ROCK Pi E



  • Radxa.jpg
    Bildquelle

    Hersteller

    Herstellerseite

    Hardware

    Prozessor:

    Rockchip RK3328 SOC Vierkern-Kortex A53 bis zu 1,5GHz
    Neon- und FPU-Coprozessor mit gemeinsamem L2-Cache
    Mali-450MP4-GPU

    RAM

    256MB/512MB/1GB

    Netzwerk Varianten:

    1x Gigabit ETH
    1x 100Mbit ETH
    WIFI a/b/g/n + Bluetooth 4.2
    WIFI a/c + Bluetooth 4.2
    WIFI + Bluetooth 4.2 + PoE

    Schnittstellen:

    USB A 3.0-Anschluss
    Audio-Anschluss
    USB-C-Anschluss für die Stromversorgung (OTG)

    Datenspeicher

    TF-Karten-Schnittstelle (bis zu 128 GB)
    eMMC 5.1-Schnittstelle

    Quelle

    Software

    Das Armbian Team versorgt uns mit einem Debian Buster.



  • Ein paar eigene Bilder 😉

    IMG_20200812_170018_ergebnis.jpg

    IMG_20200812_170129_ergebnis.jpg

    IMG_20200812_170142_ergebnis.jpg

    Und das Ganze in Betrieb

    IMG_20200812_183216_ergebnis.jpg

    frank@frank:~$ ssh root@192.168.3.14
    root@192.168.3.14's password: 
     ____   ___   ____ _  __  ____  _   _____ 
    |  _ \ / _ \ / ___| |/ / |  _ \(_) | ____|
    | |_) | | | | |   | ' /  | |_) | | |  _|  
    |  _ <| |_| | |___| . \  |  __/| | | |___ 
    |_| \_\\___/ \____|_|\_\ |_|   |_| |_____|
                                              
    Welcome to Armbian buster with Linux 5.4.47-rockchip64
    
    No end-user support: work in progress
    
    System load:   0.00 0.00 0.00  	Up time:       36 min		
    Memory usage:  22 % of 473MB  	IP:            192.168.3.14
    CPU temp:      62°C           	
    Usage of /:    5% of 29G    	
    
    Last login: Wed Aug 12 18:02:29 2020 from 192.168.3.213
    

    iperf

    root@rockpi-e:~# iperf3 -c 192.168.3.213
    Connecting to host 192.168.3.213, port 5201
    [  5] local 192.168.3.14 port 43150 connected to 192.168.3.213 port 5201
    [ ID] Interval           Transfer     Bitrate         Retr  Cwnd
    [  5]   0.00-1.00   sec   101 MBytes   845 Mbits/sec    0   3.70 MBytes       
    [  5]   1.00-2.00   sec   102 MBytes   858 Mbits/sec    0   4.64 MBytes       
    [  5]   2.00-3.00   sec   105 MBytes   880 Mbits/sec    0   4.76 MBytes       
    [  5]   3.00-4.00   sec   105 MBytes   876 Mbits/sec    0   4.76 MBytes       
    [  5]   4.00-5.00   sec   106 MBytes   888 Mbits/sec   66   1.19 MBytes       
    [  5]   5.00-6.01   sec   110 MBytes   921 Mbits/sec    2    308 KBytes       
    [  5]   6.01-7.01   sec   111 MBytes   933 Mbits/sec    0    310 KBytes       
    [  5]   7.01-8.01   sec   111 MBytes   932 Mbits/sec    1    310 KBytes       
    [  5]   8.01-9.00   sec   110 MBytes   931 Mbits/sec    1    310 KBytes       
    [  5]   9.00-10.00  sec   111 MBytes   931 Mbits/sec    1    344 KBytes       
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bitrate         Retr
    [  5]   0.00-10.00  sec  1.05 GBytes   899 Mbits/sec   71             sender
    [  5]   0.00-10.01  sec  1.05 GBytes   899 Mbits/sec                  receiver
    
    iperf Done.
    root@rockpi-e:~# iperf3 -R -c 192.168.3.213
    Connecting to host 192.168.3.213, port 5201
    Reverse mode, remote host 192.168.3.213 is sending
    [  5] local 192.168.3.14 port 43154 connected to 192.168.3.213 port 5201
    [ ID] Interval           Transfer     Bitrate
    [  5]   0.00-1.00   sec   112 MBytes   940 Mbits/sec                  
    [  5]   1.00-2.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   2.00-3.00   sec   112 MBytes   942 Mbits/sec                  
    [  5]   3.00-4.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   4.00-5.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   5.00-6.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   6.00-7.00   sec   112 MBytes   942 Mbits/sec                  
    [  5]   7.00-8.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   8.00-9.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   9.00-10.00  sec   112 MBytes   941 Mbits/sec                  
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bitrate         Retr
    [  5]   0.00-10.00  sec  1.10 GBytes   943 Mbits/sec    0             sender
    [  5]   0.00-10.00  sec  1.10 GBytes   941 Mbits/sec                  receiver
    
    iperf Done.
    

