Skip to content

Images 0.7.x

Images
  • Kamil ist wieder am schrauben.

    0.7.x

    • 0.7.0: Introduces heavy refactor splitting all components into separate repos, and separate independent releases (u-boot, kernel, kernel-mainline, compatibility package),
    • 0.7.0: Dry run everything,

    Bin gespannt auf das Ergebnis, im Moment hat das Script mit Fehlern abgebrochen, aber Kamil kennt das bestens 😉

  • Es gibt noch nicht Neues, aber hier kann man schon ein wenig sehen was er macht.

    • 0.7.3: Speed-up build process,
    • 0.7.2: Pin packages,
    • 0.7.1: Use GitLab CI for releasing all images,
    • 0.7.0: Introduces heavy refactor splitting all components into separate repos, and separate independent releases (u-boot, kernel, kernel-mainline, compatibility package),

    LATEST_UBOOT_VERSION=2017.09-rockchip-ayufan-1009-g501b20dc14
    LATEST_KERNEL_VERSION=4.4.132-1042-rockchip-ayufan-g521c26bc8ee0
    LATEST_PACKAGE_VERSION=0.7-5

    Quelle: https://gitlab.com/ayufan-repos/rock64/linux-build/commit/b557556d38760cfd1f7e9a818e7a51c873520161

  • Wenn ich das jetzt richtig beobachtet habe, hat Kamil ganze zwei Tage damit zugebracht, den Build Prozeß umzubauen. Da läuft jetzt wohl alles auf gitlab ab, die Releases findet man aber immer noch hier. Was da wie, womit zusammen arbeitet, kann ich Euch nicht sagen. Bin auf dem Gebiet mit Sicherheit kein Experte. 😉

    Das Gute, es gibt einen neuen Release. 0.7.2

    Das Schlechte, bootet nicht, da scheint was mit dem u-boot nicht zu passen.

    Kamil schrieb

    (23:24:08) ayufan1: I will fix it later
    (23:24:15) ayufan1: I basically changed 80% of the build process 🙂
    (23:24:21) ayufan1: so I expect something not to work 😛

    Dann warten wir mal..

    und DANKE für die Arbeit - Kamil!!

  • Gestern Nacht kam noch 0.7.3

    • 0.7.3: Fix generation of extlinux.conf (linux booting),

    Das Problem des nicht Bootens wurde damit behoben, aber das Image ist unstabil. Kamil weiß das , ich bin sicher das er heute weiter dran rumschraubt.

    Dann mal dran erinnern was im Moment gut funktioniert.

    • 0.6.58: jenkins-linux-build-rock-64-271 installieren
    • und dann auf 4.18.0-rc3-1035-ayufan upgraden

    Die Releases werden übrigens weiterhin auf github veröffentlicht!

  • 0.7.3 released

    • 0.7.3: Fix generation of extlinux.conf (linux booting),
    • 0.7.2: Pin packages,
    • 0.7.2: Improve performance of build process,
    • 0.7.1: Use GitLab CI for releasing all images,
    • 0.7.0: Introduces heavy refactor splitting all components into separate repos, and separate independent releases (u-boot, kernel, kernel-mainline, compatibility package),
    • 0.7.0: Dry run everything,

    Kamil hat seinen kompletten Build-Prozeß umgebaut. Diese 0.7.3 Version bootet (nur ohne PCIe NVMe-Karte). Außerdem habe ich Unstabilitäten über die LAN-Schnittstelle bemerkt (Freeze). Nicht empfehlenswert, im Moment.

  • 0.7.4 released

    • 0.7.4: Fix resize_rootfs.sh script to respect boot flags (fixes second boot problem introduced by 0.7.0),
    • 0.7.4: Add rock(pro)64_erase_spi_flash.sh,
    • 0.7.4: Fix cursor on desktop for rockpro64,

    Bootet nur ohne PCIe NVMe Karte! Kamil will das Fixen.

  • 0.7.5 released

    • 0.7.5: Various stability fixes for kernel and u-boot,
    • 0.7.5: Added memtest to kernels and extlinux,
    • 0.7.5: Show early boot log when booting kernels,

    Kurzer Test - bootet jetzt mit PCIe NVMe Karte

  • 0.7.6 released

    • 0.7.6: Change OPP's for Rock64 and RockPro64: ayufan-rock64/linux-kernel@4.4.132-1059-rockchip-ayufan...ayufan-rock64:4.4.132-1062-rockchip-ayufan,

    Soll mehr Stabilität bringen, macht es leider nicht. So langsam wird es ärgerlich, das mit jedem Release nichts nach vorne geht.

  • 0.7.7 released

    • 0.7.7: Fix memory corruptions caused by Mali/Display subsystem (4.4),
    • 0.7.7: Enable SDR104 mode for SD cards (this requires u-boot upgrade if booting from SD),

    Langsam wird es, kann man jetzt zig mal booten ohne Probleme. Einziges Problem was ich im Moment nach einem kurzen Test festgestellt habe, das Erkennen der NVMe Karte ist Zufall und gelingt nur selten. Seltsamerweise im Mainline kein Problem!?

