Skip to content

stretch-minimal-rockpro64

Verschoben Linux
  • INFO'S

    ANWENDUNG

    Das Image auf eine SD-Karte schreiben, den ROCKPro64 damit starten.

    Status

    Startet nicht - Fehler!

  • Mit 0.7.2 startet das Image. LAN ok.

    rock64@rockpro64:~$ iperf3 -c 192.168.3.213
    Connecting to host 192.168.3.213, port 5201
    [  4] local 192.168.3.9 port 33558 connected to 192.168.3.213 port 5201
    [ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
    [  4]   0.00-1.00   sec   116 MBytes   970 Mbits/sec    0    938 KBytes       
    [  4]   1.00-2.00   sec   112 MBytes   942 Mbits/sec    0   1012 KBytes       
    [  4]   2.00-3.00   sec   112 MBytes   942 Mbits/sec    0   1.00 MBytes       
    [  4]   3.00-4.00   sec   112 MBytes   941 Mbits/sec    0   1.11 MBytes       
    [  4]   4.00-5.00   sec   112 MBytes   941 Mbits/sec    0   1.11 MBytes       
    [  4]   5.00-6.00   sec   112 MBytes   941 Mbits/sec    0   1.11 MBytes       
    [  4]   6.00-7.00   sec   106 MBytes   890 Mbits/sec    0   6.01 MBytes       
    [  4]   7.00-8.00   sec   113 MBytes   952 Mbits/sec    0   6.01 MBytes       
    [  4]   8.00-9.00   sec   112 MBytes   941 Mbits/sec    0   6.01 MBytes       
    [  4]   9.00-10.00  sec   112 MBytes   942 Mbits/sec    0   6.01 MBytes       
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bandwidth       Retr
    [  4]   0.00-10.00  sec  1.09 GBytes   940 Mbits/sec    0             sender
    [  4]   0.00-10.00  sec  1.09 GBytes   937 Mbits/sec                  receiver
    
    iperf Done.
    rock64@rockpro64:~$ iperf3 -s              
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------
    Accepted connection from 192.168.3.213, port 51756
    [  5] local 192.168.3.9 port 5201 connected to 192.168.3.213 port 51758
    [ ID] Interval           Transfer     Bandwidth
    [  5]   0.00-1.00   sec   110 MBytes   923 Mbits/sec                  
    [  5]   1.00-2.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   2.00-3.00   sec   112 MBytes   942 Mbits/sec                  
    [  5]   3.00-4.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   4.00-5.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   5.00-6.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   6.00-7.00   sec   112 MBytes   942 Mbits/sec                  
    [  5]   7.00-8.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   8.00-9.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   9.00-10.00  sec   112 MBytes   942 Mbits/sec                  
    [  5]  10.00-10.02  sec  1.79 MBytes   931 Mbits/sec                  
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bandwidth
    [  5]   0.00-10.02  sec  0.00 Bytes  0.00 bits/sec                  sender
    [  5]   0.00-10.02  sec  1.10 GBytes   940 Mbits/sec                  receiver
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------
    ^Ciperf3: interrupt - the server has terminated
    
  • Mal ein Test was der Speicher so kann.

    rock64@rockpro64:~/tinymembench$ ./tinymembench
    tinymembench v0.4.9 (simple benchmark for memory throughput and latency)
    
    ==========================================================================
    == Memory bandwidth tests                                               ==
    ==                                                                      ==
    == Note 1: 1MB = 1000000 bytes                                          ==
    == Note 2: Results for 'copy' tests show how many bytes can be          ==
    ==         copied per second (adding together read and writen           ==
    ==         bytes would have provided twice higher numbers)              ==
    == Note 3: 2-pass copy means that we are using a small temporary buffer ==
    ==         to first fetch data into it, and only then write it to the   ==
    ==         destination (source -> L1 cache, L1 cache -> destination)    ==
    == Note 4: If sample standard deviation exceeds 0.1%, it is shown in    ==
    ==         brackets                                                     ==
    ==========================================================================
    
