d5 38 00 02 c0 00
    [ 2521.564326] print_req_error: I/O error, dev sdb, sector 2221200696
    [ 2521.564337] sd 1:0:0:0: [sdb] tag#22 CDB: opcode=0x2a 2a 00 84 64 ed a0 00 02 c0 00
    [ 2521.564896] print_req_error: I/O error, dev sdb, sector 2221206944
    [ 2521.565088] sd 1:0:0:0: [sdb] tag#26 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2521.565469] sd 1:0:0:0: [sdb] tag#26 CDB: opcode=0x2a 2a 00 84 64 dd 38 00 02 c0 00
    [ 2521.565483] print_req_error: I/O error, dev sdb, sector 2221202744
    [ 2521.565610] sd 1:0:0:0: [sdb] tag#23 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2521.566056] sd 1:0:0:0: [sdb] tag#23 CDB: opcode=0x2a 2a 00 84 64 e8 60 00 05 40 00
    [ 2521.566069] print_req_error: I/O error, dev sdb, sector 2221205600
    [ 2521.566183] sd 1:0:0:0: [sdb] tag#29 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2521.566641] sd 1:0:0:0: [sdb] tag#29 CDB: opcode=0x2a 2a 00 84 64 cd 38 00 02 c0 00
    [ 2521.566654] print_req_error: I/O error, dev sdb, sector 2221198648
    [ 2521.566954] sd 1:0:0:0: [sdb] tag#24 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2521.567224] sd 1:0:0:0: [sdb] tag#24 CDB: opcode=0x2a 2a 00 84 64 e5 a0 00 02 c0 00
    [ 2521.567237] print_req_error: I/O error, dev sdb, sector 2221204896
    [ 2521.567459] sd 1:0:0:0: [sdb] tag#30 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2521.567809] sd 1:0:0:0: [sdb] tag#30 CDB: opcode=0x2a 2a 00 84 64 c7 f8 00 05 40 00
    [ 2521.567821] print_req_error: I/O error, dev sdb, sector 2221197304
    [ 2521.584903] md: super_written gets error=10
    [ 2521.585306] md/raid1:md0: Disk failure on dm-1, disabling device.
                   md/raid1:md0: Operation continuing on 1 devices.
    [ 2526.581450] scsi_io_completion_action: 41779 callbacks suppressed
    [ 2526.581461] sd 1:0:0:0: [sdb] tag#27 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2526.581467] sd 1:0:0:0: [sdb] tag#27 CDB: opcode=0x2a 2a 00 84 66 7d 50 00 00 01 00
    [ 2526.581469] print_req_error: 41780 callbacks suppressed
    [ 2526.581471] print_req_error: I/O error, dev sdb, sector 2221309264
    [ 2526.582524] sd 1:0:0:0: [sdb] tag#28 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2526.582530] sd 1:0:0:0: [sdb] tag#28 CDB: opcode=0x2a 2a 00 84 66 7d 51 00 00 01 00
    [ 2526.582534] print_req_error: I/O error, dev sdb, sector 2221309265
    [ 2526.583366] sd 1:0:0:0: [sdb] tag#29 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2526.583370] sd 1:0:0:0: [sdb] tag#29 CDB: opcode=0x2a 2a 00 84 66 7d 52 00 00 01 00
    [ 2526.583373] print_req_error: I/O error, dev sdb, sector 2221309266
    [ 2526.584113] sd 1:0:0:0: [sdb] tag#30 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2526.584117] sd 1:0:0:0: [sdb] tag#30 CDB: opcode=0x2a 2a 00 84 66 7d 53 00 00 01 00
    [ 2526.584119] print_req_error: I/O error, dev sdb, sector 2221309267
    [ 2526.584960] sd 1:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2526.584968] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 84 66 7d 54 00 00 01 00
    [ 2526.584971] print_req_error: I/O error, dev sdb, sector 2221309268
    [ 2526.585765] sd 1:0:0:0: [sdb] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2526.585769] sd 1:0:0:0: [sdb] tag#1 CDB: opcode=0x2a 2a 00 84 66 7d 55 00 00 01 00
    [ 2526.585772] print_req_error: I/O error, dev sdb, sector 2221309269
    [ 2526.586461] sd 1:0:0:0: [sdb] tag#2 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2526.586465] sd 1:0:0:0: [sdb] tag#2 CDB: opcode=0x2a 2a 00 84 66 7d 56 00 00 01 00
    [ 2526.586468] print_req_error: I/O error, dev sdb, sector 2221309270
    [ 2526.587144] sd 1:0:0:0: [sdb] tag#3 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2526.587148] sd 1:0:0:0: [sdb] tag#3 CDB: opcode=0x2a 2a 00 84 66 7d 57 00 00 01 00
    [ 2526.587150] print_req_error: I/O error, dev sdb, sector 2221309271
    [ 2526.587734] sd 1:0:0:0: [sdb] tag#4 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2526.587737] sd 1:0:0:0: [sdb] tag#4 CDB: opcode=0x2a 2a 00 84 66 7d 58 00 00 01 00
    [ 2526.587739] print_req_error: I/O error, dev sdb, sector 2221309272
    [ 2526.588320] sd 1:0:0:0: [sdb] tag#5 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    [ 2526.588323] sd 1:0:0:0: [sdb] tag#5 CDB: opcode=0x2a 2a 00 84 66 7d 59 00 00 01 00
    [ 2526.588325] print_req_error: I/O error, dev sdb, sector 2221309273
    