    Kamil hat das für 4.4 gefixt -> https://github.com/ayufan-rock64/linux-kernel/commit/bfb0d6c371d14b0d1fc60326b9bc84985a26f848?diff=unified

    Hier gibt es den Kernel zum herunter laden -> https://github.com/ayufan-rock64/linux-kernel/releases/tag/4.4.132-1070-rockchip-ayufan

  • 0.7.8 released ✌

    • 0.7.8: Improve eMMC compatibility on RockPro64,
    • 0.7.8: Disable sdio (no wifi/bt) to fix pcie/nvme support on 4.4 for RockPro64,
    • 0.7.8: Fix OMV builds (missing initrd.img),
    • 0.7.8: Make all packages virtual, conflicting and replacing making possible to do linux-rock64/rockpro64 to replace basesystem,

    (22:32:51) ayufan1: pushed one final release before vacations
    (22:32:59) ayufan1: consider this one to be the future release
    (22:33:15) ayufan1: if people do confirm that they do work on rockpro64 and rock64 I will make it finally stable 🙂
    (22:33:21) ayufan1: it is probably the best support so far
    (22:33:48) ayufan1: not yet the most performant (for rockpro64), I had to limit in bunch of places freqs, disable stuff, but it should be stable and support base ops
    (22:34:01) ayufan1: but, first stability, then we gonna add extra stuff

    Kamil macht Urlaub, da haben wir ja ein wenig Freizeit 🙂

  • 0.7.9 released

    • 0.7.9: Fix upgrade problem (u-boot-* packages),

    Kamil macht Urlaub 😂 Ok, es gab wohl ein paar kleinere Probleme die Platinen upzugraden. Kamil hat noch schnell die Probleme gefixt und das 0.7.9 Image veröffentlicht.

  • 0.7.10 released

    • 0.7.10: Rebased rockchip and mainline kernels,
    • 0.7.10: Support USB gadgets for rock/pro64,
    • 0.7.10: Disable TX checksumming for RockPro64,
    • 0.7.10: Improve FAN for RockPro64,
    • 0.7.10: Improve sdmmc0 stability for Rock64,
    • 0.7.10: Enable binfmt-misc,
    • 0.7.10: Improve stability of PCIE for RockPro64,
    • 0.7.10: Fix eMMC stability on RockPro64 mainline kernel,

    Die Container Images fehlen, Kamil hatte da ein Problem mit. Deshalb auch die Kennzeichnung als Pre-Release.

  • Die Container-Images für 0.7.10 sind jetzt auch fertig!

  • 0.7.11 released ✌

    • 0.7.11: Rebased mainline kernel,
    • 0.7.11: Run rockchip kernel at 250Hz to increase performance,
    • 0.7.11: Add support for usb gadgets for rockchip,
    • 0.7.11: Introduce change-default-kernel.sh script to easily switch between kernels,
  • 0.7.12 released

    • 0.7.12: Rebased mainline kernel,
    • 0.7.12: Rockchip kernel has patches for enabling sdio0 and pcie concurrently,
    • 0.7.12: A bunch of dependencies updates,
  • Ich kann 0.7.12 nicht empfehlen. Bei der Installation eines Systems mit PCIe NVMe SSD auf einem ROCKPro64 v2.0 4GB RAM habe ich folgenden Fehler gehabt.

    Danach war die Partition auf der SSD weg.

    Ich bin jetzt wieder auf 0.7.11 mit dem letzten Kernel der funktioniert 4.4.154-1128-rockchip-ayufan

    Dran denken, was ich mit diesem Zeichen ✌ kennzeichne, funktioniert.

  • 0.7.13 released

    • 0.7.13: Enable support for RockPro64 WiFi/BT module,
    • 0.7.13: Fix LXDE build: updated libdrm,

    PCIe NVMe SSD & WiFi = Crash!
    WiFi alleine habe ich bei einem kurzen Test auf stretch minimal zum Laufen bekommen - aber unstabil!

    Alles in allem, noch viel Arbeit. Nur für Leute mit Spaß am Testen geeignet 😉 Morgen, geht's weiter 🙂

  • 0.7.14 released

    • 0.7.14: Update rockchip kernel to 4.4.167,
    • 0.7.14: Update mainline kernel to 5.0,

    Aktuell noch ungetestet.

  • 0.7.14 ist nicht empfehlenswert. (Bei mir zumindestens!!)

    Was geht?

    • WiFi

    Was nicht geht?

    • WiFi & PCIe NVMe SSD zusammen - crash!
    • PCIe NVMe SSD alleine - crash!

    Für mich ist der angebliche Fix, der irgendwie was drumherum bastelt, damit PCIe & WiFi zusammen funktioniert keine Lösung. Das macht jetzt aktuell mehr Probleme als vorher.

    Meine Idee wäre, zwei dts Files, einmal ist WiFi an, für Leute die es brauchen und einmal ist es aus. Hoffentlich findet jemand eine vernünftige Lösung!!