    Kernel

    root@rockpi-e:~# uname -a
    Linux rockpi-e 5.4.47-rockchip64 #20.05.6 SMP PREEMPT Sat Jun 20 23:55:40 UTC 2020 aarch64 GNU/Linux
    

    Debian Version

    Nach

    apt update & apt upgrade
    

    bekommen wir

    root@rockpi-e:/etc# cat /etc/debian_version
    10.5
    

    also ein Debian Buster 10.5

    ip a

    root@rockpi-e:/etc# ip a
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
        link/ether 62:ac:5f:a1:72:e9 brd ff:ff:ff:ff:ff:ff
        inet 192.168.3.14/24 brd 192.168.3.255 scope global dynamic noprefixroute eth0
           valid_lft 6978sec preferred_lft 6978sec
        inet6 2a02:908:1265:fbf0:3383:7c5b:61bd:37b3/64 scope global dynamic noprefixroute 
           valid_lft 7188sec preferred_lft 588sec
        inet6 fe80::20b1:e533:69d5:f1e8/64 scope link noprefixroute 
           valid_lft forever preferred_lft forever
    3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
        link/ether 62:ac:5f:a1:72:09 brd ff:ff:ff:ff:ff:ff
    4: wlx38014640991e: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
        link/ether 38:01:46:40:99:1e brd ff:ff:ff:ff:ff:ff
    

    und

    root@rockpi-e:/etc# iwconfig
    wlx38014640991e  unassociated  Nickname:"<WIFI@REALTEK>"
              Mode:Auto  Frequency=2.412 GHz  Access Point: Not-Associated   
              Sensitivity:0/0  
              Retry:off   RTS thr:off   Fragment thr:off
              Encryption key:off
              Power Management:off
              Link Quality:0  Signal level:0  Noise level:0
              Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
              Tx excessive retries:0  Invalid misc:0   Missed beacon:0
    
    lo        no wireless extensions.
    
    eth0      no wireless extensions.
    
    eth1      no wireless extensions.
    

    Bluetooth

    Installation

    root@rockpi-e:/etc# apt install bluetooth bluez libbluetooth-dev libudev-dev libcap2-bin
    

    Testen

    root@rockpi-e:/etc# service bluetooth status
    ● bluetooth.service - Bluetooth service
       Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
       Active: active (running) since Wed 2020-08-12 18:56:37 CEST; 12s ago
         Docs: man:bluetoothd(8)
     Main PID: 1751 (bluetoothd)
       Status: "Running"
        Tasks: 1 (limit: 396)
       Memory: 1.2M
       CGroup: /system.slice/bluetooth.service
               └─1751 /usr/lib/bluetooth/bluetoothd
    
    Aug 12 18:56:37 rockpi-e systemd[1]: Starting Bluetooth service...
    Aug 12 18:56:37 rockpi-e bluetoothd[1751]: Bluetooth daemon 5.50
    Aug 12 18:56:37 rockpi-e systemd[1]: Started Bluetooth service.
    Aug 12 18:56:37 rockpi-e bluetoothd[1751]: Starting SDP server
    Aug 12 18:56:37 rockpi-e bluetoothd[1751]: Bluetooth management interface 1.14 initialized
    

    und

    root@rockpi-e:/etc# hciconfig --all
    hci0:	Type: Primary  Bus: USB
    	BD Address: 00:00:00:00:00:00  ACL MTU: 0:0  SCO MTU: 0:0
    	DOWN 
    	RX bytes:21 acl:0 sco:0 events:2 errors:0
    	TX bytes:6 acl:0 sco:0 commands:2 errors:0
    	Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    	Packet type: DM1 DH1 HV1 
    	Link policy: 
    	Link mode: SLAVE ACCEPT 
    

    Das soll es, für heute, mal gewesen sein. Zu warm 🙂 Also, nicht dem RockPiE sondern mir...