    Und, wieder eine Platte im Raid1 verloren

    rock64@rockpro64v_2_1:~$ cat /proc/mdstat
    Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] 
    md0 : active raid1 dm-1[2](F) dm-0[1]
          1953379392 blocks super 1.2 [2/1] [_U]
          bitmap: 5/15 pages [20KB], 65536KB chunk
    
    unused devices: <none>
    

    Leider habe ich nicht die Kenntnisse um zu erkennen, woran das liegt.

  • 0 Stimmen
    3 Beiträge
    388 Aufrufe
    FrankMF

    Gestern mal das Ganze mit einem Cinnamon Desktop ausprobiert. Eine verschlüsselte Installation auf eine PCIe NVMe SSD. So weit lief das alles reibungslos. Der Cinnamon Desktop hat dann leider keine 3D Unterstützung. Sieht so aus, als wenn keine vernünftigen Grafiktreiber genutzt würden. Da ich auf diesem Gebiet aber eine Null bin, lassen wir das mal so. Außerdem mag ich sowieso keine Desktops auf diesen kleinen SBC. Da fehlt mir einfach der Dampf 😉

    Gut, was ist mir so aufgefallen?

    Unbedingt die Daten des Daily Images erneuern, keine alten Images nutzen. Ich hatte da jetzt ein paar Mal Schwierigkeiten mit. Da das ja nun keine Arbeit ist, vorher einfach neu runterladen und Image bauen.

    Warum zum Henker bootet eigentlich. außer meiner Samsung T5, nichts vom USB3 oder USB-C Port?? 👿

  • 0 Stimmen
    17 Beiträge
    1k Aufrufe
    FrankMF

    Durch diesen Beitrag ist mir mal wieder eingefallen, das wir das erneut testen könnten 😉

    Also die aktuellen Daten von Debian gezogen. Das Image gebaut, könnt ihr alles hier im ersten Beitrag nachlesen. Da die eingebaute Netzwerkschnittstelle nicht erkannt wurde, habe ich mal wieder den USB-to-LAN Adapter eingesetzt.

    Bus 005 Device 002: ID 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet

    Die Installation wollte ich auf einem NVMe Riegel installieren.

    Die Debian Installation durchgezogen und nach erfolgreicher Installation neugestartet. Und siehe da, ohne das man alles möglich ändern musste, bootete die NVMe SSD 🤓

    Eingesetzter uboot -> 2020.01-ayufan-2013......

