AtomicPi - LAN Geschwindigkeit



  • Software

    Das System was ich hier teste ist ein Ubuntu mit LXDE Oberfläche.

    Welcome to Ubuntu 18.04.2 LTS (GNU/Linux 4.15.18-dli x86_64)
    Linux localhost 4.15.18-dli #1 SMP Fri Feb 22 15:10:35 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
    

    Test

    atomicpi@localhost:~$ iperf3 -c 192.168.3.213
    Connecting to host 192.168.3.213, port 5201
    [  4] local 192.168.3.10 port 59314 connected to 192.168.3.213 port 5201
    [ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
    [  4]   0.00-1.00   sec   112 MBytes   939 Mbits/sec  152   76.4 KBytes       
    [  4]   1.00-2.00   sec   110 MBytes   926 Mbits/sec  119   99.0 KBytes       
    [  4]   2.00-3.01   sec  98.8 MBytes   822 Mbits/sec    0   99.0 KBytes       
    [  4]   3.01-4.01   sec  98.8 MBytes   826 Mbits/sec    0   99.0 KBytes       
    [  4]   4.01-5.01   sec  97.5 MBytes   822 Mbits/sec    0   99.0 KBytes       
    [  4]   5.01-6.01   sec  98.8 MBytes   826 Mbits/sec    0   99.0 KBytes       
    [  4]   6.01-7.01   sec  97.5 MBytes   822 Mbits/sec    0   99.0 KBytes       
    [  4]   7.01-8.01   sec  98.8 MBytes   824 Mbits/sec    0   99.0 KBytes       
    [  4]   8.01-9.01   sec  97.5 MBytes   819 Mbits/sec    0   99.0 KBytes       
    [  4]   9.01-10.01  sec  98.8 MBytes   828 Mbits/sec    0   99.0 KBytes       
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bandwidth       Retr
    [  4]   0.00-10.01  sec  1009 MBytes   845 Mbits/sec  271             sender
    [  4]   0.00-10.01  sec  1009 MBytes   845 Mbits/sec                  receiver
    
    iperf Done.
    atomicpi@localhost:~$ iperf3 -R -c 192.168.3.213
    Connecting to host 192.168.3.213, port 5201
    Reverse mode, remote host 192.168.3.213 is sending
    [  4] local 192.168.3.10 port 59322 connected to 192.168.3.213 port 5201
    [ ID] Interval           Transfer     Bandwidth
    [  4]   0.00-1.00   sec   112 MBytes   938 Mbits/sec                  
    [  4]   1.00-2.00   sec   112 MBytes   941 Mbits/sec                  
    [  4]   2.00-3.00   sec   112 MBytes   941 Mbits/sec                  
    [  4]   3.00-4.00   sec   112 MBytes   941 Mbits/sec                  
    [  4]   4.00-5.00   sec   112 MBytes   941 Mbits/sec                  
    [  4]   5.00-6.00   sec   112 MBytes   941 Mbits/sec                  
    [  4]   6.00-7.00   sec   112 MBytes   939 Mbits/sec                  
    [  4]   7.00-8.00   sec   112 MBytes   941 Mbits/sec                  
    [  4]   8.00-9.00   sec   112 MBytes   941 Mbits/sec                  
    [  4]   9.00-10.00  sec   112 MBytes   941 Mbits/sec                  
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bandwidth       Retr
    [  4]   0.00-10.00  sec  1.10 GBytes   941 Mbits/sec    0             sender
    [  4]   0.00-10.00  sec  1.10 GBytes   941 Mbits/sec                  receiver
    
    iperf Done.


  • Auf meiner Debian Buster Installation volle Pulle ūüôā

    root@debian:/home/frank# iperf3 -c 192.168.3.213
    Connecting to host 192.168.3.213, port 5201
    [  5] local 192.168.3.12 port 59828 connected to 192.168.3.213 port 5201
    [ ID] Interval           Transfer     Bitrate         Retr  Cwnd
    [  5]   0.00-1.00   sec   114 MBytes   954 Mbits/sec    0    300 KBytes       
    [  5]   1.00-2.00   sec   112 MBytes   939 Mbits/sec    0    300 KBytes       
    [  5]   2.00-3.00   sec   112 MBytes   941 Mbits/sec    0    300 KBytes       
    [  5]   3.00-4.00   sec   113 MBytes   945 Mbits/sec    0    300 KBytes       
    [  5]   4.00-5.00   sec   112 MBytes   937 Mbits/sec    0    314 KBytes       
    [  5]   5.00-6.00   sec   112 MBytes   942 Mbits/sec    0    314 KBytes       
    [  5]   6.00-7.00   sec   112 MBytes   942 Mbits/sec    0    314 KBytes       
    [  5]   7.00-8.00   sec   113 MBytes   944 Mbits/sec    0    314 KBytes       
    [  5]   8.00-9.00   sec   112 MBytes   937 Mbits/sec    0    314 KBytes       
    [  5]   9.00-10.00  sec   112 MBytes   943 Mbits/sec    0    314 KBytes       
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bitrate         Retr
    [  5]   0.00-10.00  sec  1.10 GBytes   942 Mbits/sec    0             sender
    [  5]   0.00-10.00  sec  1.10 GBytes   941 Mbits/sec                  receiver
    
    iperf Done.
    root@debian:/home/frank# iperf3 -R -c 192.168.3.213
    Connecting to host 192.168.3.213, port 5201
    Reverse mode, remote host 192.168.3.213 is sending
    [  5] local 192.168.3.12 port 59834 connected to 192.168.3.213 port 5201
    [ ID] Interval           Transfer     Bitrate
    [  5]   0.00-1.00   sec   112 MBytes   942 Mbits/sec                  
    [  5]   1.00-2.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   2.00-3.00   sec   112 MBytes   936 Mbits/sec                  
    [  5]   3.00-4.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   4.00-5.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   5.00-6.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   6.00-7.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   7.00-8.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   8.00-9.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   9.00-10.00  sec   112 MBytes   941 Mbits/sec                  
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bitrate         Retr
    [  5]   0.00-10.00  sec  1.10 GBytes   941 Mbits/sec    0             sender
    [  5]   0.00-10.00  sec  1.10 GBytes   941 Mbits/sec                  receiver
    
    iperf Done.

Log in to reply
 

Diese Artikel könnten Dich auch interessieren.

  • 4
  • 4
  • 2
  • 5
  • 6
  • 2
  • 2
  • 7