Skip to content

Projekt NAS - BIOS Update 1.25.0

Linux
  • Heute ist Update-Tag 😉 Das BIOS von meinem NAS mal auf Vordermann gebracht. Dazu auch direkt den neuen Kernel installiert, einmal durchgestartet - läuft.

    0_1522656435202_IMG_20180402_095717.jpg

    uname -a
    Linux nas 4.9.0-6-amd64 #1 SMP Debian 4.9.82-1+deb9u3 (2018-03-02) x86_64 GNU/Linux
    

    Und eben gesehen, das das NAS schon seit Oktober 2016 läuft. (24/7) Gute Investition, bin absolut zufrieden damit.

  • Linux security update [DSA 5658-1]

    Linux
    1
    0 Stimmen
    1 Beiträge
    185 Aufrufe
    Niemand hat geantwortet
  • Update 1.30.2 released

    Vaultwarden
    1
    0 Stimmen
    1 Beiträge
    71 Aufrufe
    Niemand hat geantwortet
  • ASRock N100DC-ITX

    Angeheftet Linux
    2
    0 Stimmen
    2 Beiträge
    2k Aufrufe
    FrankMF
    NVMe

    Die NVMe (Crucial P3 mit 500GB) ist, wenn ich das richtig verstehe, nur mit zwei Lanes an die CPU angebunden. Das macht dann

    root@asrock:~# dd if=/dev/zero of=test.img bs=1M count=4096 conv=fdatasync 4096+0 records in 4096+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 3.9673 s, 1.1 GB/s Frequenzen root@asrock:/sys/devices/system/cpu/cpu0/cpufreq# cat cpuinfo_min_freq 700000 root@asrock:/sys/devices/system/cpu/cpu0/cpufreq# cat cpuinfo_max_freq 3400000

    Aktuelle cpufreq

    analyzing CPU 3: driver: intel_pstate CPUs which run at the same hardware frequency: 3 CPUs which need to have their frequency coordinated by software: 3 maximum transition latency: 4294.55 ms. hardware limits: 700 MHz - 3.40 GHz available cpufreq governors: performance, powersave current policy: frequency should be within 700 MHz and 3.40 GHz. The governor "performance" may decide which speed to use within this range. current CPU frequency is 800 MHz.

    oder auch

    analyzing CPU 3: driver: intel_pstate CPUs which run at the same hardware frequency: 3 CPUs which need to have their frequency coordinated by software: 3 maximum transition latency: 4294.55 ms. hardware limits: 700 MHz - 3.40 GHz available cpufreq governors: performance, powersave current policy: frequency should be within 700 MHz and 3.40 GHz. The governor "performance" may decide which speed to use within this range. current CPU frequency is 1.63 GHz. iperf3 root@asrock:/sys/devices/system/cpu/cpu0/cpufreq# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.3.213, port 50746 [ 5] local 192.168.4.7 port 5201 connected to 192.168.3.213 port 50750 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 112 MBytes 938 Mbits/sec [ 5] 1.00-2.00 sec 112 MBytes 941 Mbits/sec [ 5] 2.00-3.00 sec 112 MBytes 942 Mbits/sec [ 5] 3.00-4.00 sec 112 MBytes 940 Mbits/sec [ 5] 4.00-5.00 sec 112 MBytes 941 Mbits/sec [ 5] 5.00-6.00 sec 112 MBytes 941 Mbits/sec [ 5] 6.00-7.00 sec 112 MBytes 941 Mbits/sec [ 5] 7.00-8.00 sec 112 MBytes 941 Mbits/sec [ 5] 8.00-9.00 sec 112 MBytes 941 Mbits/sec [ 5] 9.00-10.00 sec 112 MBytes 939 Mbits/sec [ 5] 10.00-10.01 sec 547 KBytes 885 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.01 sec 1.10 GBytes 941 Mbits/sec receiver ----------------------------------------------------------- Server listening on 5201 (test #2) ----------------------------------------------------------- Accepted connection from 192.168.3.213, port 33692 [ 5] local 192.168.4.7 port 5201 connected to 192.168.3.213 port 33694 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 114 MBytes 959 Mbits/sec 0 600 KBytes [ 5] 1.00-2.00 sec 112 MBytes 939 Mbits/sec 0 628 KBytes [ 5] 2.00-3.00 sec 113 MBytes 948 Mbits/sec 0 659 KBytes [ 5] 3.00-4.00 sec 111 MBytes 933 Mbits/sec 0 768 KBytes [ 5] 4.00-5.00 sec 112 MBytes 944 Mbits/sec 0 768 KBytes [ 5] 5.00-6.00 sec 112 MBytes 944 Mbits/sec 0 768 KBytes [ 5] 6.00-7.00 sec 112 MBytes 944 Mbits/sec 0 768 KBytes [ 5] 7.00-8.00 sec 112 MBytes 944 Mbits/sec 0 768 KBytes [ 5] 8.00-9.00 sec 111 MBytes 933 Mbits/sec 0 823 KBytes [ 5] 9.00-10.00 sec 112 MBytes 944 Mbits/sec 0 823 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.10 GBytes 943 Mbits/sec 0 sender
  • ASRock N100M

    Linux
    9
    0 Stimmen
    9 Beiträge
    1k Aufrufe
    FrankMF

    Angekommen 🙂 Jetzt noch den Umzug vorbereiten und dann kann es losgehen. Aktuell ist es aber zu warm zum Basteln..

    20230711_164434_ergebnis.jpg

  • Manjaro Stable-Update vom 20.02.23

    Linux
    2
    0 Stimmen
    2 Beiträge
    90 Aufrufe
    FrankMF

    Ich konnte es nicht lassen, ich habe es mal getestet.

       ~  docker version  ✔  1m 37s  Client: Version: 23.0.1 API version: 1.42 Go version: go1.20 Git commit: a5ee5b1dfc Built: Sat Feb 11 13:58:04 2023 OS/Arch: linux/amd64 Context: default

    In der aktuellen systemd Datei steht folgendes drin. Bei mir zu finden unter /usr/lib/systemd/system/docker.service

    LimitNOFILE=infinity LimitNPROC=infinity LimitCORE=infinity

    Die override Dateien angelegt und durchgestartet. Läuft alles einwandfrei. Aber bitte fragt mich nicht, was dieser Wert da oben macht. Ich habe keine Ahnung.

    Update: Erklärung zu ulimits https://stackoverflow.com/questions/62127643/need-understand-ulimits-nofile-setting-in-host-and-container

  • Node.js - Security Update

    Linux
    1
    0 Stimmen
    1 Beiträge
    197 Aufrufe
    Niemand hat geantwortet
  • NAS - Cups & Sane

    Linux
    1
    0 Stimmen
    1 Beiträge
    469 Aufrufe
    Niemand hat geantwortet
  • Restic - Beispielzeiten

    Restic
    1
    0 Stimmen
    1 Beiträge
    468 Aufrufe
    Niemand hat geantwortet