  • eth1

    Die zweite LAN-Schnittstelle macht nur 100Mbit/s

    oot@rockpi-e:~# iperf3 -c 10.10.1.3
    Connecting to host 10.10.1.3, port 5201
    [  5] local 10.10.1.2 port 59576 connected to 10.10.1.3 port 5201
    [ ID] Interval           Transfer     Bitrate         Retr  Cwnd
    [  5]   0.00-1.00   sec  13.0 MBytes   109 Mbits/sec    0    344 KBytes       
    [  5]   1.00-2.00   sec  10.9 MBytes  91.7 Mbits/sec    0    344 KBytes       
    [  5]   2.00-3.00   sec  11.1 MBytes  93.3 Mbits/sec    0    344 KBytes       
    [  5]   3.00-4.00   sec  11.7 MBytes  98.5 Mbits/sec    0    344 KBytes       
    [  5]   4.00-5.00   sec  11.1 MBytes  93.3 Mbits/sec    0    344 KBytes       
    [  5]   5.00-6.00   sec  11.0 MBytes  92.3 Mbits/sec    0    344 KBytes       
    [  5]   6.00-7.00   sec  11.1 MBytes  93.3 Mbits/sec    0    344 KBytes       
    [  5]   7.00-8.00   sec  11.1 MBytes  92.8 Mbits/sec    0    344 KBytes       
    [  5]   8.00-9.00   sec  11.8 MBytes  99.0 Mbits/sec    0    344 KBytes       
    [  5]   9.00-10.00  sec  11.1 MBytes  93.3 Mbits/sec    0    344 KBytes       
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bitrate         Retr
    [  5]   0.00-10.00  sec   114 MBytes  95.7 Mbits/sec    0             sender
    [  5]   0.00-10.01  sec   112 MBytes  94.1 Mbits/sec                  receiver
    
    iperf Done.
    root@rockpi-e:~# iperf3 -R -c 10.10.1.3
    Connecting to host 10.10.1.3, port 5201
    Reverse mode, remote host 10.10.1.3 is sending
    [  5] local 10.10.1.2 port 59580 connected to 10.10.1.3 port 5201
    [ ID] Interval           Transfer     Bitrate
    [  5]   0.00-1.00   sec  11.2 MBytes  94.2 Mbits/sec                  
    [  5]   1.00-2.00   sec  11.2 MBytes  93.9 Mbits/sec                  
    [  5]   2.00-3.00   sec  11.2 MBytes  93.9 Mbits/sec                  
    [  5]   3.00-4.00   sec  11.2 MBytes  93.9 Mbits/sec                  
    [  5]   4.00-5.00   sec  11.2 MBytes  93.9 Mbits/sec                  
    [  5]   5.00-6.00   sec  11.2 MBytes  93.9 Mbits/sec                  
    [  5]   6.00-7.00   sec  11.2 MBytes  93.9 Mbits/sec                  
    [  5]   7.00-8.00   sec  11.2 MBytes  93.9 Mbits/sec                  
    [  5]   8.00-9.00   sec  11.2 MBytes  93.9 Mbits/sec                  
    [  5]   9.00-10.00  sec  11.2 MBytes  93.9 Mbits/sec                  
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bitrate         Retr
    [  5]   0.00-10.00  sec   113 MBytes  94.6 Mbits/sec    0             sender
    [  5]   0.00-10.00  sec   112 MBytes  94.0 Mbits/sec                  receiver
    
    iperf Done.
    

    Hier alles in Betrieb 😉

    root@rockpi-e:~# ip a
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
        link/ether 62:ac:5f:a1:72:e9 brd ff:ff:ff:ff:ff:ff
        inet 192.168.3.14/24 brd 192.168.3.255 scope global dynamic noprefixroute eth0
           valid_lft 6829sec preferred_lft 6829sec
        inet6 2a02:908:1265:fbf0:xxxx/64 scope global dynamic noprefixroute 
           valid_lft 7173sec preferred_lft 573sec
        inet6 fe80::20b1:e533:69d5:f1e8/64 scope link noprefixroute 
           valid_lft forever preferred_lft forever
    3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
        link/ether 62:ac:5f:a1:72:09 brd ff:ff:ff:ff:ff:ff
        inet 10.10.1.2/24 scope global eth1
           valid_lft forever preferred_lft forever
    4: wlx38014640991e: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
        link/ether 38:01:46:40:99:1e brd ff:ff:ff:ff:ff:ff
        inet 192.168.178.26/24 brd 192.168.178.255 scope global dynamic noprefixroute wlx38014640991e
           valid_lft 863627sec preferred_lft 863627sec
        inet6 2a02:908:1265:fbe0:xxx/64 scope global dynamic noprefixroute 
           valid_lft 6829sec preferred_lft 3229sec
        inet6 fe80::ac16:7a52:ac7b:13d3/64 scope link noprefixroute 
           valid_lft forever preferred_lft forever
    

    Und dann noch

    USB3

    Mal schnell eine SSD angeklemmt, nix besonderes.

    oot@rockpi-e:~# lsusb
    Bus 005 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. JMS567 SATA 6Gb/s bridge
    Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 002: ID 0bda:d723 Realtek Semiconductor Corp. 
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    

    dd

    root@rockpi-e:/tmp/home/rock64# dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
    4096+0 Datensätze ein
    4096+0 Datensätze aus
    4294967296 bytes (4,3 GB, 4,0 GiB) copied, 45,8441 s, 93,7 MB/s
    

    So weit sollte alles funktionieren. Mal schauen was ich damit mache...


Log in to reply
 

Diese Artikel könnten Dich auch interessieren.

  • 1
  • 3
  • 5
  • 4
  • 1
  • 1
  • 3
  • 1