    Die nicht erkannte LAN-Schnittstelle müsste an nicht freien Treibern liegen, hatte ich da irgendwo kurz gelesen. Beim Schreiben dieses Satzes kam die Nacht und ich konnte noch mal drüber schlafen. Heute Morgen, beim ersten Kaffee, dann noch mal logischer an die Sache ran gegangen.

    Wir schauen uns mal die wichtigsten Dinge an.

    root@debian:~# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 62:03:b0:d6:dc:b3 brd ff:ff:ff:ff:ff:ff 3: enx000acd26e2c8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:0a:cd:26:e2:c8 brd ff:ff:ff:ff:ff:ff inet 192.168.3.208/24 brd 192.168.3.255 scope global dynamic enx000acd26e2c8 valid_lft 42567sec preferred_lft 42567sec inet6 fd8a:6ff:2880:0:20a:cdff:fe26:e2c8/64 scope global dynamic mngtmpaddr valid_lft forever preferred_lft forever inet6 2a02:908:1260:13bc:20a:xxxx:xxxx:xxxx/64 scope global dynamic mngtmpaddr valid_lft 5426sec preferred_lft 1826sec inet6 fe80::20a:cdff:fe26:e2c8/64 scope link valid_lft forever preferred_lft forever

    Ok, er zeigt mir die Schnittstelle eth0 ja an, dann kann es an fehlenden Treibern ja nicht liegen. Lässt dann auf eine fehlerhafte Konfiguration schließen. Nächster Halt wäre dann /etc/network/interfaces

    Das trägt Debian ein

    # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug enx000acd26e2c8 iface enx000acd26e2c8 inet dhcp # This is an autoconfigured IPv6 interface iface enx000acd26e2c8 inet6 auto

    Gut, bei der Installation hat Debian ja nur die zusätzliche Netzwerkschnittstelle erkannt, folgerichtig ist die auch als primäre Schnittstelle eingetragen. Dann ändern wir das mal...

    # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback # The primary network interface #allow-hotplug enx000acd26e2c8 allow-hotplug eth0 #iface enx000acd26e2c8 inet dhcp iface eth0 inet dhcp # This is an autoconfigured IPv6 interface #iface enx000acd26e2c8 inet6 auto iface eth0 inet6 auto

    Danach einmal alles neu starten bitte 😉

    systemctl status networking

    Da fehlte mir aber jetzt die IPv4 Adresse, so das ich einmal komplett neugestartet habe. Der Ordnung halber, so hätte man die IPv4 Adresse bekommen.

    dhclient eth0

    Nachdem Neustart kam dann das

    root@debian:/etc/network# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 62:03:b0:d6:dc:b3 brd ff:ff:ff:ff:ff:ff inet 192.168.3.172/24 brd 192.168.3.255 scope global dynamic eth0 valid_lft 42452sec preferred_lft 42452sec inet6 fd8a:6ff:2880:0:6003:b0ff:fed6:dcb3/64 scope global dynamic mngtmpaddr valid_lft forever preferred_lft forever inet6 2a02:908:1260:13bc:6003:xxxx:xxxx:xxxx/64 scope global dynamic mngtmpaddr valid_lft 5667sec preferred_lft 2067sec inet6 fe80::6003:b0ff:fed6:dcb3/64 scope link valid_lft forever preferred_lft forever 3: enx000acd26e2c8: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:0a:cd:26:e2:c8 brd ff:ff:ff:ff:ff:ff

    Fertig, eth0 läuft. Nun kann man den zusätzlichen Adapter entfernen oder halt konfigurieren, wenn man ihn braucht.

    Warum der Debian Installer die eth0 nicht erkennt verstehe ich nicht, aber vielleicht wird das irgendwann auch noch gefixt. Jetzt habe ich erst mal einen Workaround um eine Installation auf den ROCKPro64 zu bekommen.

  • 1 Stimmen
    13 Beiträge
    1k Aufrufe
    FrankMF

    Ich möchte das dann hier zum Abschluss bringen, das NAS ist heute zusammengebaut worden. Hier zwei Fotos.

