Skip to content

Images 0.10.x

Angeheftet Images
  • 0.10.2: gitlab-ci-linux-build-170 released

    HIGHLY EXPERIMENTAL AND NOT WORKING!!!
    THIS RELEASE HAS BROKEN BOOT

    Quelle: https://github.com/ayufan-rock64/linux-build/releases/

    Nein, man kann noch nichts nutzen! 🙂

  • 0.10.3: gitlab-ci-linux-build-171 released

    • HIGHLY EXPERIMENTAL AND NOT WORKING!!!

    • PRE-RELEASE: unstable and should be only used for testing purposes

      • 0.10.3: Hopefully OMV will compile,
      • 0.10.3: ADd SPI boot on RockPro64
      • 0.10.3: Add NVME/SATA boot on RockPro64
      • 0.10.2: Update partition scheme to use /boot/efi, /boot and /
      • 0.10.2: Configure /etc/fstab with all partitions
      • 0.10.2: Compile buster/containers instead of focal/containers

    Das sollte jetzt auch auf einigen Geräten booten. Aber heute wird nichts mehr getestet - Feierabend! 🙂

  • 0.10.6: gitlab-ci-linux-build-174 released

    • 0.10.6: Maybe build OMV5
    • 0.10.6: Use u-boot instead of u-boot-rockchip
    • 0.10.6: Fix focal/armhf build
    • 0.10.5: Revert systemd-networkd change
    • 0.10.5: Maybe support USB3 boot on Rock64
    • 0.10.5: Maybe build OMV5
  • 0.10.7: gitlab-ci-linux-build-175 released

    • 0.10.7: Maybe Pinebook Pro will work, thanks Manjaro 🙂
    • 0.10.7: Maybe Desktop will boot
    • 0.10.7: Maybe OMV5 will run
    • 0.10.7: Maybe gl4es will work
  • 0.10.7 ist im Moment nicht funktional. Nach dem Boot ist keine eth0 Schnittstelle vorhanden.

  • 0.10.8: gitlab-ci-linux-build-177 released

    • 0.10.8: Make rootfs sticky
    • 0.10.8: Update sizes of images
    • 0.10.8: Enable by default C.UTF-8 and en_US.UTF-8 and use dpkg-reconfigure locales
    • 0.10.8: Run update-command-not-found
    • 0.10.8: Better handle /etc/resolv.conf (do not remove it, if it become system controlled)
    • 0.10.8: Load dptx.alt.bin to make it possible to ship also on buster

    Viele neue Images

    • Ubuntu Focal LXDE
    • Ubuntu Focal Mate
    • Ubuntu Focal Minimum
    • Debian Buster OMV

    Viele Sachen zum Testen 🙂

  • 0.10.9 - 0.10.9: gitlab-ci-linux-build-180 released

    • 0.10.9: Shrink created images to reduce write time
    • 0.10.9: Enable work/diy LEDs on boot for RockPro64/PinebookPro
    • 0.10.9: Fix excessive log messages on OMV5
    • 0.10.8: Make rootfs sticky
    • 0.10.8: Update sizes of images
  • 0.10.10: gitlab-ci-linux-build-181 released

    • 0.10.10: Do not compile OMV5 for armhf, only arm64
    • 0.10.10: Fix fstab issue introduced in 0.10.9
    • 0.10.10: Do more cleanups during image creation to reduce size
    • 0.10.10: Enable u-boot HDMI output for RockPro64
    • 0.10.10: Support HDMI modeline with pclck 32MHz (ie. 1024x600@43)
    • 0.10.10: Support automated resize when booting from nvme
  • 0.10.11: gitlab-ci-linux-build-183 released

    • 0.10.11: Support wifi/bt on Pinebook Pro
    • 0.10.11: Add install_kernel script
    • 0.10.11: Fix support for rockchip/dptx.bin
    • 0.10.11: Try Gnome, KDE, XFCE4 additionally to LXDE, Mate

    Neue Desktops werden auf Basis von Ubuntu Focal unterstützt.

    • KDE
    • XFCE4
    • Gnome

    Mal gespannt, was davon rund läuft 😉 Kann leider jetzt nichts testen, meine Testmaschine ist mit einem Raid Resync beschäftigt. OK, dann die Tage..

  • 0.10.12: gitlab-ci-linux-build-184 released

    • 0.10.12: Be strict on any qemu failures
    • 0.10.12: Build by default mate/lxde/gnome/xfce4
    • 0.10.12: Add pcie scan delay from @nuumio
    • 0.10.12: Add ubuntu-mate-lightdm-theme where possible

    Ich komme gar nicht mehr mit dem Testen hinterher 🙂

  • ROCKPro64 - Secondary IP entfernen

    ROCKPro64
    5
    0 Stimmen
    5 Beiträge
    608 Aufrufe
    FrankMF

    Hallo @mabs,

    es ging bei meinem Post gar nicht um den dhcpd, also den Daemon der die Adressen verteilt. Hintergrund, ich versuche gerade mal wieder einen Router auf Basis eines ROCKPro64 zu bauen. Dabei bin ich in Kamils Debian Minimal über die zweite IP-Adresse gestolpert.

    Danke aber für deine Anregungen.

    Es gibt da aber wohl mit dem Debian Minimal irgendwelche Probleme mit dem Forwarding, so das ich das jetzt auf einem Bionic mache, dort klappt das einwandfrei. Aber dazu später ausführlich in einem anderen Thread.

  • Desktop Image - endlich nutzbar??

    Images
    3
    0 Stimmen
    3 Beiträge
    318 Aufrufe
    FrankMF

    Bitte zum Thema WiFi & PCIe zusammen unbedingt hier mal reinschauen. Es gibt da interessante Neuigkeiten.

  • ROCKPro64 Übersicht - was geht?

    ROCKPro64
    4
    0 Stimmen
    4 Beiträge
    587 Aufrufe
    FrankMF
    WIFI

    Seit dem Release des Images 0.7.13 ist WiFi auch möglich. Weiterhin ungelöst ist das Problem PCIe & WiFi (also bei mir).

  • 0 Stimmen
    2 Beiträge
    706 Aufrufe
    FrankMF

    Neue Artikel im Pine64 Shop

    ABS Gehäuse https://www.pine64.org/?product=rockpro64-abs-enclosure Gehäuse für einen ROCKPro64 und einen LCD-Bildschirm https://www.pine64.org/?product=rockpro64-playbox-enclosure
  • Images 0.7.x

    Images
    22
    0 Stimmen
    22 Beiträge
    3k Aufrufe
    FrankMF

    Ayufan Images nutzen

    user: rock64 pw: rock64
  • DTS DTB Files bearbeiten

    Angeheftet ROCKPro64
    3
    0 Stimmen
    3 Beiträge
    1k Aufrufe
    FrankMF

    Oder, ganz einfach

    sudo dtedit

    🙂

  • Wichtig!

    Verschoben Archiv
    1
    0 Stimmen
    1 Beiträge
    724 Aufrufe
    Niemand hat geantwortet
  • Images 0.6.x

    Verschoben Images
    30
    0 Stimmen
    30 Beiträge
    6k Aufrufe
    FrankMF

    0.6.60 released

    0.6.60: Fix pcie/nvme/sata support for 4.4, 0.6.60: Fix spi-flash access for 4.4/mainline,

    Ich bin davon ausgegangen, das 0.6.x nict mehr fortgeführt wird, okay - sieht nicht so aus.

    Sollte released werden, ist aber aus irgendeinem Grund gestern nicht passiert (lt. Kamil)