     C copy backwards                                     :   2812.7 MB/s
     C copy backwards (32 byte blocks)                    :   2811.9 MB/s
     C copy backwards (64 byte blocks)                    :   2632.8 MB/s
     C copy                                               :   2667.2 MB/s
     C copy prefetched (32 bytes step)                    :   2633.5 MB/s
     C copy prefetched (64 bytes step)                    :   2640.8 MB/s
     C 2-pass copy                                        :   2509.8 MB/s
     C 2-pass copy prefetched (32 bytes step)             :   2431.6 MB/s
     C 2-pass copy prefetched (64 bytes step)             :   2424.1 MB/s
     C fill                                               :   4887.7 MB/s (0.5%)
     C fill (shuffle within 16 byte blocks)               :   4883.0 MB/s
     C fill (shuffle within 32 byte blocks)               :   4889.3 MB/s
     C fill (shuffle within 64 byte blocks)               :   4889.2 MB/s
     ---
     standard memcpy                                      :   2807.3 MB/s
     standard memset                                      :   4890.4 MB/s (0.3%)
     ---
     NEON LDP/STP copy                                    :   2803.7 MB/s
     NEON LDP/STP copy pldl2strm (32 bytes step)          :   2802.1 MB/s
     NEON LDP/STP copy pldl2strm (64 bytes step)          :   2800.7 MB/s
     NEON LDP/STP copy pldl1keep (32 bytes step)          :   2745.5 MB/s
     NEON LDP/STP copy pldl1keep (64 bytes step)          :   2745.8 MB/s
     NEON LD1/ST1 copy                                    :   2801.9 MB/s
     NEON STP fill                                        :   4888.9 MB/s (0.3%)
     NEON STNP fill                                       :   4850.1 MB/s
     ARM LDP/STP copy                                     :   2803.8 MB/s
     ARM STP fill                                         :   4893.0 MB/s (0.5%)
     ARM STNP fill                                        :   4851.7 MB/s
    
    ==========================================================================
    == Framebuffer read tests.                                              ==
    ==                                                                      ==
    == Many ARM devices use a part of the system memory as the framebuffer, ==
    == typically mapped as uncached but with write-combining enabled.       ==
    == Writes to such framebuffers are quite fast, but reads are much       ==
    == slower and very sensitive to the alignment and the selection of      ==
    == CPU instructions which are used for accessing memory.                ==
    ==                                                                      ==
    == Many x86 systems allocate the framebuffer in the GPU memory,         ==
    == accessible for the CPU via a relatively slow PCI-E bus. Moreover,    ==
    == PCI-E is asymmetric and handles reads a lot worse than writes.       ==
    ==                                                                      ==
    == If uncached framebuffer reads are reasonably fast (at least 100 MB/s ==
    == or preferably >300 MB/s), then using the shadow framebuffer layer    ==
    == is not necessary in Xorg DDX drivers, resulting in a nice overall    ==
    == performance improvement. For example, the xf86-video-fbturbo DDX     ==
    == uses this trick.                                                     ==
    ==========================================================================
    
     NEON LDP/STP copy (from framebuffer)                 :    602.5 MB/s
     NEON LDP/STP 2-pass copy (from framebuffer)          :    551.6 MB/s
     NEON LD1/ST1 copy (from framebuffer)                 :    667.1 MB/s
     NEON LD1/ST1 2-pass copy (from framebuffer)          :    605.6 MB/s
     ARM LDP/STP copy (from framebuffer)                  :    445.3 MB/s
     ARM LDP/STP 2-pass copy (from framebuffer)           :    428.8 MB/s
    
    ==========================================================================
    == Memory latency test                                                  ==
    ==                                                                      ==
    == Average time is measured for random memory accesses in the buffers   ==
    == of different sizes. The larger is the buffer, the more significant   ==
    == are relative contributions of TLB, L1/L2 cache misses and SDRAM      ==
    == accesses. For extremely large buffer sizes we are expecting to see   ==
    == page table walk with several requests to SDRAM for almost every      ==
    == memory access (though 64MiB is not nearly large enough to experience ==
    == this effect to its fullest).                                         ==
    ==                                                                      ==
    == Note 1: All the numbers are representing extra time, which needs to  ==
    ==         be added to L1 cache latency. The cycle timings for L1 cache ==
    ==         latency can be usually found in the processor documentation. ==
    == Note 2: Dual random read means that we are simultaneously performing ==
    ==         two independent memory accesses at a time. In the case if    ==
    ==         the memory subsystem can't handle multiple outstanding       ==
    ==         requests, dual random read has the same timings as two       ==
    ==         single reads performed one after another.                    ==
    ==========================================================================
    
    block size : single random read / dual random read
          1024 :    0.0 ns          /     0.0 ns 
          2048 :    0.0 ns          /     0.0 ns 
          4096 :    0.0 ns          /     0.0 ns 
          8192 :    0.0 ns          /     0.0 ns 
         16384 :    0.0 ns          /     0.0 ns 
         32768 :    0.0 ns          /     0.0 ns 
         65536 :    4.5 ns          /     7.2 ns 
        131072 :    6.8 ns          /     9.7 ns 
        262144 :    9.8 ns          /    12.8 ns 
        524288 :   11.4 ns          /    14.7 ns 
       1048576 :   16.0 ns          /    22.6 ns 
       2097152 :  114.0 ns          /   175.3 ns 
       4194304 :  161.7 ns          /   219.9 ns 
       8388608 :  190.7 ns          /   241.5 ns 
      16777216 :  205.3 ns          /   250.5 ns 
      33554432 :  212.9 ns          /   255.5 ns 
      67108864 :  222.3 ns          /   271.1 ns