    IMG_20200425_102156_ergebnis.jpg

    IMG_20200425_102206_ergebnis.jpg

  • Image 0.9.14 - Kurztest

    ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    216 Aufrufe
    Niemand hat geantwortet
  • NVMe SSD Speed auf Kernel 5.0 von Kamil

    Verschoben ROCKPro64
    11
    0 Stimmen
    11 Beiträge
    864 Aufrufe
    W

    @FrankM sagte in NVMe SSD Speed auf Kernel 5.0 von Kamil:

    Kurz was zum Nanopc-t4, das war das Board, wo ich damals schon geschrieben habe, wie man da die Wärme weg bekommt!? Ok, bleiben wir beim ROCKPro64 😉

    Hmm .. nix dazu im Forum bei dir gefunden .. nach wärme , nano usw. gesucht ..

    Den Teil verstehe ich nicht. Woher soll er denn das 0.7er Image laden???

    Von seiner SD .. ein bisschen wirr von mir beschrieben.

    Nackter Rockpro, ohne USB-Devices, ohne NVMe, ohne emmc, ..

    Ablauf 1:
    SD Karte mit 0.7er Image (das bisher immer funktioniert hatte) rein -> Rockpro geht an, beide LEDs gehen an (was aber bisher nur die weisse war), kein weiterer Boot-Vorgang.

    Ablauf 2:
    SD Karte mit 0.8er Image (gleiche SD Karte) rein -> Rockpro geht an, perfekter Boot Vorgang.

    Das Monitor "Problem" und das 0.7er scheinen hier ggf. zusammen zu hängen, jedoch - mehr debugging nur mit der RS232 möglich, ggf. Mist im First-Stage-Loader ..

    (Erase SPI , etc. alles hatte nichts verändert ..)

    Wenn jemand richtig Zeit und Lust hätte könnte man sich ja am Armbian nand-sata Script orientieren:

    Da habe ich auch schon mal drüber nachgedacht....

    Ich würde 5$ Patreon Money dazu geben 🙂

    Einen schönen Sonntag.

  • Video PCIe SATA Karte

    ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    504 Aufrufe
    Niemand hat geantwortet
  • 0 Stimmen
    3 Beiträge
    1k Aufrufe
    FrankMF

    Ein paar Hardware Änderungen

    Weiße LED gedimmt

    0_1532529766212_IMG_20180725_151430_ergebnis.jpg

    Neue LED grün, neben dem Eingang der Stromversorgung

    0_1532529863801_IMG_20180725_151421_geändert.jpg

  • stretch-minimal-rockpro64

    Verschoben Linux
    3
    0 Stimmen
    3 Beiträge
    979 Aufrufe
    FrankMF

    Mal ein Test was der Speicher so kann.