    Ich bleibe weiterhin bei 0.7.11 - absolut stabil, PCIe stabil, SATA läuft (mit der richtigen Karte), auf WiFi kann ich persönlich verzichten!

    Ich möchte hier aber erwähnen, das es wohl Leute gibt, bei denen das funktioniert.

  • Mal ein 0.7.14 Image eingeschmissen und Mainline angetestet. Und jetzt wird es verwirrend..

    Was geht?

    • PCIe (auch mit gestecktem WiFi-Modul)

    Was nicht geht?

    • WiFi

  • Armbian 5.4.0-rc1

    Armbian
    5
    0 Stimmen
    5 Beiträge
    343 Aufrufe
    FrankMF

    Gut, ich bin nicht der einzige, der ständig damit Probleme hat. @tkaiser auch 😉

    1036201d-a4b2-47be-a618-36003c07e0ce-grafik.png

  • Image 0.9.14 - Kurztest

    ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    216 Aufrufe
    Niemand hat geantwortet
  • Images 0.9.x

    Images
    13
    0 Stimmen
    13 Beiträge
    763 Aufrufe
    FrankMF

    0.9.16: gitlab-ci-linux-build-163 released

    0.9.x 0.9.16: Bump kernel to 4.4.197, 0.9.15: Bump kernel to 4.4.193, 0.9.14: Bump kernel to 4.4.190, 0.9.14: Fix Firefox video playback, 0.9.13: Bump sound volume for Pinebook Pro, 0.9.12: Fix LXDE for Rock64, 0.9.10: Fix support for power/standby LEDs for all boards,
  • Images 0.8.x

    Images
    20
    0 Stimmen
    20 Beiträge
    1k Aufrufe
    FrankMF

    0.8.3: gitlab-ci-linux-build-141 released

    0.8.2: Be more strict what packages/kernels are being in use for 0.8.x branch, 0.8.1: The final pre-release,

    Kamil hat diesen Release als Latest release gekennzeichnet. Das heißt man kann jetzt vorhandenen Installationen auf diesen Build upgraden.

    # Pick one sudo apt-get update -y && sudo apt-get install linux-rock64-0.8 -y sudo apt-get update -y && sudo apt-get install linux-rockpro64-0.8 -y sudo apt-get update -y && sudo apt-get install linux-pinebookpro-0.8 -y # Upgrade all other packages sudo apt-get update -y && sudo apt-get dist-upgrade -y # Remove invalid X11 config, and fix bootloaders sudo rm /etc/X11/xorg.conf.d/20-armsoc.conf sudo new_extlinux_boot.sh rootfs sudo rock64_upgrade_bootloader.sh

    Quelle: https://github.com/ayufan-rock64/linux-build/releases/tag/0.8.3

    Kamil ist wohl jetzt mit dem Build so weit zufrieden 😉 Ich wüßte auch nicht wo es jetzt noch richtig klemmt. Eine Sache funktioniert noch nicht perfekt.

    PXE Boot USB3 Boot

    Aber Kamil hat im IRC geschrieben, das er das als nächstes in Angriff nehmen will.

  • Benchmark Mainline 4.17.0-rc6

    Verschoben Archiv
    4
    0 Stimmen
    4 Beiträge
    956 Aufrufe
    FrankMF
    iozone 5GT/s x2 rock64@rockpro64:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Iozone: Performance Test of File I/O Version $Revision: 3.429 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa. Run began: Sat Jun 16 06:34:43 2018 Include fsync in write timing O_DIRECT feature enabled Auto Mode File size set to 102400 kB Record Size 4 kB Record Size 16 kB Record Size 512 kB Record Size 1024 kB Record Size 16384 kB Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 48672 104754 115838 116803 47894 103606 102400 16 168084 276437 292660 295458 162550 273703 102400 512 566572 597648 580005 589209 534508 597007 102400 1024 585621 624443 590545 599177 569452 630098 102400 16384 504871 754710 765558 780592 777696 753426 iozone test complete. 2,5GT/s x2 rock64@rockpro64:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Iozone: Performance Test of File I/O Version $Revision: 3.429 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa. Run began: Sun Jun 17 06:54:02 2018 Include fsync in write timing O_DIRECT feature enabled Auto Mode File size set to 102400 kB Record Size 4 kB Record Size 16 kB Record Size 512 kB Record Size 1024 kB Record Size 16384 kB Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 49420 91310 102658 103415 47023 90099 102400 16 138141 202088 224648 225918 141642 202457 102400 512 335055 347517 375096 378596 364668 350005 102400 1024 345508 354999 378947 382733 375315 354783 102400 16384 306262 383155 424403 429423 428670 377476 iozone test complete.
  • u-boot-flash-spi-rockpro64.img.xz

    Verschoben Tools
    1
    0 Stimmen
    1 Beiträge
    1k Aufrufe
    Niemand hat geantwortet
  • 0 Stimmen
    1 Beiträge
    655 Aufrufe
    Niemand hat geantwortet
  • Neue Bilder

    ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    672 Aufrufe
    Niemand hat geantwortet