    rock64@rockpro64:~/tinymembench$ ./tinymembench tinymembench v0.4.9 (simple benchmark for memory throughput and latency) ========================================================================== == Memory bandwidth tests == == == == Note 1: 1MB = 1000000 bytes == == Note 2: Results for 'copy' tests show how many bytes can be == == copied per second (adding together read and writen == == bytes would have provided twice higher numbers) == == Note 3: 2-pass copy means that we are using a small temporary buffer == == to first fetch data into it, and only then write it to the == == destination (source -> L1 cache, L1 cache -> destination) == == Note 4: If sample standard deviation exceeds 0.1%, it is shown in == == brackets == ========================================================================== C copy backwards : 2812.7 MB/s C copy backwards (32 byte blocks) : 2811.9 MB/s C copy backwards (64 byte blocks) : 2632.8 MB/s C copy : 2667.2 MB/s C copy prefetched (32 bytes step) : 2633.5 MB/s C copy prefetched (64 bytes step) : 2640.8 MB/s C 2-pass copy : 2509.8 MB/s C 2-pass copy prefetched (32 bytes step) : 2431.6 MB/s C 2-pass copy prefetched (64 bytes step) : 2424.1 MB/s C fill : 4887.7 MB/s (0.5%) C fill (shuffle within 16 byte blocks) : 4883.0 MB/s C fill (shuffle within 32 byte blocks) : 4889.3 MB/s C fill (shuffle within 64 byte blocks) : 4889.2 MB/s --- standard memcpy : 2807.3 MB/s standard memset : 4890.4 MB/s (0.3%) --- NEON LDP/STP copy : 2803.7 MB/s NEON LDP/STP copy pldl2strm (32 bytes step) : 2802.1 MB/s NEON LDP/STP copy pldl2strm (64 bytes step) : 2800.7 MB/s NEON LDP/STP copy pldl1keep (32 bytes step) : 2745.5 MB/s NEON LDP/STP copy pldl1keep (64 bytes step) : 2745.8 MB/s NEON LD1/ST1 copy : 2801.9 MB/s NEON STP fill : 4888.9 MB/s (0.3%) NEON STNP fill : 4850.1 MB/s ARM LDP/STP copy : 2803.8 MB/s ARM STP fill : 4893.0 MB/s (0.5%) ARM STNP fill : 4851.7 MB/s ========================================================================== == Framebuffer read tests. == == == == Many ARM devices use a part of the system memory as the framebuffer, == == typically mapped as uncached but with write-combining enabled. == == Writes to such framebuffers are quite fast, but reads are much == == slower and very sensitive to the alignment and the selection of == == CPU instructions which are used for accessing memory. == == == == Many x86 systems allocate the framebuffer in the GPU memory, == == accessible for the CPU via a relatively slow PCI-E bus. Moreover, == == PCI-E is asymmetric and handles reads a lot worse than writes. == == == == If uncached framebuffer reads are reasonably fast (at least 100 MB/s == == or preferably >300 MB/s), then using the shadow framebuffer layer == == is not necessary in Xorg DDX drivers, resulting in a nice overall == == performance improvement. For example, the xf86-video-fbturbo DDX == == uses this trick. == ========================================================================== NEON LDP/STP copy (from framebuffer) : 602.5 MB/s NEON LDP/STP 2-pass copy (from framebuffer) : 551.6 MB/s NEON LD1/ST1 copy (from framebuffer) : 667.1 MB/s NEON LD1/ST1 2-pass copy (from framebuffer) : 605.6 MB/s ARM LDP/STP copy (from framebuffer) : 445.3 MB/s ARM LDP/STP 2-pass copy (from framebuffer) : 428.8 MB/s ========================================================================== == Memory latency test == == == == Average time is measured for random memory accesses in the buffers == == of different sizes. The larger is the buffer, the more significant == == are relative contributions of TLB, L1/L2 cache misses and SDRAM == == accesses. For extremely large buffer sizes we are expecting to see == == page table walk with several requests to SDRAM for almost every == == memory access (though 64MiB is not nearly large enough to experience == == this effect to its fullest). == == == == Note 1: All the numbers are representing extra time, which needs to == == be added to L1 cache latency. The cycle timings for L1 cache == == latency can be usually found in the processor documentation. == == Note 2: Dual random read means that we are simultaneously performing == == two independent memory accesses at a time. In the case if == == the memory subsystem can't handle multiple outstanding == == requests, dual random read has the same timings as two == == single reads performed one after another. == ========================================================================== block size : single random read / dual random read 1024 : 0.0 ns / 0.0 ns 2048 : 0.0 ns / 0.0 ns 4096 : 0.0 ns / 0.0 ns 8192 : 0.0 ns / 0.0 ns 16384 : 0.0 ns / 0.0 ns 32768 : 0.0 ns / 0.0 ns 65536 : 4.5 ns / 7.2 ns 131072 : 6.8 ns / 9.7 ns 262144 : 9.8 ns / 12.8 ns 524288 : 11.4 ns / 14.7 ns 1048576 : 16.0 ns / 22.6 ns 2097152 : 114.0 ns / 175.3 ns 4194304 : 161.7 ns / 219.9 ns 8388608 : 190.7 ns / 241.5 ns 16777216 : 205.3 ns / 250.5 ns 33554432 : 212.9 ns / 255.5 ns 67108864 : 222.3 ns / 271.1 ns